Kompernass Hot Beverage Maker KH 1134 User Manual

WATER BOILER  
KH 1134  
WATER BOILER  
Operating instructions  
 
6
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH1134-11/07-V1  
 
CONTENT  
PAGE  
Intended Use  
4
4
4
4
5
Technical Data  
Operating elements  
Safety Instructions  
Starting Up the Device  
Boiling Water  
Temperature regulator in the boiling range  
5
5
5
Temperature regulator in the keep warm range  
Cleaning and Care  
Storage  
6
6
7
7
7
Disposal  
Warranty & Service  
Importer  
Read the operating instructions carefully before using the appliance for the first time and preserve this boo-  
klet for later reference. Pass the manual on to whomsoever might acquire the scale at a later date.  
- 3 -  
 
WATER BOILER  
Safety Instructions  
Intended Use  
ƽ To avoid the risk of fatalities from electric  
shocks:  
This device is intended for heating water for house-  
hold use. It is not intended for use with other liquids  
or for commercial use.  
• Make certain that the base  
with the electrical  
t
connections never comes into contact with  
water! Let the base become completely dry  
t
before using if it has accidentally become wet.  
• Only use the hot water kettle with the supplied  
Technical Data  
base  
.
t
• Make sure that the power cord never becomes  
wet or damp during operation. Lay the cord such  
that it cannot be pinched or otherwise  
Voltage:  
220 - 240 V / 50 Hz  
~
Power consumption: 2500 - 3000 W  
damaged.  
In older electrical installations, the building  
fuse (12A) may be triggered due to the high  
power consumption.  
• Arrange for defective power plugs and/or  
cables to be replaced as soon as possible by a  
qualified technician or by our Customer Service  
Department to avoid the risk of injury.  
• Always pull the plug out of the power socket  
after use. Switching off the device is not sufficient  
because the device receives power as long as  
the power plug is connected to the socket.  
Operating elements  
Lid  
q
w
e
r
t
y
u
i
o
Unlocking button  
ON/OFF switch  
Operating light  
Base  
ƽ To prevent the risk of fire or injury:  
• Always heat water with a closed lid , otherwi-  
q
se the automatic cut-out mechanism doesn’t  
work. Boiling water can then spray out over the  
edge.  
Temperature control  
Kettle  
Level indicator  
Spout screen  
• Hot steam clouds may be released. The kettle  
is also very hot during operation. Wear oven  
mits.  
u
• Make certain that the device rests firmly and ver-  
tically before switching it on. Boiling water can  
cause an unstabile kettle to fall over.  
• Do not allow individuals (including children) to  
use the appliance whose physical, sensorial or  
mental abilities or lack of experience and know-  
ledge hinder their safe usage of it if they have  
not previously been supervised or instructed in its  
correct usage.  
• Tell children about the appliance and its potenti-  
al dangers so that they do not play with it.  
- 4 -  
 
Starting Up the Device  
• The operating light  
now heating up.  
indicates that the device is  
r
• Before starting up the device, make certain that...  
– the device, plug and power cable are in good  
working order and...  
– all packaging materials have been removed  
from the device.  
Transition-  
range  
• Fill the device with water up to the MAX mark  
and let it come to a full boil once – as described  
in the next section. Pour out this water.  
MIN  
MAX  
Boiling Water  
ƽ Danger! Never place the electrical base  
near water – life-threatening danger!  
Temperature regulator in the boiling  
range  
You should only heat as much water as you need  
directly. That helps you save electricity, water and  
time:  
• The devices switches off automatically and the  
operating light  
is at a full boil.  
goes out as soon as the water  
r
• Lift away the kettle  
for filling!  
u
• Open the lid  
by pressing down on the unlok-  
The ON/OFF switch  
springs out.  
q
e
king button  
.
w
• Hold the kettle  
vertically while filling. Only  
In order to keep the water warm after bringing it to  
u
then will the level indicator  
correctly indicate the water volume.  
on the side  
a boil, set the temperature regulator  
warm range.  
in the keep  
i
y
Press the ON/OFF switch  
down, until it snaps in.  
e
Fill the kettle ...  
u
– at least to the MIN mark so that the device does  
Temperature regulator in the keep  
warm range  
not overheat,  
– no higher than the MAX mark so that no boiling  
water spills out.  
The left end of the keep warm range indicates the  
lower temperature. The right end of the keep warm  
range indicates the higher temperature.  
(The water does not start boiling in the keep warm  
range!).  
• First close the lid ...  
q
• then place the kettle  
straight on the base  
on the base  
until it sits  
u
t
.
t
• Set the desired water temperature using the  
temperature control  
To bring the water to a boil, you must set the  
.
• After reaching the desired temperature, the ap-  
pliance switches off the heating process. The  
y
temperature controller to the MAX position.  
ON/OFF switch  
and the operating lights  
y
e
r
• Now insert the power plug into the power  
remain switched on.  
socket ...  
• and press the ON/OFF switch  
snaps in.  
down until it  
e
- 5 -  
 
Because the device is equipped with a heat  
maintenance function, the device automatically  
begins reheating as soon as the water tempe-  
rature falls below the set temperature.  
Never submerse any parts of the device in  
water or other liquids! This can create the  
risk of a life-threatening electrical shock if  
residual liquid comes into contact with  
powered components.  
The appliance heats until the desired tempera-  
ture is reached. Make sure that the appliance  
does not automatically switch on to the keep  
warm function. Therefore, do not leave the  
appliance unsupervised!  
Before cleaning the device, ....  
• First pull the power plug out of the power socket  
and let the device cool completely.  
• Clean the exterior surfaces and the power cord  
with a slighly damp cloth. Always dry the device  
well before using it again.  
• As soon as the kettle  
is lifted from the base  
u
, the ON/OFF switch  
t
jumps out and the  
e
operating lights  
• In order to halt the heating process, push the  
switch off.  
• Never use any cleansers, abbrasive substances  
or solvents. These can damage the device.  
r
ON/OFF switch up again. The operating  
e
light  
goes out then as well.  
In the event of calcium deposits  
• Purchase a decalcifying agent suitable for use  
with food containers from a household goods  
stores (e.g. coffee machine decalcifier).  
• You can use a suitable product from a  
specialised dealer for the stainless steel  
container bottom.  
r
Avoid setting the temperature regulator in  
y
the transition range, as the water can start boi-  
ling on account of varying filling levels.  
ƽ Warning: Pull the power plug from the  
socket before lifting the kettle  
from the  
u
base . This prevents any water  
Removing / replacing the spout screen  
• Open the lid completely.  
• Press down on the edge of the spout screen from  
above in order to remove it toward the inside.  
t
splashing out from contacting the electrical  
connections in the base, which could cause  
a short circuit.  
• Clean the spout screen  
moistened wash cloth.  
• After cleaning, insert the screen from above and  
press it firmly into place.  
with a lightly  
o
For safety reasons, the lid should not be  
opened while the water is boiling or is  
very hot. Otherwise there is a risk of  
injury.  
Storage  
Cleaning and Care  
Let the device cool completely before storing it.  
• Wind the power cord around the holder on the  
bottom of the device.  
ƽ Danger!: Do not open any part of the  
housing. There are no operating elements  
inside. An open housing can create the risk  
of a life-threatening electrical shock.  
• Store the device in a dry place.  
- 6 -  
 
Disposal  
DES Ltd  
Units 14-15  
Bilston Industrial Estate  
Oxford Street  
Do not dispose of the appliance in your  
normal domestic waste.  
Bilston  
WV14 7EG  
Dispose of the appliance through an approved dis-  
posal centre or at your community waste facility.  
Observe the currently applicable regulations.  
In case of doubt, please contact your waste disposal  
centre.  
Tel.: 0870/787-6177  
Fax: 0870/787-6168  
Kompernass Service Ireland  
c/o Irish Connection  
Dispose of all packaging materials in an  
environmentally friendly manner.  
41 Harbour view  
Howth Co. Dublin  
Tel: 087-99 62 077  
Fax: 18398056  
Warranty & Service  
The warranty for this appliance is for 3 years from  
the date of purchase. The appliance has been  
manu-factured with care and meticulously examined  
before delivery. Please retain your receipt as proof  
of purchase. In the case of a warranty claim, please  
make contact by telephone with our service depart-  
ment. Only in this way can a post-free despatch for  
your goods be assured.  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
D-44867 BOCHUM  
The warranty covers only claims for material and  
maufacturing defects, not for wearing parts or for  
damage to fragile components. This product is for  
private use only and is not intended for commercial  
use.  
The warranty is void in the case of abusive and im-  
proper handling, use of force and internal tampe-  
ring not carried out by our authorized service  
branch. Your statutory rights are not restricted in  
any way by this warranty.  
- 7 -  
 

Jet Tools Lathe JWL 1220VS User Manual
JVC CRT Television C T1421 User Manual
JVC DVD VCR Combo HR XVC11B User Manual
Kenmore Range 7907755 User Manual
Kenwood CD Player KCA S210A User Manual
Kettler Exercise Bike 07938 900 User Manual
King Canada Router KRT 2000 User Manual
KitchenAid Cookware KHMS2050S User Manual
Klipsch Portable Speaker R 5650 S User Manual
Kramer Electronics TV Cables VA 4H User Manual