PET708_QSG_wk7035.qxd 2007-01-19 16:00 Page 1
wk7035
Philips Portable DVD Player PET708
Quick start guide
2
3
1
Connect to TV
Enjoy
Charge
1
1 Switch OFF the set. Attach the battery pack as
shown.
7
White
Red
Yellow
2 You can hear clear ‘click’ sound when it is
successfully attached.
2
8
1 Connect the set to TV as shown.
4
4
3
6
1 Open the lid.
2 Switch ON the set.
3 The GREEN light turns on.
3
4 Open the DVD door using the OPEN switch.
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will
automatically start to playback.
2 Please select appropiate input or source on the
TV. You can consult the owner’s manual of your
TV. (If your TV does not have Audio and Video
inputs, you will need to purchase a RF
3 Connect the supplied adapter to the set and the
AC outlet.
4 RED light turns on.
8 Use control keys on the set or remote control.
5 The battery pack will be fully charged in
approximately 4 hours. When the RED light
goes out, it means that the battery pack is fully
charged.
modulator. Please consult your dealer.)
TIP Your battery will continue to charge while the
player is in use. However, the RED light will be lit
and it will take approximately 8 hours to fully
charge the battery pack.
PHILIPS
3 OPEN HERE
|