Premier Mounts Projector Accessories PDS 010 User Manual

PDS-010 Projector Bracket  
PDS-010 Projector Bracket Installation Instructions  
M4 x 10mm Phillips  
Head Screws  
(Qty 3)  
PDS-010 Bracket  
(Qty 1)  
M4 x 10mm Security  
Head Screws  
(Qty 3)  
Premier Mounts  
3130 E. Miraloma Ave.  
Anaheim, CA 92806  
Phone: (800) 368-9700 Fax: (800) 832-4888  
1. Using a screwdriver, secure the PDS-010 mounting bracket using three (3)  
M4 x 10mm Phillips Head screws. Do not over tighten these screws.  
Overtightening the screws may result in damaging the threaded inserts on  
the projector.  
NOTE: Please refer to the PDS Base Box installation Instructions to attach  
the PDS Base Box to the PDS-010 mounting bracket.  
1. Invert the projector and place it on a soft and flat surface. Remove any foot  
levelers that might possibly prevent the correct installation of the bracket.  
2. Locate the three mounting points located on the bottom of the projector.  
3. Line up the mounting points on the projector with the mounting holes on  
the PDS-010 mounting bracket.  
NOTE: The projector (shown above) is for illustration purposes only.  
Installation Instructions  
Page 1  
IN-PDS010.R0  
 

Philips Cell Phone CT0692BLK User Manual
Philips Digital Photo Frame 10FF3CME 00 User Manual
Philips Fax Machine HFC 325 User Manual
Philips Satellite TV System SLV5405 User Manual
Philips Speaker System FWM570 User Manual
Philips Stereo System SWA2420WH User Manual
Planet Technology Network Card BM 2101 User Manual
Precor Treadmill 95sp User Manual
Premier Mounts Indoor Furnishings RTM S User Manual
PYLE Audio Car Stereo System PLDVD140 User Manual