Sony MP3 Docking Station SRSBTX500 User Manual

4-457-524-22(1)  
Tip  
Tips  
1 Make the Bluetooth connections between the  
system and a Bluetooth music player via  
A2DP, and between the system and a  
When the system is turned on first time, the Bluetooth  
If it is difficult to establish the connection, try the following.  
Troubleshooting  
indicator (blue) starts flashing quickly.  
Activate the app “NFC Easy Connectand move the  
smartphone slightly on the N marked part of the system.  
If the smartphone is in a case, remove it.  
Specifications  
Bluetooth mobile phone via HFP or HSP.  
Speaker section  
VOLUME −/+  
buttons  
Touch the system with the smartphone again to disconnect.  
If you have multiple NFC compatible devices, just touch the  
smartphone to a different device to switch the connection  
to that device. For example, when your smartphone is  
connected with NFC compatible headphones, just touch the  
smartphone to the system to change the Bluetooth  
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
Speaker system  
Satellite speaker:  
Approx. 48 mm (1 15/16 in) dia. × 2  
SOUND button/  
indicator  
Subwoofer:  
Approx. 80 mm (3 1/4 in) dia. × 1  
Enclosure type  
Satellite speaker: Sealed enclosure  
Subwoofer: Passive radiator model  
Tips  
connection to the system (One touch connection switching).  
To use only the calling function of a Bluetooth mobile phone  
that also has a music function, establish Bluetooth  
connection between the system and the mobile phone via  
HFP or HSP, not via A2DP.  
No sound / Sound from only one speaker /  
Low sound level  
(call) button  
AUDIO IN button/  
indicator  
Personal Audio System  
Amplifier section  
Reference output power  
Using AC adaptor: 10 W + 10 W (Satellite  
Operating Instructions  
Mode d’emploi  
Listening to Music  
Depending on the Bluetooth mobile phone, while the  
Bluetooth connection is established via HFP or HSP, the  
other Bluetooth connection via A2DP may also be occupied  
by the same Bluetooth mobile phone. A Bluetooth music  
player cannot be connected with this system in this case.  
BATTERY/CHARGE  
indicator  
speaker, at 1 % harmonic distortion, 1 kHz,  
6 Ω) 20 W (Subwoofer, at 1 % harmonic  
distortion, 100 Hz, 4 Ω)  
Using battery: 4 W + 4 W (Satellite speaker,  
at 10 % harmonic distortion, 1 kHz, 6 Ω)  
8 W (Subwoofer, at 10 % harmonic  
distortion, 100 Hz, 4 Ω)  
You can enjoy music wirelessly, via the Bluetooth function built  
Flashes  
quickly  
N-mark  
in your devices.  
Check that both this system and  
the connected device are turned  
If you are connecting a personal  
computer to the system, make sure  
the audio output setting of the  
computer is set for a Bluetooth  
device.  
BLUETOOTH -PAIRING  
button  
on.  
Note  
Bluetooth indicator  
To make the same connection with the same devices after  
turning the system off, follow this procedure again.  
Bluetooth  
4 Perform the pairing procedure on the  
Communication System  
Bluetooth Specification version 3.0  
Bluetooth Specification Power Class 2  
Maximum communication range  
Line of sight approx. 10 m (30 ft)*1  
Bluetooth device to detect the system.  
Turn up the volume of the system  
and the connected device.  
Pair this system and the Bluetooth  
device again.  
To Enjoy the Sound Effect  
/button  
Output  
5 Select “SRS-BTX500shown in the display of  
the Bluetooth device.  
Setting  
©2013 Sony Corporation Printed in China  
If “SRS- BTX500does not appear on the device’s display,  
repeat from step 2.  
You can enjoy sound effects as desired.  
Illumination lamp  
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)  
Microphone  
SRS-BTX500  
Modulation method  
FHSS  
Compatible Bluetooth Profiles*2  
A2DP (Advanced Audio Distribution  
Profile)  
1 Press the SOUND button to select the sound  
Note  
Operations may vary depending on the Bluetooth device.  
Refer also to the operating instructions supplied with your  
Bluetooth device.  
Check that the connected device is  
being played back.  
If the connected device is monaural,  
sound will only be output from the  
left speaker.  
effect.  
Some devices cannot display a list of detected devices.  
The SOUND indicator (see below) shows the current sound  
effect setting.  
You can switch between effects by repeatedly pressing the  
SOUND button.  
6 If Passcode* input is required on the display  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and  
receiver.  
— Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
— Consult the dealer or an experienced radio/TV technician  
for help.  
1 Make the Bluetooth connection between the  
of the Bluetooth device, input “0000.”  
English  
Personal Audio System  
AVRCP (Audio Video Remote Control  
Profile)  
HSP (Headset Profile)  
system and the device.  
The Bluetooth connection is established and the Bluetooth  
indicator (blue) on the system stays on.  
* Passcode may be called “Passkey,“PIN code,“PIN  
number,or “Password.”  
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
Before operating the system, please read this guide  
thoroughly and retain it for future reference.  
HFP (Hands-free Profile)  
Status Sound effect  
Supported Codec*3  
Check that both plugs of the  
connecting cord (not supplied) are  
firmly inserted into the system and  
the connected device.  
Owners Record  
SBC*4, AAC*5  
Amber High-quality bass sound will be heard (MEGA  
BASS). This setting is enabled by default when  
you first turn on the system.  
Tip  
The serial number is located on the bottom.  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
Transmission range (A2DP)  
To pair with other Bluetooth devices, repeat steps 2 to 6 for each  
device.  
2 Start playback on the Bluetooth device, then  
20 Hz - 20,000 Hz (Sampling frequency  
adjust the volume.  
44.1 kHz)  
For the customers in the USA and Canada  
RECYCLING LITHIUM-ION BATTERIES  
Lithium-Ion batteries are recyclable.  
Set the volume of the Bluetooth device to a moderate  
1
Notes  
Green Surround sound will be heard (MEGA  
BASS+SURROUND).  
*
The actual range will vary depending on factors such as  
obstacles between devices, magnetic fields around a  
microwave oven, static electricity, reception sensitivity,  
aerial’s performance, operating system, software  
application, etc.  
Bluetooth standard profiles indicate the purpose of  
Bluetooth communication between devices.  
Codec: Audio signal compression and conversion format  
Subband Codec  
Stand  
level, and press the VOLUME –/+ buttons on the system.  
Pairing mode of the system is cancelled after about 5 minutes,  
and the Bluetooth indicator (blue) flashes. If the pairing mode is  
cancelled while performing this procedure, start over from  
step 3.  
Model No. SRS-BTX500  
Auto power off  
Serial No.________________________________  
The system automatically turns off after about 20 minutes  
when the hands-free is not being used (the system is not  
connected with a Bluetooth device via HFP/HSP), and when no  
device is being charged via the DC OUT ONLY connector, and  
when no music is being played.  
Off  
The sound effect is off.  
You can help preserve our environment  
by returning your used rechargeable  
batteries to the collection and recycling  
location nearest you.  
Passcode of the system is fixed as “0000.The system cannot be  
paired with a Bluetooth device whose Passcode is not “0000.”  
Once Bluetooth devices are paired, there is no need to pair those  
devices again. However, in the following case, you will need to  
perform the pairing procedure again.  
2
*
For customers in the USA  
Please register this product on line at  
Tip  
3
4
5
*
*
*
The system remembers the last sound effect setting next time it  
is turned on.  
Proper registration will enable us to send you  
periodic updates about new products, services  
and other important announcements. Registering  
your product will also allow us to contact you  
in the unlikely event that the product needs  
adjustment or modification. Thank you.  
For more information regarding  
recycling of rechargeable batteries, call toll free  
After use  
Advanced Audio Coding  
The system is paired with 9 or more devices.  
Do any of the following.  
The system can be paired with up to 8 Bluetooth devices. If a  
new device is paired after 8 devices have been paired, the  
device whose latest connection time is the oldest among the  
8 paired devices is replaced by the new one.  
More than one device can be paired with the system, but sound  
will be heard from just one of those devices.  
Distorted sound /  
Humming or noise in the system output  
Microphone  
Set the Bluetooth function of the Bluetooth device off. For  
details, refer to the operating instructions supplied with the  
device.  
Type:  
Directional characteristic:  
Omni directional  
Effective frequency range:  
50 Hz -10 kHz  
Electret condenser  
RESET  
button  
DC OUT ONLY  
connector (USB)  
BLUETOOTH  
AUDIO IN jack  
DC IN 15V  
jack  
Listening to Music by  
Wired Connection with a  
Portable Audio Device,  
etc.  
Caution: Do not handle damaged or leaking Lithium-Ion  
STANDBY switch  
batteries.  
Turn off the Bluetooth device.  
Turn off the system.  
Touch the system with the smartphone again to disconnect  
(NFC compatible smartphones only).  
Turn down the volume of the  
Keep the system away from a TV.  
Precautions  
Notes when using with a mobile phone  
For details on operation of your mobile phone when  
receiving a telephone call while transmitting the sound  
using the Bluetooth connection, refer to the operating  
instructions supplied with the mobile phone.  
Pattern B  
Connecting with a paired  
Bluetooth device  
WARNING  
connected device.  
General  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to rain or moisture.  
Input  
AUDIO IN jack (ø 3.5 mm stereo mini jack)  
Function of Parts  
Turning the System on  
and off/Charging the  
system  
DC OUT  
USB jack Type A (for charging the battery  
of a connected device) (5 V, Max.1.5 A)  
Using Hands-free Calling  
While Listening to Music  
BATTERY/CHARGE indicator  
To reduce the risk of fire, do not cover the ventilation of the  
apparatus with newspapers, tablecloths, curtains, etc. And do  
not place lighted candles on the apparatus.  
1 Connect the device to the system.  
Lights up, flashes or turns off depending on the status of  
the system.  
For details, see the following section, “Indications of BATTERY/  
CHARGE indicator.”  
Power  
DC 15 V (using the supplied AC adaptor  
connected to AC 100 V - 240 V, 50 Hz/60 Hz  
power supply) or, using built-in lithium-ion  
battery  
1 Turn on the system.  
The Bluetooth indicator (blue) flashes.  
If the AUDIO IN indicator (amber) lights up, press the  
BLUETOOTH-PAIRING button.  
If the connected device has an  
equalizer function, set it to off.  
Switch the Bluetooth connection to  
A2DP by operating the Bluetooth  
device when HFP or HSP is set.  
On safety  
You can enjoy hands-free calling via Bluetooth connection  
with a Bluetooth mobile phone that has a music function and  
supports the Bluetooth profile A2DP, and HFP or HSP.  
If your Bluetooth mobile phone supports both HFP and HSP,  
set to HFP.  
To reduce the risk of fire or electric shock, do not expose this  
apparatus to dripping or splashing, and do not place objects  
filled with liquids, such as vases, on the apparatus.  
This system can operate by AC adaptor or built-in lithium-ion  
battery (rechargeable). Charge the battery before using the  
system for the first time.  
Notes on the AC adaptor  
Usage life of lithium-ion battery (using the Bluetooth  
N-mark  
When connecting or disconnecting the AC adaptor, turn off  
2 Set the Bluetooth function of the Bluetooth  
connection)  
Touch to make Bluetooth connection with an NFC  
compatible smartphone.  
approx. 6 hours*6  
the system beforehand. Otherwise, it may cause  
malfunction.  
Use only the supplied AC adaptor. To avoid damaging the  
system, do not use any other AC adaptor.  
Do not install the appliance in a confined space, such as a  
bookcase or built-in cabinet.  
device to on.  
1 Connect the supplied AC adaptor.  
Dimensions (including projecting parts and controls)  
Approx. 385.0 mm × 152.0 mm × 65.0 mm  
(call) button  
The BATTERY/CHARGE indicator (amber) lights up when  
the battery is being charged, and turns off when charging  
is complete. It takes approximately 4 hours to charge the  
battery.  
Tip  
Press to call or operate during a call.  
Do not expose the batteries (battery pack or batteries  
installed) to excessive heat such as sunshine, fire or the like for  
a long time.  
Keep the system away from a  
microwave oven, wireless LAN, etc.  
If you connect a device with a built-  
in radio or tuner to this system,  
broadcasts may not be received, or  
sensitivity may be reduced. Locate  
the system farther away from the  
device and check that you can listen  
to the broadcasts satisfactorily.  
(15 1/4 in × 6 in × 2 5/8 in) (w/h/d)  
In the case of the last-connected Bluetooth device, the  
system tries to re-establish Bluetooth connection with it if  
the device’s Bluetooth function is on. When Bluetooth  
connection is established, the Bluetooth indicator (blue) on  
the system stays on.  
VOLUME −/+ buttons  
Adjusts the volume.  
Mass  
Approx. 2,000 g (4 lb 7 oz)  
including battery  
Illumination lamp  
As the main plug of AC adaptor is used to disconnect the AC  
adaptor from the mains, connect it to an easily accessible AC  
outlet. Should you notice an abnormality in it, disconnect it  
from the AC outlet immediately.  
Supplied accessories  
AC adaptor (AC-E1530) (1)  
(Stereo mini jack)  
Lights up in a variety of colors depending on the status of  
the system. For details, see the following section,  
“Indications of Illumination lamp.”  
Polarity of the plug  
3 Select “SRS-BTX500shown in the display of  
Operating Instructions (this document) (2)  
Bluetooth® Startup Guide (1)  
Plug the AC adaptor into a nearby wall outlet (mains). In the  
case of a problem, unplug it from the wall outlet (mains)  
immediately.  
Do not install the AC adaptor in a confined space, such as a  
bookcase or built-in cabinet.  
To reduce the risk of fire or electric shock, do not expose the  
AC adaptor to dripping or splashing, and do not place  
objects filled with liquids, such as vases, on the AC adaptor.  
the Bluetooth device.  
Microphone  
Use during a call.  
Warranty card (2)  
Carrying case (1)  
Time may vary, depending on the temperature or  
conditions of use.  
Bring this system and the  
Charge the system by connecting  
the AC adaptor if the BATTERY/  
CHARGE indicator flashes in green.  
If necessary, select a Bluetooth profile that the system  
supports from the following: A2DP, HSP or HFP. For details  
on each profile, seeWhat is Bluetooth Wireless Technology?”  
The Bluetooth connection is established and the Bluetooth  
indicator (blue) on the system stays on.  
The unit is not disconnected from the AC power source  
(mains) as long as it is connected to the wall outlet, even if the  
unit itself has been turned off.  
Bluetooth device closer together.  
Remove any obstacle between this  
system and the Bluetooth device.  
Stand  
6
*
Open to use the system.  
The nameplate and important information concerning safety  
are located on the bottom exterior of the main unit and on the  
surface of the AC adaptor.  
DC IN 15V jack  
Design and specifications are subject to change without  
notice.  
Connects the supplied AC adaptor.  
Notes  
Connecting cord (not supplied)  
AUDIO IN jack  
This step may not be necessary for some devices.  
If the system cannot connect to the Bluetooth device, delete  
“SRS-BTX500from the Bluetooth device, then perform  
pairing again.  
On placement  
Connects to the headphone jack of a portable audio device,  
computer, etc., using a connecting cord (not supplied).  
You are cautioned that any changes or modifications not  
expressly approved in this manual could void your authority  
to operate this equipment.  
Do not set the speaker in an inclined position.  
Do not leave the system in a location near heat sources, or  
in a place subject to direct sunlight, excessive dust,  
moisture, rain or mechanical shock.  
2 Turn on the system.  
BLUETOOTH STANDBY switch  
3 Turn on the connected device.  
4 Press the AUDIO IN button on the system.  
5 Operate the connected device.  
Turns on and off the Bluetooth standby mode.  
This equipment must not be co-located or operated in  
conjunction with any other antenna or transmitter.  
Bluetooth standby mode  
When the Bluetooth standby mode is set to ON, the system can  
be turned on and operated by a Bluetooth device.  
RESET button  
Operations may vary depending on the Bluetooth mobile  
phone. Refer also to the operating instructions supplied with  
your mobile phone.  
On operation  
Resets the system.  
Do not insert any small objects, etc., into the jacks or  
ventilation hole on the rear of the system. The system may  
short out or malfunction.  
This equipment complies with FCC/IC radiation exposure  
limits set forth for an uncontrolled environment and meets  
the FCC radio frequency (RF) Exposure Guidelines in  
Supplement C to OET65 and RSS-102 of the IC radio frequency  
(RF) Exposure rules.  
This equipment has very low levels of RF energy that it  
deemed to comply without maximum permissive exposure  
evaluation (MPE). But it is desirable that it should be installed  
and operated keeping the radiator at least 20 cm or more  
away from person’s body (excluding extremities: hands, wrists,  
feet and ankles).  
DC OUT ONLY connector (USB)  
Charges devices, such as your smartphone, etc. by  
connecting to the DC OUT ONLY connector (USB connector).  
Set the volume of the connected device to a moderate  
level, then press the VOLUME –/+ buttons on the system.  
1 Make the Bluetooth connection between the  
2 Press the /button.  
system and the mobile phone.  
On cleaning  
SOUND button  
Pairing is not possible  
Notes  
Do not use alcohol, benzine, or thinner to clean the cabinet.  
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
Press to select a sound effect.  
You cannot play music only by connecting to the system with  
the connecting cord. Make sure to also press the AUDIO IN  
button.  
SOUND indicator  
Others  
Lights up, according to the sound effect setting.  
Bring this system and the Bluetooth  
device to within 1 m of each other.  
If the Bluetooth indicator (blue) is not  
flashing quickly, press and hold the  
BLUETOOTH-PAIRING button on the  
system until two beeps are heard.  
If you have any questions or problems concerning this  
Hands-free calling is not available while you are listening to  
music from a device connecting to the system by the connected  
cord.  
system that are not covered in this manual, please consult  
your nearest Sony dealer.  
AUDIO IN button  
2 Start playback on the Bluetooth mobile  
Press to listen to sound from a device connected by a  
connecting cord (not supplied).  
phone, then adjust the volume.  
Under Industry Canada regulations, this radio transmitter may  
only operate using an antenna of a type and maximum (or  
lesser) gain approved for the transmitter by Industry Canada.  
To reduce potential radio interference to other users, the  
antenna type and its gain should be so chosen that the  
equivalent isotropically radiated power (e.i.r.p.) is not more  
than that necessary for successful communication.  
Auto power off  
AUDIO IN indicator (amber)  
Lights up in AUDIO IN mode.  
Set the volume of the Bluetooth mobile phone to a  
moderate level, and press the VOLUME –/+ buttons on the  
system.  
The system automatically turns off after about 20 minutes  
when the hands-free is not being used (the system is not  
connected with a Bluetooth device via HFP/HSP), and when  
no device is being charged via the DC OUT ONLY connector,  
and when no music is being played.  
What is Bluetooth  
BLUETOOTH-PAIRING button  
Press to pair with a Bluetooth device.  
To call  
Wireless Technology?  
Bluetooth indicator (blue)  
Operate the Bluetooth mobile phone. Check that a dialing  
Bluetooth wireless technology is a short-range wireless  
technology that enables wireless data communication  
between digital devices, such as a computer and digital  
camera. Bluetooth wireless technology operates within a range  
of about 10 m.  
Lights up, flashes or turns off depending on the  
communication status.  
For details, see the following section, “Indications of the  
Bluetooth function.”  
tone is heard on the system and talk using the microphone. If  
no dialing tone is heard, press the  
(call) button on the  
This device complies with Industry Canada license-exempt  
RSS standard(s). Operation is subject to the following two  
conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including  
interference that may cause undesired operation of the  
device.  
system for about 2 seconds to change the call device to the  
system.  
Charging USB Devices,  
such as Smartphones, via  
a USB Connection to the  
System  
/button  
Connecting two devices as necessary is common, but some  
devices can be connected to multiple devices at the same  
time.  
You do not need to use a cable for connection, nor is it  
necessary for the devices to face one another, such is the case  
with infrared technology. For example, you can use such a  
device in a bag or pocket.  
Bluetooth standard is an international standard supported by  
thousands of companies all over the world, and employed by  
various companies worldwide.  
To receive a call  
When an incoming call arrives, the playback pauses and a ring  
Turns the system on/off.  
No voice / Low voice from recipient  
Note  
If the system is being powered by battery, even if the  
system is turned off, battery power will continue to be  
consumed if the BLUETOOTH STANDBY switch is set to ON.  
Tip  
tone is heard from the system. Press the  
the system and talk using the microphone.  
(call) button on  
Indications of BATTERY/CHARGE  
indicator (built-in lithium-ion battery)  
You can operate the system by battery instead of the AC adaptor  
by charging the system before use.  
This Class B digital apparatus complies with Canadian  
ICES-003.  
Tips  
Notes  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has  
two blades and a third grounding prong. The wide blade  
or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
Pattern C  
Check that both this system and  
the connected device are turned  
on.  
Select HFP or HSP Bluetooth  
connection by operating the  
Bluetooth device.  
You can charge your smartphone by connecting it to the DC  
OUT ONLY connector (USB) of the system, even when using  
the system by the built-in battery only. Turn on the system in  
order to charge a USB device.  
Status  
BATTERY/CHARGE indicator  
If no ring tone is heard from the system when incoming call  
When the BATTERY/CHARGE indicator flashes as below,  
arrives, stop playback and press the  
(call) button to talk.  
System turned on  
Lights up (green) (battery  
operation only)  
charge the system. In these cases, you cannot charge  
devices via the DC OUT ONLY connector.  
Connecting with a smartphone  
by One touch (NFC)  
You can use the hands-free calling when playback is completed.  
During a call, press the VOLUME –/+ buttons on the system to  
adjust the volume.  
Flashes (green) (Battery power is low).  
Flashes (amber), then turns off after turning on the system  
(No battery power remaining).  
Flashes (green)  
Lights up (amber)  
Off  
Battery requires charging  
Charging battery  
Communication system and  
compatible Bluetooth profiles of the  
system  
Profile is standardisation of the function for each Bluetooth  
device specification. The system supports the following  
Bluetooth version and profiles:  
Communication System:  
Bluetooth Specification version 3.0  
Compatible Bluetooth Profiles:  
A2DP (Advanced Audio Distribution Profile): Transmitting  
or receiving audio content of high-quality.  
AVRCP (Audio Video Remote Control Profile): Controlling  
the volume.  
HSP (Headset Profile): Talking on the phone/Operating the  
phone.  
By just touching the system with an NFC compatible  
smartphone, the system is turned on automatically and then  
paired and connected with the smartphone.  
Notes  
When you switch the power source between AC adaptor  
and battery by connecting/disconnecting the AC adaptor,  
the system stops sound output for a short while. This is not  
a malfunction.  
The maximum power output will be lower when the AC  
adaptor is disconnected.  
Charging complete  
The sound is output from the left speaker only during a call.  
Use your smartphone at least 50 cm from the system. Noise may  
result if the system and smartphone are too close.  
Check that output of the Bluetooth  
mobile phone is set for the system.  
Turn up the volume of the system  
and the connected device.  
1 Download and install the app “NFC Easy  
Indications of Illumination lamp  
Connecton the smartphone.  
To end a call  
Status  
Illumination lamp  
Lights up (white)  
Lights up (white)  
Lights up (blue)  
“NFC Easy Connectis an original app by Sony for Android  
phones, and is available at Google Play Store.  
Search for “NFC Easy Connector scan the following two-  
dimensional code to download and install the free app.  
Communication fees are required to download the app.  
The app may not be downloadable in some country/  
regions.  
Press the  
(call) button. If you were listening to music when  
AUDIO IN mode  
Searching for a device  
In an extremely cold or hot environment, note the following  
points.  
the call arrived, it will be resumed when the call has finished.  
When operating by the AC adaptor, charging may complete  
too quickly, or may not be possible.  
After use  
Connecting to Bluetooth  
Do any of the following.  
device  
When operating on battery only, the system may stop after  
the BATTERY/CHARGE indicator flashes (green) three times.  
Set the Bluetooth function of the Bluetooth device off. For  
details, refer to the operating instructions supplied with the  
device.  
Flashes once (white)  
Pressing VOLUME−/+  
buttons  
Charge the battery at least twice a year.  
Tip  
Turn off the Bluetooth device.  
When the volume hits the  
maximum or minimum  
Flashes three times (white)  
For some smartphones, One touch connection may be  
To reset the system  
Press the RESET button on the rear of the system with a  
pointed object if the buttons on the system do not function.  
Turn off the system.  
HFP (Hands-free Profile): Talking on the phone/Operating  
the phone by hands-free.  
available without downloading the app “NFC Easy Connect.”  
In that case, the operation and specifications may be  
different from the description here. For details, refer to the  
operating instructions supplied with the smartphone.  
Touch the system with the smartphone again to disconnect  
(NFC compatible smartphones only).  
One touch connection (NFC) is  
not possible  
Tip  
Maximum communication range  
Use Bluetooth devices within 10 m (line of sight) of the system.  
Maximum communication range may shorten under the  
following conditions.  
There is an obstacle such as a person, metal, or wall  
between the system and Bluetooth device.  
A wireless LAN device is in use near the system.  
A microwave oven is in use near the system.  
A device that generates electromagnetic radiation is in  
use near the system.  
To turn the illumination on/off, hold down the  
BLUETOOTH-PAIRING button, then press and hold the /  
button.  
Unit button functions during a call  
Available functions may vary depending on the Bluetooth  
mobile phone, or the profiles supported by the Bluetooth  
mobile phone. Refer to the operating instructions supplied  
with the Bluetooth mobile phone.  
By the two-dimensional code:  
Use a two-dimensional code reader app.  
11) Only use attachments/accessories specified by the  
manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over.  
How to Make Wireless  
Connection with  
USB cable  
(not supplied)  
Indications of the Bluetooth function  
Keep the smartphone close to the  
If the smartphone is in a case,  
remove it.  
system until the smartphone  
vibrates. If you fail, move the  
smartphone slightly on the N  
marked part of the system.  
Note  
Status  
Bluetooth indicator (blue)  
Flashes quickly  
Flashes  
Status  
(call) button  
This function is not for data communication by USB cable.  
Bluetooth Devices  
Pairing with a device  
Searching for a device  
Connected to a device  
Bluetooth standby mode  
Standby  
Press once to start voice dial (voice dial  
compatible mobile phones only).  
Press for about 2 seconds to redial the phone  
number that is dialed last time.  
You can enjoy music and hands-free calling with the system  
wirelessly by using your device’s Bluetooth function.  
Choose one of the following three connection methods, best  
suited for the Bluetooth device. For details on how to operate  
your device, refer to the operating instructions supplied with  
the device.  
Lights up  
Interference from other devices  
Disposing of the System  
Flashes slowly  
Compatible smartphones  
Because Bluetooth devices and wireless LAN (IEEE802.11b/g)  
use the same frequency, microwave interference may occur  
and resulting in communication speed deterioration, noise, or  
invalid connection if the system is used near a wireless LAN  
device. In such a case, perform the following.  
Use the system at least 10 m away from the wireless LAN  
device.  
Outgoing  
call  
Check that the NFC function of the  
smartphone is set to on.  
NFC receiving sensitivity depends on  
the device. If you fail to connect with  
a smartphone by One touch several  
times, connect to the system by on-  
screen operation.  
Press once to cancel outgoing call.  
Press for about 2 seconds to change call  
device between the system and mobile  
phone.  
For environment protection, remove the built-in lithium-ion  
battery pack from the system.  
Smartphones with the NFC function built-in  
(OS: Android 2.3.3 or later, excluding Android 3.x)  
Before removing the battery, drain the battery by removing  
the AC adaptor and using the system only with the battery.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
Pairing with a Bluetooth device:  
About NFC  
Opening the Stand  
Pattern A  
see  
14) Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
Incoming  
call  
Press once to answer call.  
Press for about 2 seconds to reject call.  
NFC (Near Field Communication) is a technology enabling  
short-range wireless communication between various  
devices, such as mobile phones and IC tags. Thanks to the  
NFC function, data communication can be achieved easily  
just by touching the relevant symbol or designated  
location on NFC compatible devices.  
Take out the lithium-ion battery for recycling.  
Do not open the cabinet other than when disposing of  
the system.  
The system stands itself by opening the stand.  
Bluetooth devices need to be “pairedwith each other  
beforehand.  
If the system is used within 10 m of a wireless LAN device,  
turn off the wireless LAN device.  
During  
call  
Press once to finish call.  
Check that the “NFC Easy Connect”  
app is displayed on the  
smartphone.  
Press for about 2 seconds to change call  
device between the system and mobile  
phone.  
Connecting with a paired device:  
1 Turn off the system and remove the AC  
Pattern B  
Interference to other devices  
Microwaves emitting from a Bluetooth device may affect the  
operation of electronic medical devices. Turn off the system  
and other Bluetooth devices in the following locations, as it  
may cause an accident.  
where inflammable gas is present, in a hospital, train,  
airplane, or a gas station  
near automatic doors or a fire alarm  
see  
adaptor.  
To listen to music with a Bluetooth device that has been  
paired, see this pattern.  
2 Start the app “NFC Easy Connecton the  
smartphone.  
WARNING  
Battery may explode if mistreated. Do not recharge,  
disassemble or dispose of in fire.  
Dispose of used battery promptly, according to local  
environmental laws and guidelines in force. Keep away from  
children.  
2 Detach the cover of the rear of the system to  
Using Hands-free calling with another  
Bluetooth mobile phone while  
listening to music  
This system is compatible with Multipoint technology, which  
allows you to enjoy hands-free calling while listening to music  
from a Bluetooth-compatible music player.  
One touch connection with a smartphone (NFC):  
Make sure that the application screen is displayed.  
remove the battery pack.  
Pattern C  
see  
Open the stand.  
Remove the 4 rubber covers from the bottom of the  
system.  
3 Touch the system with the smartphone.  
To close the stand  
Using an NFC compatible smartphone, you can establish a  
Bluetooth connection by just touching the system with it.  
Keep touching the smartphone on the N marked part of  
the system until the smartphone vibrates.  
Close the stand to the opposite way of arrow.  
Remove the 4 screws.  
Remove the cover.  
Remove the connector plug from the system.  
Remove the battery.  
Notes  
Check the following before operating the system.  
Both the system and the device are placed within 1 m of  
each other.  
The system is connected to the AC adaptor, or the battery is  
sufficiently charged.  
The operating instructions supplied with the device are at  
hand.  
For the State of California, USA only  
Perchlorate Material - special handling may apply, See  
Smartphone vibrates  
(system recognized)  
To be able to use the Bluetooth function, the Bluetooth  
device to be connected requires the same profile as the  
system’s.  
Perchlorate Material : Lithium battery contains perchlorate.  
Note also that even if the same profile exists, devices may  
vary in function depending on their specifications.  
Due to the characteristic of Bluetooth wireless technology,  
the sound played on the system is slightly delayed from the  
sound played on the Bluetooth device during talking on the  
telephone or listening to the music.  
This system supports security capabilities that comply with  
the Bluetooth standard to provide a secure connection  
when the Bluetooth wireless technology is used, but  
security may not be enough depending on the setting. Be  
careful when communicating using Bluetooth wireless  
technology.  
We do not take any responsibility for the leakage of  
information during Bluetooth communication.  
A device featuring the Bluetooth function is required to  
conform to the Bluetooth standard specified by Bluetooth  
SIG, and be authenticated. Even if the connected device  
conforms to the above mentioned Bluetooth standard,  
some devices may not be connected or work correctly,  
depending on the features or specifications of the device.  
Noise or sound skips may occur depending on the Bluetooth  
device connected with the system, the communication  
environment or the usage environment.  
On Copyrights and Licenses  
The Bluetooth® word mark and logos are owned by the  
Bluetooth SIG, Inc. and any use of such marks by Sony  
Corporation is under license.  
Pattern A  
Pairing and connecting with a  
Bluetooth device  
The N Mark is a trademark or registered trademark of NFC  
Forum, Inc. in the United States and in other countries.  
Android is a trademark of Google Inc.  
iPhone is a trademark of Apple Inc., registered in the U.S. and  
other countries.  
Other trademarks and trade names are those of their  
respective owners.  
1 Turn on the system.  
Note  
The Bluetooth indicator (blue) flashes.  
If the AUDIO IN indicator (amber) lights up, press the  
BLUETOOTH-PAIRING button.  
Be careful not to damage the code cover with metallic tweezers,  
etc. when you remove the battery pack from the system.  
NOTE  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following  
measures:  
2 Set the Bluetooth function of the Bluetooth  
Lights up  
device to on.  
For details, refer to the operating instructions supplied  
with the device.  
One touch connection (NFC) cannot be used in this  
procedure.  
Operations may vary depending on the Bluetooth device.  
This type of Bluetooth connection may not be established  
depending on the combination of the Bluetooth devices.  
Refer also to the operating instructions supplied with your  
Bluetooth devices.  
3 Press and hold the BLUETOOTH-PAIRING  
button on the system until two beeps are  
heard.  
Follow the on-screen instructions to establish the  
connection.  
When the Bluetooth connection is established, the  
Bluetooth indicator (blue) stays on.  
The Bluetooth indicator (blue) begins to flash quickly and  
pairing mode is entered.  
 

Sharp Projector DT 100 User Manual
Shure Music Mixer FP32 User Manual
Silicon Image Computer Drive SSD DXXXI 4210 User Manual
Sony Computer Monitor PFM 42V1N User Manual
Sony Cordless Telephone SPP A9276 User Manual
Sony Laptop PCG 8491 User Manual
Sony MP3 Player D 303 User Manual
Sony Utility Vehicle DSC W510 User Manual
Star Manufacturing Refrigerator 16PD A User Manual
SUPER MICRO Computer Computer Hardware X8DTU 6F+ User Manual