Sony Stereo System CMT HX70BTR User Manual

3-294-004-12(1)  
Micro HI-FI  
Component  
System  
Operating Instructions  
CMT-HX70BTR  
CMT-HX50BTR  
© 2008 Sony Corporation  
 
purchased the product.  
Applicable accessories: Remote  
commander  
Note on DualDiscs  
A DualDisc is a two sided disc product  
which mates DVD recorded material on  
one side with digital audio material on  
the other side. However, since the audio  
material side does not conform to the  
Compact Disc (CD) standard, playback on  
this product is not guaranteed.  
Disposal of waste  
batteries (applicable  
in the European  
Union and other  
European countries  
with separate  
Music discs encoded with copyright  
protection technologies  
collection systems)  
is product is designed to playback  
discs that conform to the Compact Disc  
(CD) standard. Recently, various music  
discs encoded with copyright protection  
technologies are marketed by some  
record companies. Please be aware that  
among those discs, there are some that  
do not conform to the CD standard and  
may not be playable by this product.  
is symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not be  
treated as household waste. By ensuring  
these batteries are disposed of correctly,  
you will help prevent potentially negative  
consequences for the environment and  
human health which could otherwise be  
caused by inappropriate waste handling of  
the battery. e recycling of the materials  
will help to conserve natural resources.  
In case of products that for safety,  
performance or data integrity reasons  
require a permanent connection with an  
incorporated battery, this battery should  
be replaced by qualified service staff only.  
To ensure that the battery will be treated  
properly, hand over the product at end-of-  
life to the applicable collection point for  
the recycling of electrical and electronic  
equipment.  
e Bluetooth word mark and logos  
are owned by the Bluetooth SIG, Inc.  
and any use of such marks by Sony  
Corporation is under license. Other  
trademarks and trade names are those  
of their respective owners.  
WALKMAN” and “WALKMAN”  
logo are registered trademarks of Sony  
Corporation.  
MPEG Layer-3 audio coding  
technology and patents licensed from  
Fraunhofer IIS and omson.  
Windows Media is a registered  
trademark of Microsoſt Corporation  
in the United States and/or other  
countries.  
For all other batteries, please view the  
section on how to remove the battery from  
the product safely. Hand the battery over  
to the applicable collection point for the  
recycling of waste batteries.  
For more detailed information about  
recycling of this product or battery, please  
contact your local Civic Office, your  
household waste disposal service or the  
shop where you purchased the product.  
GB  
 
Table of Contents  
GB  
 
Guide to parts and controls  
is manual mainly explains operations using the remote, but the same operations can  
also be performed using the buttons on the unit having the same or similar names.  
Unit (HCD-HX70BTR, HCD-HX50BTR/Compact Disc Receiver)  
Front panel  
Top panel  
Continued  
GB  
 
 
Remote (RM-AMU009)  
BLUETOOTH indicator (page 19,  
20)  
Lights up when the Bluetooth function  
is active.  
BLUETOOTH button (page 17, 19,  
20)  
Press to make a connection,  
disconnection, or pairing with a  
Bluetooth device.  
Unit: VOLUME control (page 13,  
14, 17, 20, 24, 26)  
Remote: VOLUME +/button  
(page 13, 14, 17, 20, 24, 26, 31)  
Turn or press to adjust the volume.  
(USB) port (page 21, 24, 43)  
Connect to an optional USB device.  
(open/close) button (page 13)  
/(power) button (page 12, 31,  
36)  
Press to turn on the system.  
Press to open or close the disc tray.  
AUDIO IN jack (page 26)  
Connect to an optional audio  
component.  
STANDBY indicator (page 28, 32)  
Lights up when the system is turned off.  
PHONES jack  
Connect the headphones.  
Remote sensor (page 32)  
GB  
 
Playback buttons and function  
buttons  
Unit: BLUETOOTH  (play/  
pause) button (page 16, 17)  
Press to select the Bluetooth function.  
Press to start or pause playback of the  
music on the Bluetooth device (Bluetooth  
mobile phone, etc.).  
Unit: /CANCEL (stop/cancel)  
button (page 13, 14, 16, 17, 19,  
25)  
Remote: (stop) button (page  
13, 14, 16, 17, 19, 25)  
Press to stop playback.  
Press to cancel search.  
Unit: USB  (play/pause)  
SEARCH button (page 13, 25)  
Press to enter or exit search mode.  
button (page 24)  
Press to select the USB function.  
Press to start or pause playback of an  
optional USB device.  
Unit: ENTER button (page 13, 16,  
19, 21, 22, 25, 29)  
Unit: CD  (play/pause)  
Remote: (enter) button (page  
12, 13, 16, 19, 21, 22, 25, 29, 30,  
31)  
button (page 13)  
Press to select the CD function.  
Press to start or pause playback of a disc.  
Press to enter the settings.  
Remote: (play) button,  
(pause) button  
Press to start or pause playback.  
/(go back/go forward)  
button (page 13, 17, 23, 25, 29)  
Press to select a track or file.  
Unit: TUNER/BAND button (page  
14)  
Press to select the TUNER function.  
Press to select FM or AM reception  
mode.  
Unit: TUNE +/(tuning) button  
(page 14)  
Remote: +/(tuning) button  
(page 14, 30)  
Unit: FUNCTION button (page 13,  
14, 24, 26)  
Press to tune in the desired station.  
Remote: FUNCTION +/button  
+/(select folder) button  
(page 13, 17, 23, 25, 29)  
Press to select a folder.  
(page 13, 14, 24, 26)  
Press to select the function.  
/(rewind/fast forward)  
button (page 13, 16, 17, 25)  
Press to find a point in a track or file.  
Continued  
GB  
 
CD-USB SYNC/REC1 button (page  
21, 22)  
Press to record from a disc onto the  
connected optional USB device.  
RETURN button  
Press to return to the previous menu  
when using the DIGITAL MEDIA PORT  
adapter.  
///button (page 12, 31)  
USB MENU button (page 22, 23)  
Press to select the menu items.  
Press to erase audio files and folders from  
the connected optional USB device.  
Press to select which memory to read  
to if the USB device has more than one  
memory.  
TUNER MEMORY button (page  
30)  
Press to preset the radio station.  
Sound buttons (page 27)  
Unit: DSGX button  
PLAY MODE/TUNING MODE  
button (page 13, 14, 21, 25, 29,  
30)  
Remote: EQ button  
Press to select the sound effect.  
Press to select the play mode of a CD,  
MP3 disc or an optional USB device.  
Press to select the tuning mode.  
CLEAR button (page 17, 19, 29)  
Press to delete a pre-programmed track  
or file.  
Press to erase the pairing registration  
information of the Bluetooth device.  
REPEAT/FM MODE button (page  
13, 14, 25)  
Press to listen to a disc, a single track or  
file repeatedly.  
Press to select the FM reception mode  
(monaural or stereo).  
TIMER MENU button (page 12,  
31)  
Press to set the clock and the Play Timer.  
SLEEP button (page 31)  
Press to set the Sleep Timer.  
TOOL MENU button  
Press to select a menu when using the  
DIGITAL MEDIA PORT adapter.  
DISPLAY button (page 17, 28)  
Press to change the information on the  
display.  
Battery compartment lid  
(page 12)  
GB  
 
Information on the display  
Play/Pause  
Audio format  
BLUETOOTH  
Lights up when the Bluetooth function  
is selected.  
Play mode (page 13, 25)  
DSGX (page 27)  
Tuner reception mode (page 14)  
Tuner reception (page 14)  
Timer (page 31)  
CD-USB Recording (page 21)  
USB MEMORY  
Lights up when an optional USB device  
is connected.  
Text information  
GB  
 
 
Getting Started  
Hooking up the system securely  
A CMT-HX50BTR is used for illustration purposes.  
or  
Wall socket  
Right speaker  
Left speaker  
FM lead antenna (Extend it horizontally.)  
White side for North American model  
Brown side for other models  
AM loop antenna  
10GB  
 
 
Notes  
Speakers  
Available DIGITAL MEDIA PORT adapters  
Connect the speaker cords to the  
SPEAKER jacks.  
vary in each area.  
Do not connect an adaptor other than the  
DIGITAL MEDIA PORT adapter.  
Do not connect or disconnect the DIGITAL  
MEDIA PORT adapter to/from the  
DMPORT while the system is on.  
For CMT-HX70BTR, connect the other  
end of the speaker cords to the terminals  
on the speakers as shown below.  
When using a DIGITAL MEDIA PORT  
adapter that has video output function,  
connect the adaptor directly to the TV.  
Insert only the stripped portion and  
then turn the nut clockwise.  
When carrying this system  
1
Remove a disc to protect the CD  
mechanism.  
Black  
()  
Red  
()  
2
Press FUNCTION +/(or FUNCTION  
Red  
()  
on the unit)  
repeatedly to select  
the CD function.  
3
4
Hold down SEARCH  
and press   
“STANDBYappears.  
on the unit,  
on the unit until  
Power  
After “LOCKappears, unplug the  
power cord.  
For models with a voltage selector, set  
VOLTAGE SELECTOR to the local  
power line voltage.  
Connect the power cord to a wall socket.  
If the plug does not fit the wall socket,  
detach the supplied plug adaptor (only  
for models equipped with an adaptor).  
Speaker pads  
Attach the supplied speaker pads to  
the bottom of the speakers to prevent  
slipping.  
Antennas  
Find a location and an orientation that  
provide good reception, and then set up  
the antenna.  
Keep the antennas away from the speaker  
cords, the power cord and the USB cable  
to avoid picking up noise.  
DMPORT (DIGITAL MEDIA PORT)  
Connect the DIGITAL MEDIA PORT  
adapter. You need to connect the  
DIGITAL MEDIA PORT adapter to an  
optional audio device (portable audio  
player, etc.).  
Continued  
11GB  
 
To use the remote  
Slide and remove the battery  
Setting the clock  
compartment lid , and insert the two  
supplied R6 (size AA) batteries, side  
first, matching the polarities shown  
below.  
Use buttons on the remote to set the  
clock.  
1
2
Press /  
system.  
to turn on the  
.
Press TIMER MENU  
e hour indication flashes in the  
display.  
If “PLAY SET?” flashes in the display,  
press /  
repeatedly to select  
Notes  
“CLOCK SET?” and then press  
.
With normal use, the batteries should last for  
about six months.  
Do not mix an old battery with a new one or  
mix different types of batteries.  
If you do not use the remote for a long period  
of time, remove the batteries to avoid damage  
from battery leakage and corrosion.  
repeatedly to set  
the hour, and then press  
3
4
Press /  
.
Use the same procedure to set  
the minutes.  
e clock settings are lost when you  
disconnect the power cord or if a  
power failure occurs.  
To display the clock when the system  
is off  
Press DISPLAY . e clock is displayed  
for about 8 seconds.  
1ꢀGB  
 
 
Other operations  
Basic Operations  
To  
Press  
Pause playback (or CD  on the  
unit) . To resume  
Playing a CD/MP3 disc  
play, press the button  
again.  
1
Select the CD function.  
.
Stop playback  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
Select a folder  
on an MP3  
disc  
Select a track /  
or file  
+/  
.
2
Place a disc.  
.
Press   
on the unit, and place  
a disc with the label side up on the  
disc tray.  
Select a folder SEARCH  
on the  
and file on  
unit. Press /  
an MP3 disc  
to select the desired  
while viewing folder, then press (or  
the folder and ENTER on the unit)  
.
file names on Press /  
the display to select the desired  
file, then press (or  
.
ENTER on the unit)  
Find a point in Hold down /  
a track or file  
during playback, and  
To close the disc tray, press   
on  
release the button at the  
desired point.  
the unit again.  
Do not force the disc tray closed with  
your finger, as this may damage the  
unit.  
Select Repeat REPEAT  
repeatedly  
Play  
until “REP” or “REP1”  
appears.  
3
4
Start playback.  
Press (or CD  on the unit)  
To change the play mode  
.
Press PLAY MODE  
repeatedly while  
the player is stopped. You can select  
normal play (“ *” for all MP3 files  
in the folder on the disc), shuffle play  
Adjust the volume.  
Press VOLUME +/(or turn the  
.
VOLUME control on the unit)  
(“SHUF” or “  
play (“PGM”).  
(SHUF)  
Play performs the same operation as normal  
(shuffle) play.  
SHUF*”), or program  
*
When playing a CD-DA disc,  
Continued  
1ꢁGB  
 
 
Notes on Repeat Play  
All tracks or files on a disc are played  
Listening to the radio  
repeatedly up to five times.  
“REP1” indicates that a single track or file is  
repeated until you stop it.  
1
Select “TUNER FMor “TUNER  
AM.”  
Notes on playing MPꢁ discs  
Do not save other types of files or  
unnecessary folders on a disc that has MP3  
files.  
Press FUNCTION +/(or TUNER/  
BAND on the unit)  
repeatedly.  
Folders that have no MP3 files are skipped.  
MP3 files are played back in the order that  
they are recorded onto the disc.  
e system can only play MP3 files that have  
a file extension of .MP3.  
If there are files on the disc that have the  
.MP3” file extension, but that are not MP3  
files, the unit may produce noise or may  
malfunction.  
e maximum number of:  
folders is 255 (including the root folder).  
MP3 files is 511.  
2
3
Select the tuning mode.  
Press TUNING MODE  
until AUTO” appears.  
repeatedly  
Tune in the desired station.  
Press +/(or TUNE +/on  
the unit) . Scanning stops  
automatically when a station is tuned  
in, and then “TUNED” and “ST” (for  
stereo programs only) appear.  
MP3 files and folders that can be  
contained on a single disc is 512.  
folder levels (the tree structure of files) is  
8.  
When you tune in a station that  
provides RDS services, the station  
name appears on the display  
(European model only).  
Compatibility with all MP3 encoding/writing  
soſtware, recording device, and recording  
media cannot be guaranteed. Incompatible  
MP3 discs may produce noise or interrupted  
audio or may not play at all.  
4
Adjust the volume.  
Press VOLUME +/(or turn the  
Notes on playing multisession discs  
.
VOLUME control on the unit)  
If the disc begins with a CD-DA (or MP3)  
session, it is recognized as a CD-DA (or  
MP3) disc, and other sessions are not played  
back.  
A disc with a mixed CD format is recognized  
as a CD-DA (audio) disc.  
To stop automatic scanning  
.
Press   
To tune in a station with a weak signal  
If “TUNED” does not appear and the  
scanning does not stop, press TUNING  
MODE  
repeatedly until AUTO” and  
“PRESET” disappear, and then press  
+/(or TUNE +/on the unit)  
repeatedly to tune in the desired station.  
To reduce static noise on a weak FM  
stereo station  
Press FM MODE  
repeatedly until  
“MONO” appears to turn off stereo  
reception.  
1ꢆGB  
 
 
Listening to music of a  
Bluetooth mobile phone or  
Bluetooth device  
Using the Bluetooth  
function  
is system supports Bluetooth A2DP  
and AVRCP profiles. For details on  
Bluetooth wireless technology, see  
“Bluetooth wireless technology” (page  
42).  
You can listen to music from your  
Bluetooth mobile phone or Bluetooth  
device over a wireless connection.  
Check the websites below for the latest  
information about compatible devices.  
For customers in the U.S.A.:  
<http://www.sony.com/shelfsupport>  
For customers in Canada:  
ElectronicsSupport/>  
ElectronicsSupport/>  
For customers in Europe:  
<http://support.sony-europe.com/>  
For customers in Latin America:  
<http://www.sony-latin.com/index.crp>  
For customers in Asia and Oceania:  
<http://www.sony-asia.com/support>  
Follow the procedure below to listen to  
music from Bluetooth devices with this  
system.  
Pairing this system with a Bluetooth  
device  
Connecting to registered devices  
Playing music of a Bluetooth device  
For details about the operations of  
the Bluetooth device, also refer to the  
operation manual supplied with your  
Bluetooth device.  
Continued  
1ꢂGB  
 
 
Pairing this system with a Bluetooth  
device  
4
Enter the passkey.  
Passkey entry may be required  
depending on the type of Bluetooth  
device.  
Pairing is an operation where Bluetooth  
devices register with each other  
beforehand. Use the procedure below  
to pair the system with your Bluetooth  
device. Once a pairing operation is  
performed, it does not need to be  
performed again. If pairing is already  
completed, proceed to “Playing music of  
a Bluetooth device” (page 17).  
When “PIN?” and a countdown  
appear, enter the passkey at the  
system as follows:  
Press /and /  
1
Place the Bluetooth device to be  
connected to this system within  
1 meter of the system.  
on the remote (or  
+/and  
/  on the unit)  
to enter the same passkey that was  
entered at the Bluetooth device, and  
then press (or ENTER on the unit)  
2
3
Select the Bluetooth function.  
.
Press BLUETOOTH   
the unit.  
on  
Once pairing is completed and the  
connection is established, the system  
display changes as follows:  
Operate the Bluetooth device  
and perform the pairing  
operation.  
“Connect”  
device  
Name of the Bluetooth  
For details about the operations of  
the Bluetooth device, refer to the  
operation manual supplied with your  
Bluetooth device.  
To cancel passkey entry partway  
.
Press   
If passkey entry still required, turn off the  
Bluetooth device.  
When searching for this system with  
the Bluetooth device, a list of the  
devices found may appear in the  
Bluetooth device display depending  
on the type of Bluetooth device.  
is system appears as “CMT-  
HX70BTR” or “CMT-HX50BTR”  
depending on the model.  
When establishing a connection with  
this system, select the audio profile  
(A2DP, AVRCP) at the Bluetooth  
device. If the Bluetooth device does  
not support the AVRCP profile, you  
cannot perform playback or other  
operations with the system (page 17).  
Notes  
“Passkey” may be called “Passcode,” “PIN  
code,” “PIN number” or “Password,” etc.  
depending on the device.  
is system only supports numerical  
passkeys up to 4 digits.  
e pairing standby status of the system is  
cancelled aſter about 30 seconds.  
If pairing is not successful, redo the  
procedure from step 1.  
While connected to a Bluetooth device, this  
system cannot be detected and a connection  
cannot be established from another  
Bluetooth device.  
1ꢃGB  
 
To erase all the pairing registration  
information  
3
4
Start playback.  
Press (or BLUETOOTH  on  
.
the unit)  
on the  
1
Press BLUETOOTH   
unit.  
Depending on the Bluetooth device,  
you may need to start up the AV  
soſtware of the Bluetooth device  
beforehand.  
When the system is connected with a  
Bluetooth device (when the Bluetooth  
device name or other information  
appears in the system display), press  
Adjust the volume.  
Press VOLUME +/(or turn the  
VOLUME control on the unit)  
and hold BLUETOOTH  
on the  
unit for about 2 seconds to put the  
system in Bluetooth standby mode.  
.
2
3
Press CLEAR  
.
To check the address of a connected  
Bluetooth device  
“Delete?” appears.  
Press DISPLAY  
while the Bluetooth  
.
Press (or ENTER on the unit)  
“Complete!” appears and all the  
pairing information is erased.  
device name appears in the system  
display.  
e Bluetooth device address appears for  
8 seconds.  
Note  
In order to connect with a Bluetooth device  
aſter performing this operation, you must enter  
the passkey again.  
To cancel the connection with a  
Bluetooth device  
Press and hold BLUETOOTH  
Playing music of a Bluetooth device  
on the unit for about 2 seconds until  
“Disconnect” appears, or until the  
information on the display (device name,  
etc.) disappears.  
You can operate a Bluetooth device by  
connecting the system and a Bluetooth  
device using AVRCP.  
1
2
Select the Bluetooth function.  
Other operations  
Press BLUETOOTH   
the unit.  
on  
To  
Press  
Pause playback (or BLUETOOTH  
Establish a connection from the  
Bluetooth device.  
For details about the operations of  
the Bluetooth device, refer to the  
operation manual supplied with your  
Bluetooth device.  
.
 on the unit)  
Stop playback  
Select a folder  
.
+/  
/  
.
Select a file  
.
Find a point in Hold down /  
a file  
.
Once the connection is established,  
the system display changes as follows:  
“Connect”  
device  
Name of the Bluetooth  
Note  
ese operations may not be available for  
certain Bluetooth devices. In addition, the  
actual operations may differ depending on the  
connected Bluetooth device.  
Continued  
1ꢄGB  
 
Notes on connections with Bluetooth  
devices  
If you cannot connect with a paired  
Bluetooth device, perform the pairing  
operation between the system and the  
Bluetooth device again.  
Listening to music on this  
system using Bluetooth  
headphones  
You can listen to music played on this  
system using your Bluetooth headphones  
over a wireless connection.  
Depending on the type of Bluetooth device,  
you can adjust the volume using the controls  
of the Bluetooth device.  
When BLUETOOTH   
on the unit  
is pressed while connected to Bluetooth  
headphones, it may take some time until  
a connection is made to the system from  
another Bluetooth device.  
Use the A2DP-capable or A2DP- and  
AVRCP-capable Bluetooth device with the  
system in a peer-to-peer environment.  
Tip  
Bluetooth devices that have been connected  
with this system in the past are registered with  
this system.  
When a Bluetooth connection is not  
currently established, you can easily  
connect the system to a Bluetooth device  
by pressing BLUETOOTH   
on the  
unit. (Connection is attempted with up to  
3 devices in order from the most recently  
connected device, and the attempts end when  
a connection is established.) is function may  
not be available depending on the Bluetooth  
device you are using.  
Follow the procedure below to listen  
to music on this system with Bluetooth  
headphones.  
Pairing this system with Bluetooth  
If a connection cannot be made, the system  
returns to the standby mode.  
headphones  
Connecting to registered headphones  
Playing music on this system  
For details about the operations of the  
Bluetooth headphones, also refer to the  
operation manual supplied with your  
Bluetooth headphones.  
1ꢇGB  
 
Pairing this system with Bluetooth  
headphones  
To cancel passkey entry partway  
.
Press   
Pairing is an operation where Bluetooth  
devices register with each other  
Notes  
“Passkey” may be called “Passcode,” “PIN  
code,” “PIN number” or “Password,” etc.  
depending on the device.  
is system only supports numerical  
passkeys up to 4 digits.  
e pairing standby status of the system is  
cancelled aſter about 30 seconds.  
If pairing is not successful, redo the  
procedure from step 1.  
While connected to a Bluetooth device, this  
system cannot be detected and a connection  
cannot be established from another  
Bluetooth device.  
Pairing may not be possible if other  
Bluetooth devices are present around the  
system. In this case, turn off the other  
Bluetooth devices.  
beforehand. Use the procedure below  
to pair the system with your Bluetooth  
headphones. Once a pairing operation  
is performed, it does not need to be  
performed again. If pairing is already  
completed, proceed to “Playing music on  
this system” (page 20).  
1
Select a function other than the  
Bluetooth function.  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
2
3
Place the Bluetooth  
headphones to be connected  
to this system within 1 meter of  
the system.  
To erase all the pairing registration  
information  
on the  
1
Press BLUETOOTH   
unit.  
Put the Bluetooth headphones  
in pairing mode.  
When the system is connected with a  
Bluetooth device (when the Bluetooth  
device name or other information  
appears in the system display), press  
For details about the operations of the  
Bluetooth headphones, refer to the  
operation manual supplied with your  
Bluetooth headphones.  
and hold BLUETOOTH  
on the  
unit for about 2 seconds to put the  
system in Bluetooth standby mode.  
4
5
Press and hold BLUETOOTH  
on the unit for about 7 seconds  
until the BLUETOOTH indicator  
.
2
3
Press CLEAR  
“Delete?” appears.  
flashes.  
.
Press (or ENTER on the unit)  
“Complete!” appears and all the  
pairing information is erased.  
Sound output from the speakers is  
stopped.  
Enter the passkey.  
Note  
Follow the same procedure as in  
step 4 of “Pairing this system with a  
Bluetooth device” (page 16).  
To connect with Bluetooth headphones aſter  
performing this operation, you must enter the  
passkey again.  
Once pairing is completed and the  
connection is established, the system  
display changes as follows:  
“Connect”  
device  
Name of the Bluetooth  
Continued  
1ꢅGB  
 
Playing music on this system  
4
Adjust the volume.  
Press VOLUME +/(or turn the  
VOLUME control on the unit)  
You can operate this system from  
Bluetooth headphones by connecting the  
system and Bluetooth headphones using  
AVRCP.  
.
To cancel the connection with  
Bluetooth headphones  
1
Select a function other than the  
Bluetooth function.  
Press and hold BLUETOOTH  
on  
the unit for about 2 seconds until the  
Press FUNCTION +/(or  
BLUETOOTH indicator  
turns off.  
FUNCTION on the unit)  
repeatedly.  
Sound is output from the speakers.  
Notes  
2
Establish a connection with the  
Bluetooth headphones.  
If you cannot connect with paired Bluetooth  
headphones, perform the pairing operation  
between the system and the Bluetooth  
headphones again.  
Press and hold BLUETOOTH  
on  
the unit for about 2 seconds until the  
When the system is changed to a function  
BLUETOOTH indicator  
then release the button.  
lights up,  
other than the Bluetooth function and  
BLUETOOTH  
on the unit is pressed  
Sound output from the speakers is  
stopped.  
while connected to a Bluetooth device, it may  
take some time until a connection is made  
with the Bluetooth headphones.  
If more than one Bluetooth device  
that has been connected in the past  
is present around the system, the  
system attempts to connect with up  
to 3 most recently connected devices.  
(Connection is attempted with up  
to 3 devices in order from the most  
recently connected device, and the  
attempts end when a connection is  
established.)  
is system stores separate volume settings  
for when listening through the speakers  
or PHONES jack  
on the unit, or when  
listening through Bluetooth headphones.  
Use the A2DP-capable or A2DP- and  
AVRCP-capable Bluetooth device with the  
system in a peer-to-peer environment.  
Once the connection is established,  
the system display changes as follows:  
“Connect” Name of the Bluetooth  
device  
3
Start playback of the music for  
the function selected in step 1.  
Depending on the type of Bluetooth  
headphones, you can operate this  
system (playback, volume control,  
etc.) using the headphone’s controls.  
For details about the operations of the  
Bluetooth headphones, refer to the  
operation manual supplied with your  
Bluetooth headphones.  
ꢀ0GB  
 
When USB cable connection is  
necessary, connect the USB cable  
supplied with the USB device to be  
connected.  
See the operation manual supplied  
with the USB device to be connected  
for details on the operation method.  
Recording from a disc  
onto an USB device  
You can connect an optional USB device  
to the  
(USB) port  
on the unit and  
record music from a disc to the USB  
device.  
2
3
Select the CD function, then  
load the disc you want to  
record.  
You can record from a CD-DA disc or  
MP3 disc only.  
e audio format of files recorded by this  
system is MP3.  
e approximate size of the recording is  
about 1 MB per minute of recording time  
from a CD. e size may be larger when  
recording from an MP3 disc.  
See “USB devices” (page 43) for a list of  
USB devices that can be connected to this  
system.  
Press PLAY MODE  
repeatedly  
to select the play mode when  
the CD player is stopped.  
e play mode automatically changes  
to normal play mode, if you start  
recording in shuffle play mode, repeat  
play mode or in program play mode  
(when no tracks or MP3 files are  
programmed).  
For details about the play mode, see  
To change the play mode” (page 13).  
Synchro Recording  
on  
4
5
Press CD-USB SYNC/REC1  
the unit.  
You can easily record an entire disc onto  
an USB device.  
“REC” flashes, and the display cycles  
through “SYNC REC,” “xxxMB Free”  
(remaining space on the USB device)  
and “Push ENTER.”  
e USB device stands by for  
recording and the CD player pauses  
for play.  
1
Connect a recordable USB  
device to the (USB) port  
as shown below.  
Press (or ENTER on the unit)  
.
Recording starts. When the recording  
is completed, the CD player and the  
USB device stop automatically.  
USB device  
Continued  
ꢀ1GB  
 
 
To select the recording destination on  
the USB device  
Recording a single track or MP3  
file during playback (REC1)  
If the USB device has more than one  
memory (for example, internal memory  
and a memory card), you can select  
which memory to read to and then start  
recording.  
You can easily record the track or MP3  
file that is currently being played back  
onto an USB device.  
1
Connect the USB device to the  
1
2
Connect a recordable USB  
device to the (USB) port  
(USB) port  
.
.
2
Select the USB function.  
Select the CD function, then  
load the disc you want to  
record.  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
on the unit in  
3
Press USB MENU  
stop mode.  
3
4
Select the track or MP3 file you  
want to record, then start play.  
“Select?” appears. If an audio file or  
a folder is selected, “Erase?” appears  
Press CD-USB SYNC/REC1  
on  
instead. Press /  
repeatedly  
to select “Select?.”  
the unit while the selected track  
or MP3 file is being played back.  
“REC” flashes, and the display cycles  
through “REC 1,” “xxxMB Free”  
(remaining space on the USB device)  
and “Push ENTER.”  
e USB device stands by for  
recording and the CD player pauses  
for play.  
.
4
5
Press (or ENTER on the unit)  
e name of a memory appears.  
e displayed name varies depending  
on the specifications of the USB  
device.  
Press /  
repeatedly to  
select the memory.  
Proceed to step 6 if only one memory  
can be selected.  
5
Press (or ENTER on the unit)  
To cancel this operation, press   
.
.
Recording starts. When the recording  
is completed, the CD player continues  
to play.  
.
6
7
Press (or ENTER on the unit)  
Start recording by following steps 2  
thorough 5 of “Synchro Recordingor  
“Recording a single track or MP3 file  
during playback (REC1).”  
To stop recording  
.
Press   
ꢀꢀGB  
 
To remove the USB device  
Folder and file generation rules  
When first recording to an USB device,  
a “MUSIC” folder is created directly  
below the “ROOT.” Folders and files are  
generated within this “MUSIC” folder  
as follows according to the recording  
method.  
1
Select the USB function.  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
on the unit in stop  
mode until “No Device“ appears.  
2
3
Hold down   
Synchro Recording1)  
Recording Folder name File name  
source  
Remove the USB device.  
MP3  
Same as the recording source2)  
“CDDA001”3) “TRACK001”4)  
To erase audio files or folders from the  
USB device  
CD-DA  
You can erase audio files or folders from  
the USB device.  
REC1 recording  
Recording Folder name File name  
source  
1
Connect a recordable USB device to  
.
MP3  
Same as the  
recording  
source2)  
the  
(USB) port  
“REC1”5)  
2
Select the USB function.  
“TRACK001”4)  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
CD-DA  
1)  
In Program Play mode, the folder name is  
“PGM_xxx,” and the file name depends on  
the recording source (CD-DA disc or MP3  
disc).  
3
Press /  
or  
+/  
repeatedly to select the audio file or  
folder you want to erase.  
2)  
3)  
Up to 32 characters of the name are assigned.  
Folder numbers are assigned serially  
thereaſter up to the maximum 999 (including  
the “ROOT” and “MUSIC” folders).  
File numbers are assigned serially thereaſter.  
A new file is recorded in the “REC1” folder  
each time REC1 recording is performed.  
on the unit.  
4
5
Press USB MENU  
“Erase?” appears.  
4)  
5)  
Press (or ENTER on the unit)  
.
Track Erase?” or “Folder Erase?”  
appears in the display.  
To cancel the erase operation, press  
.
.
6
Press (or ENTER on the unit)  
e selected audio file or folder is  
erased.  
Continued  
ꢀꢁGB  
 
Notes  
Do not remove the USB device during  
recording or erase operations. Doing so  
may corrupt the data on the USB device or  
damage the USB device itself.  
Do not connect the system and the USB  
device through an USB hub.  
When recording from a CD, the tracks  
are recorded as 128 kbps MP3 files. When  
recording from an MP3 disc, MP3 files  
are recorded with the same bit rate as the  
original MP3 files.  
While recording from an MP3 disc, no sound  
is output and “High Speed” appears.  
Listening to music of  
an USB device  
You can listen to music stored in the USB  
device.  
e audio formats that can be played  
back by this system are as follows:  
MP3*/WMA*/AAC*  
See “USB devices” (page 43) for a list of  
USB devices that can be connected to this  
system.  
* Files with copyright protection (Digital  
Rights Management) cannot be played by  
this system.  
Files downloaded from an online music store  
may not be played by this system.  
CD text information is not recorded in the  
created MP3 files.  
If you cancel the recording partway, an  
MP3 file is created up to the point when the  
recording was stopped.  
Recording stops automatically if:  
the USB device runs out of space during  
1
2
Select the USB function.  
recording.  
Press FUNCTION +/(or  
the number of audio files on the USB  
device reaches the limit for the number  
that the system can recognize.  
e maximum number of audio files and  
folders that can be contained on a single USB  
device is 999 (including the “ROOT” and  
“MUSIC” folders).  
e maximum number of audio files and  
folders may vary depending on the audio file  
and folder structure.  
FUNCTION on the unit)  
repeatedly.  
Connect an optional USB device  
.
to the (USB) port  
When the USB device is connected,  
the display changes as follows:  
“Reading”  
“Storage Drive*”  
* When connecting USB storage media,  
the volume label is displayed next if  
recorded.  
You cannot erase audio files and folders in  
shuffle play mode or program play mode.  
If the folder to be erased contains non-MP3/  
WMA/AAC format files or sub folders, these  
are not erased.  
If a folder or file that you are trying to record  
already exists on the USB device with the  
same name, a sequential number is added  
aſter the name without overwriting the  
original folder or file.  
Note  
It may take about 10 seconds before  
“Reading” appears depending on the type  
of USB device connected.  
3
4
Start playback.  
Press (or USB  on the unit)  
.
Adjust the volume.  
Press VOLUME +/(or turn the  
VOLUME control on the unit)  
.
ꢀꢆGB  
 
 
Other operations  
To change the play mode  
Press PLAY MODE  
repeatedly while  
To  
Press  
the USB device is stopped. You can select  
normal play (“ ” for all files in the  
folder on the USB device), shuffle play  
Pause playback (or USB  on  
the unit) . To resume  
(“SHUF” or “  
play (“PGM”).  
SHUF”), or program  
play, press the button  
again.  
Stop playback  
. To resume  
Notes on the USB device  
play, press (or  
You cannot change the play mode during  
USB  on the unit)  
playback.  
1)  
play, press   
. To cancel resume  
Some time may be needed to start playback  
when:  
again.  
Select a folder  
Select a file  
the folder structure is complex.  
the memory capacity is excessive.  
When the USB device is inserted, the system  
reads all the files on the USB device. If there  
are many folders or files on the USB device,  
it may take a long time to finish reading the  
USB device.  
+/  
.
/  
.
Select a folder SEARCH  
on the  
and file while unit. Press /  
viewing the  
to select the desired  
folder and file folder, then press (or  
names on the ENTER on the unit)  
Do not connect the system and the USB  
device through an USB hub.  
system display2)  
. Press /  
With some connected USB devices, aſter an  
operation is performed, there may be a delay  
before it is performed by this system.  
is system does not necessarily support all  
the functions provided in a connected USB  
device.  
to select the desired  
file, then press (or  
ENTER on the unit)  
.
Find a point in Hold down /  
a file  
during playback,  
and release the button  
at the desired point.  
e playback order for the system may differ  
from the playback order of the connected  
USB device.  
Always hold down   
on the unit and  
Select Repeat REPEAT  
Play  
repeatedly  
make sure that “No Device” appears before  
removing the USB device. Removing the USB  
device while “No Device” is not displayed  
may corrupt the data on it or damage the  
USB device itself.  
until “REP” or “REP1”  
appears.  
Hold down   
the unit until “No  
Device” appears, then  
remove the USB device.  
Remove the  
USB device  
on  
Do not save other types of files or unnecessary  
folders on an USB device that has audio files.  
Folders that have no audio files are skipped.  
1)  
When playing a VBR MP3/WMA file,  
the system may resume playback from a  
different point.  
You can search by different information such  
as album or genre for digital music players.  
e maximum number of audio files and  
folders that can be contained on a single USB  
device is 999 (including the “ROOT” and  
“MUSIC” folders).  
e maximum number of audio files and  
folders may vary depending on the file and  
folder structure.  
2)  
Continued  
ꢀꢂGB  
 
e audio formats that you can listen to with  
this system are as follows:  
MP3: file extension .mp3”  
Windows Media Audio file: file extension  
.wma”  
Using optional audio  
components  
AAC: file extension .m4a”  
1
Connect additional audio  
component to the AUDIO  
Note that even when file names have the  
above file extensions, if the actual file differs,  
the system may produce noise or may  
malfunction.  
Compatibility with all encoding/writing  
soſtwares, recording devices, and recording  
media cannot be guaranteed. Incompatible  
USB device may produce noise or interrupted  
audio or may not play at all.  
IN jack  
on the unit using  
an audio analog cord (not  
supplied).  
2
3
Turn down the volume.  
Press VOLUME (or turn the  
VOLUME control on the unit)  
.
Select the AUDIO IN function.  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly.  
4
5
Start playing the connected  
component.  
Adjust the volume.  
Press VOLUME +/(or turn the  
VOLUME control on the unit)  
.
ꢀꢃGB  
 
 
Using the DIGITAL  
Adjusting the sound  
To add a sound effect  
MEDIA PORT adapter  
To  
Press  
1
Press FUNCTION +/(or  
FUNCTION on the unit)   
repeatedly to select “DMPORT.”  
Generate a  
more dynamic  
sound  
DSGX  
on the unit.  
(Dynamic  
Sound  
2
Start playing the connected  
component.  
Generator  
X-tra)  
e sound from the connected  
component is played on the system.  
For operation details, see the  
operating instructions of the  
Set the sound EQ  
effect  
repeatedly  
to select “BASS”  
or “TREBLE,” and  
DIGITAL MEDIA PORT adapter.  
then press +/  
repeatedly to adjust the  
Note  
level.  
Depending on the type of DIGITAL MEDIA  
PORT adapter, you may be able to operate the  
connected component using either the buttons  
on the remote or the unit.  
Tip  
You can use the system as a battery charger for  
the audio device connected to the DIGITAL  
MEDIA PORT adapter while the system is on.  
27GB  
 
 
e following are displayed:  
ID3 tag information for MP3 files when  
ID3 version 1 and version 2 tags are used  
(up to 62 characters for an MP3 disc).  
e Russian model can display  
information in Russian characters, but the  
characters may not be displayed correctly  
for discs created with some encoding/  
writing soſtware and some recording  
device.  
e display information may not be updated  
or displayed properly depending on the  
Bluetooth device you are using.  
e display information may differ  
depending on the connected Bluetooth  
device.  
Changing the display  
To  
Press  
Change  
DISPLAY  
repeatedly  
information on when the system is on.  
the display1)2)  
Check the  
DISPLAY  
when  
clock when the the system is off3). e  
system is off  
clock is displayed for 8  
seconds.  
1)  
For example, you can view CD/MP3 disc  
information or the USB device information,  
such as;  
e display information for the Bluetooth  
device may not be updated properly  
depending on the communication  
track or file number during normal play.  
track or file name (“ ”) during normal  
play.  
environment or surrounding conditions.  
artist name (“ ”) during normal play.  
album or folder name (“  
normal play.  
”) during  
total playing time while the player is  
stopped.  
2)  
When the system and a Bluetooth device are  
connected using the Bluetooth function, you  
can view the Bluetooth device address.  
If the connected Bluetooth device supports  
metadata transfer, you can also view the  
Bluetooth device information during  
playback, such as the elapsed playing time,  
track title, artist name, album name, etc.  
3)  
e STANDBY indicator  
on the unit  
lights up when the system is off.  
Notes on the display information  
Characters that cannot be displayed appear  
as “_.  
e following are not displayed:  
total playing time for a CD-DA disc  
depending on the play mode.  
total playing time and remaining playing  
time for an MP3 disc and USB device.  
e following are not displayed correctly:  
folder and file names that do not follow  
either the ISO9660 Level 1, Level 2 or  
Joliet in the expansion format.  
ꢀꢇGB  
 
 
4
Press (or ENTER on the unit)  
to add the track or file to the  
program.  
Other Operations  
Creating your own  
CD  
 . ” appears when the total  
program time exceeds 100 minutes  
for a CD, or when you select a CD  
track whose number is 21 or over, or  
when you select an MP3 file.  
program  
(Program Play)  
1
Select the desired function.  
CD  
USB  
Press FUNCTION +/(or  
e total program time cannot be  
displayed, so “ . ” appears.  
FUNCTION on the unit)  
repeatedly to select the CD function.  
5
6
Repeat steps 3 through 4 to  
program additional tracks or  
files, up to a total of 25 tracks or  
files.  
USB  
Press FUNCTION +/(or  
FUNCTION on the unit)  
repeatedly to select the USB function.  
repeatedly  
2
3
Press PLAY MODE  
until “PGMappears while the  
system is stopped.  
To play your program of tracks  
.
or files, press   
e program remains available until  
you open the disc tray or remove  
the USB device. To play the same  
Press /  
until the desired track or file  
number appears.  
repeatedly  
.
program again, press   
To cancel Program Play  
When programming files, press  
Press PLAY MODE  
repeatedly until  
+/  
repeatedly to select the  
“PGM” disappears while the system is  
stopped.  
desired folder, and then select the  
desired file.  
Example: When programming tracks  
on a CD  
To delete the last track or file of the  
program  
Press CLEAR  
stopped.  
while the system is  
Selected track or file number Total playing time of  
program (including  
selected track or file)  
ꢀꢅGB  
 
 
6
To call up a preset radio  
Presetting radio  
stations  
You can preset your favorite radio  
stations and tune them in instantly  
by selecting the corresponding preset  
number.  
Use buttons on the remote to preset  
stations.  
station, press TUNING MODE  
repeatedly until “PRESET”  
appears, and then press +/  
repeatedly to select the desired  
preset number.  
1
Tune in the desired station (see  
“Listening to the radio(page  
14)).  
.
2
Press TUNER MEMORY  
Preset number  
3
Press +/  
repeatedly to  
select your desired preset  
number.  
If another station is already assigned  
to the selected preset number,  
the station is replaced by the new  
stations.  
.
4
5
Press  
Repeat steps 1 through 4 to  
store other stations.  
You can preset up to 20 FM and 10  
AM stations.  
e preset stations are retained  
for about half a day even if you  
disconnect the power cord or if a  
power failure occurs.  
ꢁ0GB  
 
 
6
7
Select the sound source.  
Using the Timers  
e system offers two timer functions.  
If you use the Play Timer with the Sleep  
Timer, the Sleep Timer has priority.  
Press /  
repeatedly until the  
desired sound source appears, and  
then press  
the timer settings.  
. e display shows  
Press /  
to turn off the  
Sleep Timer:  
system.  
You can fall asleep to music. is  
function works even if the clock is not  
set.  
e system turns on 15 seconds  
before the preset time. If the system is  
on at the preset time, the Play Timer  
will not play.  
Press SLEEP  
repeatedly.  
If you select AUTO,” the system  
automatically turns off aſter the current  
disc or USB device stops or in 100  
minutes.  
Note  
Before the system is turned off, if a connection  
is made with the Bluetooth headphones,  
sounds played by the Play Timer may be output  
to the Bluetooth headphones.  
Play Timer:  
You can wake up to CD, tuner or optional  
USB device at a preset time.  
Use buttons on the remote to control the  
Play Timer. Make sure you have set the  
clock.  
To activate or check the timer again  
.
1
Press TIMER MENU  
“TIMER SEL?” flashes in the display.  
2
3
Press  
.
1
Prepare the sound source.  
Press /  
repeatedly to select  
Prepare the sound source, and then  
“PLAY SEL?.”  
press VOLUME +/  
volume.  
to adjust the  
.
4
Press  
To start from a specific track or file,  
create your own program (page 29).  
To cancel the timer  
.
2
3
Press TIMER MENU  
.
1
Press TIMER MENU  
“TIMER SEL?” flashes in the display.  
Press /  
repeatedly to  
select “PLAY SET?,and then  
.
2
3
Press  
.
press  
Press /  
repeatedly to select  
“ON TIME” appears, and the hour  
indication flashes.  
“TIMER OFF?.”  
.
4
Press  
4
5
Set the time to start playing.  
To change the setting  
Press /  
repeatedly to set the  
hour, and then press  
. e  
Start over from step 1.  
minute indication flashes. Use the  
procedure above to set the minutes.  
Tip  
e Play Timer setting remains as long as the  
setting is not canceled manually.  
Use the same procedure as in  
step 4 to set the time to stop  
playing.  
ꢁ1GB  
 
 
Severe hum or noise.  
Move the system away from sources of  
Others  
noise.  
Connect the system to a different wall  
socket.  
Install a noise filter (available  
separately) to the power cord.  
Troubleshooting  
Make sure the power cord and  
speaker cords are correctly and firmly  
connected.  
1
There is no sound.  
If the BLUETOOTH indicator  
is lit  
2
Find your problem in the checklist  
below, and take the indicated  
corrective action.  
If the issue persists, contact your  
nearest Sony dealer.  
or flashing when a function other than  
the Bluetooth function is selected, no  
sound is heard through the speakers  
or PHONES jack . Press and hold  
BLUETOOTH  
for about 2 seconds  
until the BLUETOOTH indicator  
turns off.  
If the STANDBY indicator flashes  
Immediately unplug the power cord,  
and check the following items.  
If your system has a voltage  
selector, is the voltage selector set to  
the correct voltage?  
The remote does not function.  
Remove any obstacles between the  
remote and the remote sensor  
on  
the unit, and position the unit away  
from fluorescent lights.  
Are you using only the supplied  
speakers?  
Point the remote at the system’s sensor.  
Move the remote closer to the system.  
Is anything blocking the ventilation  
holes on the top or back of the  
system?  
The STANDBY indicator  
remains lit  
after unplugging the power cord.  
Aſter the STANDBY indicator  
e STANDBY indicator  
may not  
stops flashing, reconnect the power  
cord, and turn on the system. If the  
issue persists, contact your nearest  
Sony dealer.  
turn off immediately aſter unplugging  
the power cord. is is not a  
malfunction. e indicator will turn off  
aſter about 40 seconds.  
CD/MP3 player  
General  
The sound skips, or the disc will not  
play.  
Wipe the disc clean, and replace it.  
Move the system to a location away  
from vibration (for example, on top of  
a stable stand).  
Move the speakers away from the  
system, or place them on separate  
stands. At high volume, speaker  
vibration may cause the sound to skip.  
Sound comes from one channel,  
or the left and right volumes are  
unbalanced.  
Place the speakers as symmetrically as  
possible.  
Connect only the supplied speakers.  
ꢁꢀGB  
 
 
Play does not start from the first  
track.  
Erase the pairing registration  
information of a Bluetooth device and  
perform the pairing operation again.  
Press PLAY MODE  
repeatedly until  
both “PGM” and “SHUF” disappear to  
return to normal play.  
The sound skips or fluctuates, or the  
connection is lost.  
e system and the Bluetooth device  
are too far apart.  
If there are obstacles between the  
system and your Bluetooth device,  
remove or avoid the obstacles.  
If there is equipment that generates  
electromagnetic radiation, such as a  
wireless LAN, other Bluetooth device,  
or a microwave oven nearby, move  
them away.  
Starting playback takes more time  
than usual.  
e following discs take a longer time  
to start playback.  
a disc recorded with a complicated  
tree structure.  
a disc recorded in multisession  
mode.  
a disc that has not been finalized (a  
disc to which data can be added).  
a disc that has many folders.  
The sound of your Bluetooth device  
cannot be heard on this system.  
Bluetooth device  
Turn up the volume on your Bluetooth  
device first, and then adjust the volume  
Pairing cannot be done.  
Move the Bluetooth device closer to  
the system.  
Pairing may not be possible if other  
Bluetooth devices are present around  
the system. In this case, turn off the  
other Bluetooth devices.  
Enter the same passkey that was  
entered at the Bluetooth device  
correctly.  
.
using VOLUME +/  
Severe hum or noise  
If there are obstacles between the  
system and your Bluetooth device,  
remove or avoid the obstacles.  
If there is equipment that generates  
electromagnetic radiation, such as a  
wireless LAN, other Bluetooth device,  
or a microwave oven nearby, move  
them away.  
Connection is not possible.  
Turn down the volume of the  
connected Bluetooth device.  
e Bluetooth device you attempted  
to connect does not support the A2DP  
profile, and cannot be connected with  
the system.  
Enable the Bluetooth function of the  
Bluetooth device.  
The sound from the Bluetooth  
headphones is distorted.  
Turn down the volume of the system  
using VOLUME . If your  
Establish a connection from the  
Bluetooth device.  
headphones have a volume control,  
also adjust the volume using the  
headphone’s volume control.  
e pairing registration information  
has been erased. Perform the pairing  
operation again.  
While connected to a Bluetooth device,  
this system cannot be detected and a  
connection cannot be established from  
another Bluetooth device.  
Press DSGX  
on the unit repeatedly  
until “DSGX OFF” appears.  
Press EQ  
repeatedly to select  
“BASS” or “TREBLE,” and then press  
level.  
repeatedly to turn down the  
Continued  
ꢁꢁGB  
 
e USB device was disconnected  
or the power was turned off during  
recording. Delete the partially-  
recorded file, and record again. If this  
does not fix the problem, the USB  
device may be broken. Refer to the  
USB device operation manual for  
how to deal with this problem. If the  
problem persists, contact your nearest  
Sony dealer.  
USB device  
You cannot start recording to an USB  
device.  
e following problems may have  
occurred.  
e USB device is full.  
e number of files and folders on  
the USB device has reached the  
upper limit.  
e USB device is write-protected.  
Files or folders on the USB device  
cannot be erased.  
Check if the USB device is write-  
protected.  
e USB device was disconnected  
or the power was turned off during  
the erase operation. Delete the  
partially-erased file. If this does not  
fix the problem, the USB device may  
be broken. Refer to the USB device  
operation manual for how to deal with  
this problem. If the problem persists,  
contact your nearest Sony dealer.  
Recording is stopped before it is  
finished.  
You are using an unsupported USB  
device. See “USB devices” (page 43) for  
the supported device types.  
e USB device is not formatted  
correctly. Refer to the USB device  
operation manual for how to format.  
Turn off the system and remove the  
USB device. If the USB device has a  
power switch, turn the USB device  
off and then on again aſter removing  
it from the system. en perform  
recording again.  
Are you using a supported USB  
device?  
If the recording and erase operations  
are repeated multiple times, the file  
structure within the USB device  
becomes fragmented. Refer to the USB  
device operation manual for how to  
deal with this problem. If the problem  
persists, contact your nearest Sony  
dealer.  
If you connect an unsupported USB  
device, the following problems may  
occur. See “USB devices” (page 43) for  
the supported device types.  
e USB device is not recognized.  
File or folder names are not  
displayed on this system.  
Playback is not possible.  
e sound skips.  
ere is noise.  
A distorted sound is output.  
Recording stops before it is finished.  
Recording to an USB device results in  
an error.  
You are using an unsupported USB  
device. See “USB devices” (page 43) for  
the supported device types.  
Turn off the system and remove the  
USB device. If the USB device has a  
power switch, turn the USB device  
off and then on again aſter removing  
it from the system. en perform  
recording again.  
ꢁꢆGB  
 
“Over Currentappears.  
Erroneous display  
A problem has been detected with the  
Send the music data to the USB device  
again, as the data stored in the USB  
device may have been corrupted.  
e character codes that can be  
displayed by this system are numbers  
and alphabet only. Other characters are  
not displayed correctly.  
level of electrical current from the  
(USB) port . Turn off the system and  
remove the USB device from the  
(USB) port . Make sure there is no  
problem with the USB device. If this  
display pattern persists, contact your  
nearest Sony dealer.  
The USB device is not recognized.  
Turn off the system and reconnect the  
USB device, then turn on the system.  
Connect the supported USB device  
(page 43).  
e USB device does not work  
properly. Refer to the USB device  
operation manual for how to deal with  
this problem. If the problem persists,  
contact your nearest Sony dealer.  
There is no sound.  
e USB device is not connected  
correctly. Turn off the system and  
reconnect the USB device, then turn  
on the system and check if “USB  
MEMORY” appears.  
There is noise, skipping, or distorted  
sound.  
Turn off the system, then reconnect the  
USB device.  
e music data itself contains noise, or  
the sound is distorted. Noise may have  
entered during the recording process.  
Delete the file, and try recording again.  
Play does not start.  
Turn off the system and reconnect the  
USB device, then turn on the system.  
Connect the supported USB device  
(page 43).  
Press (or USB  on the unit)  
The USB device cannot be connected  
to start play.  
.
into the  
(USB) port  
e USB device is being connected  
backwards. Connect the USB device in  
the correct orientation.  
Play does not start from the first  
track.  
Set the play mode to Normal Play  
mode.  
“Readingis displayed for an  
extended time, or it takes a long time  
before playback starts.  
e reading process can take a long  
time in the following cases.  
ere are many folders or files on the  
USB device.  
e file structure is extremely  
complex.  
e memory capacity is excessive.  
e internal memory is fragmented.  
us, we recommend following these  
guidelines.  
Total folders on USB device: 100 or  
less  
Files cannot be played back.  
The audio file does not have the  
extension .mp3, “.wma, “.m4a.  
The data is not stored in MP3/WMA/  
AAC format.  
USB storage media formatted with file  
systems other than FAT16 or FAT32  
are unsupported.*  
If you use partitioned USB storage  
media, only files on the first partition  
can be played.  
Playback is possible up to 8 levels.  
Total files per folder: 100 or less  
Continued  
ꢁꢂGB  
 
The number of folders has exceeded  
To improve tuner reception  
999.  
Turn off CD player power by using the  
CD power management function. By  
default, CD power is turned on.  
The number of files has exceeded 999.  
Files that are encrypted or protected by  
passwords, etc. cannot be played back.  
1
2
Press FUNCTION +/(or FUNCTION  
on the unit)  
repeatedly to select  
*
is system supports FAT16 and FAT32, but  
some USB storage media may not support all  
of these FAT. For details, see the operation  
manual of each USB storage media or  
contact the manufacturer.  
the CD function, and then turn off  
the system.  
After “STANDBYstops flashing, press  
/  
on the unit while holding  
Tuner  
down /CANCEL  
on the unit.  
“CD POWER OFF” appears. With CD  
player power turned off, disc access  
time is increased. To turn on CD  
player power, repeat the procedure  
until “CD POWER ON” appears.  
Severe hum or noise, or stations  
cannot be received. (“TUNEDorST”  
flashes on the display.)  
Connect the antenna properly.  
Find a location and an orientation that  
provide good reception, and then set  
up the antenna again.  
Keep the antennas away from the  
speaker cords, the power cord and the  
USB cable to avoid picking up noise.  
Connect a commercially available  
external antenna.  
Consult your nearest Sony dealer if the  
supplied AM antenna has come off the  
plastic stand.  
To reset the system to factory settings  
If the system still does not operate  
properly, reset the system to factory  
settings.  
Use buttons on the unit to reset the  
system to its factory default settings.  
1
Disconnect and reconnect the power  
cord, and then turn on the system.  
2
Press /CANCEL , DSGX  
and  
Turn off nearby electrical equipment.  
/  
at the same time.  
All user-configured settings, such as  
preset radio stations, timer, and the  
clock, are deleted.  
To change the AM tuning interval  
e AM tuning interval is factory-preset  
to 9 kHz (or 10 kHz, for some areas; this  
function is not available on the European  
and Russian models).  
Use buttons on the unit to change the  
AM tuning interval.  
1
Tune in any AM station, and then  
turn off the system.  
2
While holding down TUNER/BAND  
, press /  
.
All the AM preset stations are erased.  
To reset the interval to the factory  
preset, repeat the procedure.  
ꢁꢃGB  
 
Please Wait: e system is readying for  
usage of a Bluetooth device.  
Messages  
USB device  
CD/MP3 player, Tuner  
Complete!: e audio file or folder on  
Complete!: e preset operation ended  
the USB device has been erased.  
normally.  
Device Full!: e USB device is full.  
Erase Error!: Erase of audio files or  
folders on the USB device failed.  
LOCKED: e disc tray does not open.  
Contact your nearest Sony dealer.  
No Disc: ere is no disc in the system,  
or you have loaded a disc that cannot  
be played.  
No Step: All of the programmed tracks  
or files have been erased.  
Error: e USB device could not be  
recognized or an unknown device is  
connected (page 35).  
Fatal Error!: e USB device has been  
disconnected while recording to or  
erasing audio files or folders on the  
USB device.  
Folder Full!: e number of folders  
on the USB device has reached the  
maximum.  
No Device: No USB device is connected  
or the connected USB device has been  
stopped.  
Over: You have reached the end of the  
disc while pressing   
during  
playback or pause.  
Push STOP!: You pressed PLAY MODE  
during playback.  
Reading: e system is reading  
information of the disc. Some buttons  
are not available.  
Step Full!: You tried to program more  
than 26 tracks or files (steps).  
TIME NG!: e Play Timer start and end  
times are set to the same time.  
No Step: All of the programmed tracks  
or files have been erased.  
No Track: No playable file is loaded in  
the system.  
Not in Use: You have made an invalid  
Bluetooth device  
operation.  
Connect: Bluetooth communication was  
Not Supported: An unsupported USB  
device is connected.  
Please Wait: e system is readying for  
usage of an USB device.  
Protected!: You tried to record or erase  
a write-protected USB device.  
Reading: e system is recognizing the  
USB device.  
Rec Error!: Recording did not start,  
stopped partway, or otherwise could  
not be performed (page 34).  
Removed: e USB device has been  
removed.  
Step Full!: You tried to program more  
than 26 tracks or files (steps).  
Storage Drive: USB device is connected.  
established.  
Connecting: e system is attempting  
to connect with recently connected  
Bluetooth devices.  
Disconnect: Communication with a  
Bluetooth device was cut off for some  
reason, or Bluetooth communication  
was ended.  
No Device: A pairable Bluetooth device  
was not found, or connection was not  
possible.  
Not in Use: e system is not connected  
with a Bluetooth device using A2DP, or  
the Bluetooth device does not support  
a command for selecting a folder  
operations (  
+/).  
Track Full!: e number of files on the  
USB device has reached the maximum.  
PIN?: e system is asking for the  
passkey. For details, see “Using the  
Bluetooth function” (page 15).  
ꢁꢄGB  
 
 
On safety  
Completely disconnect the power  
cord (mains lead) from the wall socket  
(mains) if it is not going to be used  
for an extended period of time. When  
unplugging the unit, always grip the  
plug. Never pull the cord itself.  
Precautions  
Discs that this system CAN play  
Audio CD  
CD-R/CD-RW (audio data/MP3 files)  
Should any solid object or liquid get  
into the system, unplug the system, and  
have it checked by qualified personnel  
before operating it again.  
e AC power cord can be changed  
only by a qualified service facility.  
Discs that this system CANNOT play  
CD-ROM  
CD-R/CD-RW other than those  
recorded in music CD format or MP3  
format conforming to ISO9660 Level  
1/Level 2, Joliet or multisession  
CD-R/CD-RW recorded in  
multisession that have not ended by  
“closing the session”  
CD-R/CD-RW of poor recording  
quality, CD-R/CD-RW that have  
scratches or are dirty, or CD-R/CD-  
RW recorded with an incompatible  
recording device  
CD-R/CD-RW which is finalized  
incorrectly  
Discs containing files other than  
MPEG 1 Audio Layer-3 (MP3) files  
On placement  
Do not place the system in an inclined  
position or in locations that are  
extremely hot, cold, dusty, dirty, or  
humid or lacking adequate ventilation,  
or subject to vibration, direct sunlight  
or a bright light.  
Be careful when placing the unit  
or speakers on surfaces that have  
been specially treated (for example,  
with wax, oil, polish) as staining or  
discoloration of the surface may result.  
Discs of non-standard shape (for  
If the system is brought directly  
from a cold to a warm location or is  
placed in a very damp room, moisture  
may condense on the lens inside the  
CD player, and cause the system to  
malfunction. In this situation, remove  
the disc, and leave the system turned  
on for about an hour until the moisture  
evaporates.  
example, heart, square, star)  
Discs that have adhesive tape, paper, or  
sticker attached to them  
Rental or used discs with attached seals  
where the glue extends beyond the seal  
Discs that have labels printed using ink  
that feels tacky when touched  
Notes on discs  
On heat buildup  
Before playing, wipe the disc with a  
cleaning cloth from the center out to  
the edge.  
Do not clean discs with solvents, such  
as benzine thinner, or commercially  
available cleaners or anti-static spray  
intended for vinyl LPs.  
Do not expose discs to direct sunlight  
or heat sources such as hot air ducts,  
nor leave it in a car parked in direct  
sunlight.  
Heat buildup on the unit during  
operation is normal and is not cause  
for alarm.  
Do not touch the cabinet if it has been  
used continuously at a high volume  
because the cabinet may have become  
hot.  
Do not obstruct the ventilation holes.  
ꢁꢇGB  
 
 
On the speaker system  
is speaker system is not magnetically  
shielded, and the picture on nearby TV  
sets may become magnetically distorted.  
In this situation, turn off the TV, wait  
15 to 30 minutes, and turn it back on.  
If there is no improvement, move the  
speakers far away from the TV.  
Specifications  
Main unit (HCD-HX70BTR, HCD-HX50BTR/  
Compact Disc Receiver)  
Amplifier section  
Cleaning the cabinet  
CMT-HXꢄ0BTR  
Clean this system with a soſt cloth  
slightly moistened with a mild detergent  
solution. Do not use any type of abrasive  
pad, scouring powder, or solvent, such as  
thinner, benzine, or alcohol.  
DIN power output (rated):  
60 + 60 watts (4 ohms at 1 kHz, DIN)  
Continuous RMS power output  
(reference): 75 + 75 watts (4 ohms at  
1 kHz, 10% THD)  
Music power output (reference):  
75 + 75 watts (4 ohms at 1 kHz, 10%  
THD)  
CMT-HXꢂ0BTR  
European and Russian models:  
DIN power output (rated):  
40 + 40 watts (6 ohms at 1 kHz, DIN)  
Continuous RMS power output  
(reference): 50 + 50 watts (6 ohms at  
1 kHz, 10% THD)  
Music power output (reference):  
50 + 50 watts (6 ohms at 1 kHz, 10%  
THD)  
Other models:  
DIN power output (rated):  
40 + 40 watts (6 ohms at 1 kHz, DIN)  
Continuous RMS power output  
(reference): 50 + 50 watts (6 ohms at  
1 kHz, 10% THD)  
Inputs:  
AUDIO IN (stereo mini jack):  
voltage 250 mV, impedance  
22 kilohms  
(USB) port: Type A, maximum  
current 500 mA  
Outputs:  
PHONES (stereo mini jack): accepts  
headphones of 8 ohms or more  
SPEAKER: accepts impedance of  
4 ohms (CMT-HX70BTR) or 6 ohms  
(CMT-HX50BTR)  
Continued  
ꢁꢅGB  
 
 
Bluetooth section  
CD player section  
Communication system:  
System: Compact disc and digital audio  
system  
Bluetooth Standard version 2.0  
Output:  
Laser Diode Properties  
Bluetooth Standard Power Class 2  
Emission duration: Continuous  
Laser Output*: Less than 44.6µW  
* is output is the value measurement  
at a distance of 200mm from the  
objective lens surface on the Optical  
Pick-up Block with 7mm aperture.  
Frequency response: 20 Hz 20 kHz  
Signal-to-noise ratio: More than 90 dB  
Dynamic range: More than 90 dB  
Maximum communication range:  
Line of sight approx. 10 m1)  
Frequency band:  
2.4 GHz band (2.4000 GHz   
2.4835 GHz)  
Modulation method:  
FHSS  
Compatible Bluetooth profiles2):  
A2DP (Advanced Audio Distribution  
Profile)  
Tuner section  
FM stereo, FM/AM superheterodyne tuner  
AVRCP (Audio Video Remote  
Control Profile)  
Supported codecs:  
FM tuner section:  
Tuning range  
Receive: SBC (Sub Band Codec), MP3  
Transmit: SBC (Sub Band Codec)  
e actual range will vary depending on  
Canadian model: 87.5 108.0 MHz  
(100 kHz step)  
1)  
factors such as obstacles between devices,  
magnetic fields around a microwave oven,  
static electricity, reception sensitivity,  
antenna’s performance, operating system,  
soſtware application, etc.  
Bluetooth standard profiles indicate the  
purpose of Bluetooth communication  
between devices.  
Other models: 87.5 108.0 MHz  
(50 kHz step)  
Antenna: FM lead antenna  
Antenna terminals: 75 ohms unbalanced  
Intermediate frequency: 10.7 MHz  
AM tuner section:  
2)  
Tuning range  
European and Russian models:  
531 1,602 kHz (with 9 kHz tuning  
interval)  
USB section  
Supported bit rate  
Canadian and Latin American  
models:  
MP3 (MPEG 1 Audio Layer-3):  
32 320 kbps, VBR  
WMA: 32 192 kbps, VBR  
AAC: 48 320 kbps  
Sampling frequencies  
MP3 (MPEG 1 Audio Layer-3):  
32/44.1/48 kHz  
530 1,710 kHz (with 10 kHz tuning  
interval)  
531 1,710 kHz (with 9 kHz tuning  
interval)  
Australian model:  
531 1,710 kHz (with 9 kHz tuning  
interval)  
WMA: 44.1 kHz  
AAC: 44.1 kHz  
530 1,710 kHz (with 10 kHz tuning  
interval)  
Other models:  
531 1,602 kHz (with 9 kHz tuning  
interval)  
530 1,610 kHz (with 10 kHz tuning  
interval)  
Antenna: AM loop antenna, external  
antenna terminal  
Intermediate frequency: 450 kHz  
ꢆ0GB  
 
Design and specifications are subject to  
change without notice.  
Speaker (SS-CHX70 for CMT-HX70BTR)  
Speaker system: 2 way speaker system, Bass  
reflex  
Standby power consumption:  
0.5 W  
Halogenated flame retardants  
are not used in the certain  
printed wiring boards.  
Halogenated flame retardants  
are not used in cabinets.  
Speaker units: Woofer 13 cm, glass fiber  
cone type, Tweeter 2.5 cm, soſt dome type  
Rated impedance: 4 ohms  
Dimensions (w/h/d): Approx. 172 × 331 ×  
225 mm  
Mass: Approx. 3.7 kg  
Speaker (SS-CHX50 for CMT-HX50BTR)  
Speaker system: 2 way speaker system, Bass  
reflex  
Speaker units: Woofer 12 cm, cone type,  
Tweeter 4 cm, cone type  
Rated impedance: 6 ohms  
Dimensions (w/h/d): Approx. 146 × 262 ×  
200 mm  
Mass: Approx. 2.2 kg  
General  
Power requirements  
European and Russian models:  
220 240 V AC, 50/60 Hz  
Canadian model: 120 V AC, 60 Hz  
Mexican model: 127 V AC, 60 Hz  
Australian model: 220 240 V AC,  
50/60 Hz  
Korean model: 220 240 V AC,  
50/60 Hz  
Latin American models (except for  
Mexican model):  
120 127, 220 240 V AC,  
50/60 Hz, adjustable with voltage  
selector  
Other models:  
220 240 V AC, 50/60 Hz  
Power consumption  
CMT-HX70BTR: 50 watts  
CMT-HX50BTR: 40 watts  
Dimensions (w/h/d) (excl. speakers):  
Approx. 305 × 116 × 225 mm  
Mass (excl. speakers): Approx. 2.8 kg  
Supplied accessories: Remote Commander  
(RM-AMU009) (1), R6 (Size AA) batteries  
(2), AM loop antenna (1), FM lead antenna  
(1), Speaker pads (8), Speaker cable (2)  
(CMT-HX70BTR only), DIGITAL MEDIA  
PORT adapter (TDM-iP10 (M)) (For  
Canadian model and European model  
(except for Russian model))  
41GB  
 
Effective communication range  
Bluetooth devices should be used within  
approximately 10 meters (unobstructed  
distance) of each other. e effective  
communication range may become  
shorter under the following conditions.  
Bluetooth wireless  
technology  
Bluetooth wireless technology is a short-  
range wireless technology linking digital  
devices, such as personal computers and  
digital still cameras. Using the Bluetooth  
wireless technology, you can operate the  
units involved within a range of about 10  
meters.  
When a person, metal object, wall  
or other obstruction is between the  
devices with a Bluetooth connection  
Locations where a wireless LAN is  
installed  
Around microwave ovens that are in  
use  
Locations where other electromagnetic  
waves occur  
e Bluetooth wireless technology is  
commonly used between two devices,  
but a single device can be connected to  
multiple devices.  
You do not need wires to get connected  
as you do with a USB connection, and  
you do not need to place the devices face  
to face as you do with wireless infrared  
technology. You can use the technology  
with one Bluetooth device in your bag  
or pocket.  
Bluetooth wireless technology is a global  
standard supported by thousands of  
companies. ese companies produce  
products that meet the global standard.  
Effects of other devices  
Bluetooth devices and wireless LAN  
(IEEE 802.11b/g) use the same frequency  
band (2.4 GHz). When using your  
Bluetooth device near a device with  
wireless LAN capability, electromagnetic  
interference may occur. is could result  
in lower data transfer rates, noise, or  
inability to connect. If this happens, try  
the following remedies:  
Try connecting this system and  
Bluetooth mobile phone or Bluetooth  
device when you are at least 10  
meters away from the wireless LAN  
equipment.  
Turn off the power to the wireless LAN  
equipment when using your Bluetooth  
device within 10 meters.  
Supported Bluetooth version and  
profiles  
Profile refers to a standard set of  
capabilities for various Bluetooth product  
capabilities. is system supports the  
following Bluetooth version and profiles.  
Supported Bluetooth version:  
Bluetooth Standard version 2.0  
Supported Bluetooth profiles:  
A2DP (Advanced Audio Distribution  
Profile)  
AVRCP (Audio Video Remote  
Control Profile)  
ꢆꢀGB  
 
 
Effects on other devices  
e radio waves broadcast by this system  
may interfere with the operation of some  
medical devices. Since this interference  
may result in malfunction, always turn  
off the power on this system, Bluetooth  
mobile phone and Bluetooth device in  
the following locations:  
Compatible devices  
with this system  
USB devices  
You can use the following Sony USB  
devices on this system. Other USB  
devices are not playable/recordable on  
this system.  
In hospitals, on trains, in airplanes,  
at gas stations, and any place where  
flammable gasses may be present  
Near automatic doors or fire alarms  
Verified Sony digital music player (as  
of March 2008)  
Notes  
is system supports security functions that  
comply with the Bluetooth specification  
as a means of ensuring security during  
communication using Bluetooth technology.  
However, this security may be insufficient  
depending on the setting contents and  
other factors, so always be careful when  
performing communication using Bluetooth  
technology.  
Sony cannot be held liable in any way  
for damages or other loss resulting from  
information leaks during communication  
using Bluetooth technology.  
Product name Model name  
NWD-B103 / B103F /  
Walkman  
®
B105 / B105F  
NWZ-B103F / B105F  
NWZ-A815 / A816 /  
A818  
NWZ-S515 / S516 /  
S615F / S616F / S618F  
Check the websites below for the latest  
information about compatible devices.  
For customers in the U.S.A.:  
Bluetooth communication is not necessarily  
guaranteed with all Bluetooth devices that  
have the same profile as this system.  
Bluetooth devices connected with this system  
must comply with the Bluetooth specification  
prescribed by the Bluetooth SIG, Inc., and  
must be certified to comply. However, even  
when a device complies with the Bluetooth  
specification, there may be cases where  
the characteristics or specifications of the  
Bluetooth device make it impossible to  
connect, or may result in different control  
methods, display or operation.  
Noise may occur or the audio may  
cut off depending on the Bluetooth  
device connected with this system,  
the communications environment, or  
surrounding conditions.  
<http://www.sony.com/shelfsupport>  
For customers in Canada:  
ElectronicsSupport/>  
ElectronicsSupport/>  
For customers in Europe:  
<http://support.sony-europe.com/>  
For customers in Latin America:  
<http://www.sony-latin.com/index.crp>  
For customers in Asia and Oceania:  
<http://www.sony-asia.com/support>  
Notes  
When formatting the USB device, be sure  
to format using the device itself or the  
dedicated formatting soſtware for that device.  
Otherwise, you may be unable to record the  
USB device properly on this system.  
Continued  
43GB  
 
 
Do not use USB devices other than these  
USB devices. Operation of models not listed  
here is not guaranteed.  
Operation may not always be ensured even  
when using these USB devices.  
Some of these USB devices may not be  
available for purchase in certain areas.  
Notes on Walkman  
®
When transferring music to a Walkman  
®
using “Media Manager for WALKMAN,” be  
sure to transfer in MP3 format. Files in MP4  
format (AAC or VIDEO) are not displayed  
by this system.  
When connecting a Walkman to the system,  
®
be sure to connect aſter the display “Creating  
Library” or “Creating Database” on the  
Walkman has disappeared.  
®
Bluetooth devices  
You can check the websites below for the  
Bluetooth compatible devices.  
For customers in the U.S.A.:  
<http://www.sony.com/shelfsupport>  
For customers in Canada:  
ElectronicsSupport/>  
ElectronicsSupport/>  
For customers in Europe:  
<http://support.sony-europe.com/>  
For customers in Latin America:  
<http://www.sony-latin.com/index.crp>  
For customers in Asia and Oceania:  
<http://www.sony-asia.com/support>  
Printed in China  
 

Sennheiser Power Supply MZN 16 X User Manual
Sharp Camera Accessories CE AG06 User Manual
Sharp Stereo System CD SW440N User Manual
Shoprider Mobility Aid Jetstream L 888WAL User Manual
Shure Microphone 27E3027 User Manual
Socket Mobile Network Card EmETX i602 User Manual
Sony Home Theater System Model HTR 6100 User Manual
Sony Kitchen Entertainment Center VGN SZ300 User Manual
Sony Laptop GR150K User Manual
Sony Switch SDT S9000 BM User Manual