Pioneer Car Stereo System DEH 4400BT User Manual

Operation Manual  
CD RDS RECEIVER  
DEH-4400BT  
English  
Section  
Before you start  
01  
Demo mode  
Important  
!
Failure to connect the red lead (ACC) of this  
unit to a terminal coupled with ignition switch  
on/off operations may lead to battery drain.  
Remember that if the feature demo continues  
operating when the car engine is turned off, it  
may drain battery power.  
!
The demo starts automatically if you do not op-  
erate this unit within about 30 seconds since  
the unit was last operated or if the ignition  
switch is set to ACC or ON while the unit is  
turned off. To cancel the demo mode, you  
need to display the initial settings. Select  
DEMO (demo display setting) and turn off the  
demo display. For details, refer to Initial set-  
In case of trouble  
Should this unit fail to operate properly, please  
contact your dealer or nearest authorized  
PIONEER Service Station.  
3
En  
Section  
02  
Operating this unit  
Head unit  
Operation is the same as when using the but-  
tons on the head unit.  
12 3 4  
5
6
78 9 a  
b
c de  
Part  
Part  
(back/display)  
c/d  
1
2
h (eject)  
(list)  
8
9
Part  
Operation  
MULTI-CONTROL  
(M.C.)  
BAND/ (iPod con-  
trol)  
Press to display the phone menu.  
Press and hold to display the con-  
nection menu.  
Press to reject an incoming call  
or cancel making a call.  
3
a
f
PHONE  
4
5
SRC/OFF  
b
c
1 to 6  
Disc loading slot  
PTY  
While operating the phone, press  
to end a call or reject an incoming  
call.  
AUX input jack  
(3.5 mm stereo  
jack)  
/CAN-  
CEL  
g
h
6
7
USB port  
d
e
Press to perform manual seek  
tuning, fast forward, reverse and  
track search controls. Also used  
for controlling functions.  
(phone/on  
hook)  
Detach button  
a/b/c/d  
CAUTION  
Press to start talking on the  
phone while operating a phone.  
Press to switch between callers  
on hold.  
!
Use an optional Pioneer USB cable (CD-U50E)  
to connect the USB audio player/USB mem-  
ory as any device connected directly to the  
unit will protrude out from the unit and may  
be dangerous.  
i
j
/START  
Press to increase or decrease vo-  
lume.  
VOLUME  
!
Do not use unauthorized products.  
Optional remote control  
The remote control CD-SR110 is sold separately.  
Display indication  
1
3 5  
2 4  
7
9 b  
8 a  
6
4
En  
Section  
Operating this unit  
02  
2
Turn M.C. to switch to YES. Press M.C.  
Indicator  
State  
to select.  
!
!
Tuner: band and frequency  
#
If you do not operate for 30 seconds, the set  
RDS: program service name,  
PTY information and other lit-  
eral information  
Built-in CD, USB storage de-  
vice and iPod: elapsed play-  
back time and text  
up menu will not be displayed.  
#
M.C. to switch to NO. Press to select.  
If you select NO, you cannot set up in the set up  
menu.  
If you prefer not to set up at this time, turn  
Main dis-  
play sec-  
tion  
1
!
information  
3
Perform the following procedures to  
The list function is being oper-  
ated.  
set the menu.  
To proceed to the next menu option, you need  
to confirm your selection.  
2
3
(list)  
(iPod  
control)  
This units iPod function is oper-  
ated from your iPod.  
CLOCK SET (setting the clock)  
4
5
6
7
LOC  
(TA)  
(TP)  
Local seek tuning is on.  
TA function is on.  
1
2
3
4
Turn M.C. to adjust hour.  
Press M.C. to select minute.  
Turn M.C. to adjust minute.  
Press M.C. to confirm the selection.  
A TP station is tuned in.  
(repeat) Track or folder repeat is on.  
Random play is on.  
(ran-  
FM STEP (FM tuning step)  
The iPod source is selected and  
8
dom/shuf-  
fle)  
Normally, the FM tuning step employed by seek tun-  
ing is 50 kHz. When AF or TA is on, the tuning step  
automatically changes to 100 kHz. It may be prefer-  
able to set the tuning step to 50 kHz when AF is on.  
the shuffle or shuffle all function  
is on.  
(auto  
answer)  
Shows when the automatic an-  
swering function is on.  
9
a
!
The tuning step remains at 50 kHz during manual  
tuning.  
Connected to a Bluetooth device.  
The line is on hold.  
1
2
Turn M.C. to select the FM tuning step.  
50 (50 kHz)100 (100 kHz)  
Press M.C. to confirm the selection.  
(Bluetooth  
indicator)  
The sound retriever function is  
on.  
DEMO (demo display setting)  
b
(sound re-  
triever)  
1
2
Turn M.C. to set the demo display to on or off.  
Press M.C. to confirm the selection.  
TITLE (multi-language)  
This unit can display the text information of a com-  
pressed audio file even if they are embedded in a  
Western European or Russian language.  
Set up menu  
When you turn the ignition switch to ON after  
installation, set up menu appears on the dis-  
play.  
!
If the embedded language and the selected lan-  
guage setting are not the same, text information  
may not display properly.  
You can set up the menu options below.  
!
1
Some characters may not be displayed properly.  
Turn M.C. to select the desired setting.  
EUR (European)RUS (Russian)  
1
After installation of this unit, turn the  
2
Press M.C. to confirm the selection.  
QUIT appears.  
ignition switch to ON.  
SET UP appears.  
5
En  
Section  
02  
Operating this unit  
4
To finish your settings, turn M.C. to se-  
Removing the front panel to protect your unit from  
theft  
lect YES. Press to select.  
If you prefer to change your setting again, turn  
#
1
Press the detach button to release the front  
panel.  
M.C. to switch to NO. Press to select.  
2
Push the front panel upward (M) and then pull it  
toward (N) you.  
Notes  
!
!
You can set up the menu options in the initial  
settings. For details about the settings, refer to  
You can cancel set up menu by pressing SRC/  
OFF.  
3
Always keep the detached front panel in a protec-  
tion device such as a protection case.  
Basic operations  
Re-attaching the front panel  
Important  
1
Slide the front panel to the left.  
Make sure to insert the tabs on the left side of the  
head unit into the slots on the front panel.  
!
!
!
!
Handle gently when removing or attaching  
the front panel.  
Avoid subjecting the front panel to excessive  
shock.  
Keep the front panel out of direct sunlight and  
high temperatures.  
To avoid damaging the device or vehicle inter-  
ior, remove any cables and devices attached  
to the front panel before detaching it.  
2
Press the right side of the front panel until it is  
firmly seated.  
If you cannot attach the front panel to the head  
unit successfully, make sure that you are placing  
the front panel onto the head unit correctly. For-  
cing the front panel into place may result in da-  
mage to the front panel or head unit.  
Turning the unit on  
Press SRC/OFF to turn the unit on.  
1
Turning the unit off  
Press and hold SRC/OFF until the unit turns off.  
1
Selecting a source  
1
Press SRC/OFF to cycle between:  
TUNER (tuner)CD (built-in CD player)USB  
(USB)/iPod (iPod)AUX (AUX)BT AUDIO  
(Bluetooth audio)  
Adjusting the volume  
1
Turn M.C. to adjust the volume.  
CAUTION  
For safety reasons, park your vehicle when remov-  
ing the front panel.  
6
En  
Section  
Operating this unit  
02  
Note  
Rejecting an incoming call  
When a call is received, press  
When this units blue/white lead is connected to  
the vehicles auto-antenna relay control terminal,  
the vehicles antenna extends when this units  
source is turned on. To retract the antenna, turn  
the source off.  
1
.
Answering a call waiting  
When a call is received, press M.C.  
1
Switching between callers on hold  
Press M.C.  
1
Canceling call waiting  
Press  
1
.
Using Bluetooth telephone  
Adjusting the other partys listening volume  
Important  
1
Press c or d while talking on the phone.  
When private mode is on, this function is not  
available.  
!
!
Since this unit is on standby to connect with  
your cellular phone via Bluetooth wireless  
technology, using it without the engine run-  
ning can drain the battery power.  
Turning private mode on or off  
Press BAND/ while talking on the phone.  
1
!
!
Operations may vary depending on the kind of  
cellular phone.  
Switching the information display  
Press while talking on the phone.  
1
Advanced operations that require attention  
such as dialing numbers on the monitor,  
using the phone book, etc., are prohibited  
while driving. Park your vehicle in a safe place  
when using these advanced operations.  
Notes  
!
!
If private mode is selected on the cellular  
phone, hands-free phoning may not be avail-  
able.  
The estimated call time appears in the display  
(this may differ slightly from the actual call  
time).  
Setting up for hands-free phoning  
Before you can use the hands-free phoning  
function you must set up the unit for use with  
your cellular phone.  
Menu operations identical  
for set up menu/function  
settings/audio adjustments/  
initial settings/lists  
1
Connection  
Operate the Bluetooth telephone connection  
2
Function settings  
Returning to the previous display  
Returning to the previous list (the folder one level  
higher)  
Operate the Bluetooth telephone function menu.  
1
Press  
.
Returning to the ordinary display  
Canceling the initial setting menu/set up menu  
Basic operations  
1
Press BAND/  
.
Making a phone call  
Returning to the ordinary display from the list  
1
1
Press BAND/  
.
Answering an incoming call  
1
When a call is received, press M.C.  
Ending a call  
1
Press  
.
7
En  
Section  
02  
Operating this unit  
Tuner  
Switching the RDS display  
%
Press  
.
Basic operations  
Program service namePTY informationEn-  
tertainmentFrequency  
Selecting a band  
1
Press BAND/ until the desired band (FM1,  
FM2,FM3 for FM or MW/LW) is displayed.  
#
PTY information and the frequency appear on  
the display for eight seconds.  
Depending on the band, text information can  
#
Recalling preset stations  
be changed.  
1
!
Press c or d.  
If MAN (manual tuning) is selected in SEEK, you  
cannot recall preset stations. You need to select  
PCH (preset channel) in SEEK. For details about  
the settings, refer to SEEK (left/right key setting)  
Using PTY functions  
You can tune in to a station using PTY (pro-  
gram type) information.  
Manual tuning (step by step)  
Searching for an RDS station by PTY information  
You can search for general types of broadcasting pro-  
grams, such as those listed in the following section.  
Refer to this page.  
1
!
Press c or d.  
If PCH (preset channel) is selected in SEEK, you  
cannot tune up or down manually. You need to se-  
lect MAN (manual tuning) in SEEK. For details  
about the settings, refer to SEEK (left/right key set-  
1
2
Press PTY.  
Turn M.C. to select a program type.  
NEWS/INFOPOPULARCLASSICSOTHERS  
Press M.C. to begin the search.  
Seeking  
Press and hold c or d, and then release.  
3
1
The unit searches for a station broadcasting that  
type of program. When a station is found, its pro-  
gram service name is displayed.  
You can cancel seek tuning by briefly pressing c  
or d.  
While pressing and holding c or d, you can skip  
stations. Seek tuning starts as soon as you re-  
lease c or d.  
PTY (program type ID code) information is listed  
in the following section. Refer to this page.  
!
!
To cancel the search, press M.C. again.  
The program of some stations may differ from  
that indicated by the transmitted PTY.  
Note  
This units AF (alternative frequencies search)  
function can be turned on and off. AF should be  
off for normal tuning operation (refer to AF (alter-  
!
If no station is broadcasting the type of pro-  
gram you searched for, NOT FOUND is dis-  
played for about two seconds and then the  
tuner returns to the original station.  
PTY list  
Storing and recalling stations  
for each band  
NEWS/INFO  
Using preset tuning buttons  
NEWS (News), AFFAIRS (Current affairs), INFO (Infor-  
mation), SPORT (Sports), WEATHER (Weather), FI-  
NANCE (Finance)  
1
When you find a station that you want  
to store in memory, press one of the preset  
tuning buttons (1 to 6) and hold until the  
preset number stops flashing.  
POPULAR  
POP MUS (Popular music), ROCK MUS (Rock  
music), EASY MUS (Easy listening), OTH MUS  
(Other music), JAZZ (Jazz), COUNTRY (Country  
music), NAT MUS (National music), OLDIES (Oldies  
music), FOLK MUS (Folk music)  
2
Press one of the preset tuning buttons  
(1 to 6) to select the desired station.  
CLASSICS  
L. CLASS (Light classical), CLASSIC (Classical)  
8
En  
 
Section  
Operating this unit  
02  
OTHERS  
You can tune in to a station using PTY (program type)  
information.  
EDUCATE (Education), DRAMA (Drama), CULTURE  
(Culture), SCIENCE (Science), VARIED (Varied), CHIL-  
DREN (Childrens), SOCIAL (Social affairs), RELIGION  
(Religion), PHONE IN (Phone in), TOURING (Travel),  
LEISURE (Leisure), DOCUMENT (Documentaries)  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
NEWS/INFOPOPULARCLASSICSOTHERS  
Press M.C. to begin the search.  
3
The unit searches for a station broadcasting that  
type of program. When a station is found, its pro-  
gram service name is displayed.  
For PTY (program type ID code) information, refer  
Function settings  
1
Press M.C. to display the main menu.  
The program of some stations may differ from  
that indicated by the transmitted PTY.  
If no station is broadcasting the type of program  
you searched for, NOT FOUND is displayed for  
about two seconds and then the tuner returns to  
the original station.  
2
Turn M.C. to change the menu option  
and press to select FUNCTION.  
Turn M.C. to select the function.  
3
After selecting, perform the following proce-  
dures to set the function.  
TA (traffic announcement standby)  
#
If MW/LW band is selected, only BSM, LOCAL  
1
Press M.C. to turn traffic announcement standby  
on or off.  
and SEEK are available.  
AF (alternative frequencies search)  
BSM (best stations memory)  
1
Press M.C. to turn AF on or off.  
BSM (best stations memory) automatically stores the  
six strongest stations in the order of their signal  
strength.  
NEWS (news program interruption)  
1
Press M.C. to turn BSM on.  
To cancel, press M.C. again.  
1
Press M.C. to turn the NEWS function on or off.  
SEEK (left/right key setting)  
REGION (regional)  
You can assign a function to the left and right keys of  
the unit.  
Select MAN (manual tuning) to tune up or down  
manually or select PCH (preset channel) to switch be-  
tween preset channels.  
When AF is used, the regional function limits the se-  
lection of stations to those broadcasting regional pro-  
grams.  
1
Press M.C. to turn the regional function on or off.  
1
Press M.C. to select MAN or PCH.  
LOCAL (local seek tuning)  
Local seek tuning lets you tune in to only those radio  
stations with sufficiently strong signals for good re-  
ception.  
1
Press M.C. to select the desired setting.  
FM: OFFLV1LV2LV3LV4  
MW/LW: OFFLV1LV2  
The highest level setting allows reception of only  
the strongest stations, while lower levels allow the  
reception of weaker stations.  
CD/CD-R/CD-RW and USB  
storage devices  
Basic operations  
Playing a CD/CD-R/CD-RW  
PTY SEARCH (program type selection)  
1
Insert the disc into the disc loading slot with the  
label side up.  
Ejecting a CD/CD-R/CD-RW  
Press h.  
1
9
En  
 
Section  
02  
Operating this unit  
Selecting and playing files/  
tracks from the name list  
Playing songs on a USB storage device  
1
2
Open the USB port cover.  
Plug in the USB storage device using a USB  
cable.  
1
Press  
to switch to the file/track  
A song will be played automatically.  
name list mode.  
Stopping playback of files on a USB storage device  
2
Use M.C. to select the desired file name  
1
You may disconnect the USB storage device at  
any time.  
(or folder name).  
The unit stops playback.  
Changing the file or folder name  
Selecting a folder  
Press 1/ or 2/  
1
Turn M.C.  
1
.
Playing  
Selecting a track  
Press c or d.  
1
When a file or track is selected, press M.C.  
1
Viewing a list of the files (or folders) in the selected  
folder  
Fast forwarding or reversing  
1
!
Press and hold c or d.  
When playing compressed audio, there is no  
sound during fast forward or reverse.  
1
When a folder is selected, press M.C.  
Playing a song in the selected folder  
1
When a folder is selected, press and hold M.C.  
Returning to root folder  
Press and hold BAND/  
1
.
Switching between compressed audio and CD-DA  
Press BAND/  
Advanced operations using  
special buttons  
1
.
Switching between playback memory devices  
You can switch between playback memory devices on  
USB storage devices with more than one Mass Sto-  
rage Device-compatible memory device.  
Selecting a repeat play range  
1
Press 6/  
to cycle between the following:  
CD/CD-R/CD-RW  
1
!
Press BAND/  
You can switch between up to 32 different mem-  
ory devices.  
.
!
!
!
ALL Repeat all tracks  
ONE Repeat the current track  
FLD Repeat the current folder  
USB audio player/USB memory  
Note  
!
!
!
ALL Repeat all files  
ONE Repeat the current file  
FLD Repeat the current folder  
Disconnect USB storage devices from the unit  
when not in use.  
Playing tracks in random order  
1
Press 5/  
to turn random play on or off.  
Displaying text information  
Tracks in a selected repeat range are played in  
random order.  
To change songs during random play, press d to  
switch to the next track. Pressing c restarts play-  
back of the current track from the beginning of  
the song.  
Selecting the desired text information  
!
1
!
Press  
.
Depending on the version of iTunes used to write  
MP3 files to a disc or media file types, incompati-  
ble text stored within an audio file may be dis-  
played incorrectly.  
Pausing playback  
Press 4/PAUSE to pause or resume.  
1
!
Text information items that can be changed de-  
pend on the media.  
Enhancing compressed audio and restoring rich  
sound (sound retriever)  
1
Press 3/S.Rtrv to cycle between:  
12OFF (off)  
1 is effective for low compression rates, and 2 is  
effective for high compression rates.  
10  
En  
 
Section  
Operating this unit  
Function settings  
02  
Selecting an album  
1
!
Press 1/ or 2/  
.
1
Press M.C. to display the main menu.  
The album may not be selected correctly if the  
iPod has more than one album with the same  
title on it. Select the album you want to listen to  
using list search. For details, refer to Browsing for  
2
Turn M.C. to change the menu option  
and press to select FUNCTION.  
Turn M.C. to select the function.  
3
Fast forwarding or reversing  
Press and hold c or d.  
After selecting, perform the following proce-  
dures to set the function.  
1
Notes  
REPEAT (repeat play)  
!
!
!
The iPod cannot be turned on or off when the  
1
Press M.C. to select a repeat play range.  
control mode is set to CTRL AUDIO.  
Disconnect headphones from the iPod before  
connecting it to this unit.  
The iPod will turn off about two minutes after  
the ignition switch is set to OFF.  
RANDOM (random play)  
1
Press M.C. to turn random play on or off.  
PAUSE (pause)  
Displaying text information  
1
Press M.C. to pause or resume.  
Selecting the desired text information  
S.RTRV (sound retriever)  
1
Press  
.
Automatically enhances compressed audio and re-  
stores rich sound.  
1
Press M.C. to select the desired setting.  
For details, refer to Enhancing compressed audio  
Browsing for a song  
1
Press  
to switch to the top menu of  
list search.  
2
Use M.C. to select a category/song.  
Changing the name of the song or category  
1
Turn M.C.  
iPod  
Basic operations  
Playlistsartistsalbumssongspodcasts—  
genrescomposersaudiobooks  
Playing  
Playing songs on an iPod  
1
When a song is selected, press M.C.  
1
2
Open the USB port cover.  
Connect an iPod to the USB cable using an iPod  
Dock Connector.  
Viewing a list of songs in the selected category  
1
When a category is selected, press M.C.  
A song will be played automatically.  
Playing a song in the selected category  
1
When a category is selected, press and hold M.C.  
Selecting a song (chapter)  
Press c or d.  
1
Searching the list by alphabet  
1
When a list for the selected category is displayed,  
press to switch to alphabet search mode.  
!
You also can switch to alphabet search mode  
by turning M.C. twice.  
2
3
Turn M.C. to select a letter.  
Press M.C. to display the alphabetical list.  
!
To cancel searching, press  
.
11  
En  
 
Section  
02  
Operating this unit  
Notes  
!
!
ALBUM Plays a song from the album cur-  
rently being played.  
GENRE Plays an album from the genre  
currently being played.  
!
You can play playlists created with the PC ap-  
plication (MusicSphere). The application will  
be available on our website.  
The selected song/album will be played after  
the currently playing song.  
!
Playlists that you created with the PC applica-  
tion (MusicSphere) are displayed in abbre-  
viated form.  
Notes  
!
The selected song/album may be canceled if  
you operate functions other than link search  
(e.g. fast forward and reverse).  
Advanced operations using  
special buttons  
!
Depending on the song selected to play, the  
end of the currently playing song and the be-  
ginning of the selected song/album may be  
cut off.  
Selecting a repeat play range  
1
Press 6/  
to cycle between the following:  
OFF Repeat off  
ONE Repeat the current song  
ALL Repeat all songs in the selected list  
!
!
!
!
You cannot select OFF when CTRL AUDIO is se-  
Operating this units iPod  
function from your iPod  
You can listen to the sound from your iPod ap-  
plications using your cars speakers, when  
CTRL APP is selected.  
Playing all songs in random order (shuffle all)  
1
!
Press 5/  
to turn shuffle all on.  
When the control mode is set to CTRL iPod/CTRL  
APP, shuffle play is on.  
!
This function is not compatible with iPod  
nano 1st generation.  
Pausing playback  
Press 4/PAUSE to pause or resume.  
APP Mode is compatible with the following  
iPod models.  
1
Enhancing compressed audio and restoring rich  
sound (sound retriever)  
!
!
!
!
!
iPhone 4 (software version 4.1 or later)  
iPhone 3GS (software version 3.0 or later)  
iPhone 3G (software version 3.0 or later)  
iPhone (software version 3.0 or later)  
iPod touch 4th generation (software version  
4.1 or later)  
1
Press 3/S.Rtrv to cycle between:  
12OFF (off)  
1 is effective for low compression rates, and 2 is  
effective for high compression rates.  
!
!
!
iPod touch 3rd generation (software version  
3.0 or later)  
iPod touch 2nd generation (software ver-  
sion 3.0 or later)  
iPod touch 1st generation (software version  
3.0 or later)  
Playing songs related to the  
currently playing song  
You can play songs from the following lists.  
Album list of the currently playing artist  
Song list of the currently playing album  
Album list of the currently playing genre  
%
Press BAND/ to switch the control  
mode.  
1
Press and hold M.C. to switch to link  
!
!
!
CTRL iPod This units iPod function can  
play mode.  
be operated from the connected iPod.  
CTRL APP Play back the sound from your  
iPod applications.  
2
Turn M.C. to change the mode; press to  
select.  
!
ARTIST Plays an album of the artist cur-  
CTRL AUDIO This units iPod function  
can be operated from this unit.  
rently being played.  
12  
En  
 
Section  
Operating this unit  
02  
Notes  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to change the mode; press to select.  
For details about the settings, refer to Playing  
!
Switching the control mode to CTRL iPod/  
CTRL APP pauses song playback. Operate the  
iPod to resume playback.  
!
The following functions are still accessible  
from the unit even if the control mode is set to  
CTRL iPod/CTRL APP.  
PAUSE (pause)  
Pausing  
1
Press M.C. to pause or resume.  
Fast forward/reverse  
Selecting a song (chapter)  
AUDIO BOOK (audiobook speed)  
!
When the control mode is set to CTRL iPod,  
operations are limited as follows:  
The function settings are not available.  
The browse function cannot be operated  
from this unit.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select your favorite setting.  
!
FASTER Playback at a speed faster than nor-  
mal  
!
!
NORMAL Playback at normal speed  
SLOWER Playback at a speed slower than  
normal  
3
Press M.C. to confirm the selection.  
Function settings  
S.RTRV (sound retriever)  
1
Press M.C. to display the main menu.  
Automatically enhances compressed audio and re-  
stores rich sound.  
1
2
Turn M.C. to change the menu option  
Press M.C. to select the desired setting.  
For details, refer to Enhancing compressed audio  
and press to select FUNCTION.  
Turn M.C. to select the function.  
3
After selecting, perform the following proce-  
dures to set the function.  
!
When the control mode is set to CTRL iPod/  
CTRL APP, only PAUSE or S.RTRV is avail-  
able.  
REPEAT (repeat play)  
1
Press M.C. to select a repeat play range.  
SHUFFLE (shuffle)  
1
Press M.C. to select your favorite setting.  
!
!
!
SNG Play back songs in the selected list in  
random order.  
ALB Play back songs from a randomly se-  
lected album in order.  
OFF Cancel random play.  
SHUFFLE ALL (shuffle all)  
1
Press M.C. to turn shuffle all on.  
To turn off, set SHUFFLE in the FUNCTION menu  
to off.  
LINK PLAY (link play)  
13  
En  
Section  
02  
Operating this unit  
Using Bluetooth wireless  
technology  
1
2
Press M.C. to start searching.  
To cancel, press M.C. while searching.  
Turn M.C. to select a device from the device list.  
!
!
!
If the desired device is not displayed, select  
RE-SEARCH.  
6-digit number appears on the display of this  
unit. Once the connection is established, this  
number disappears.  
Connection menu operation  
Important  
!
!
Be sure to park your vehicle in a safe place  
and apply the parking brake when performing  
this operation.  
Connected devices may not operate properly if  
more than one is connected at a time. Con-  
necting one device at a time is recommended.  
!
Press and hold M.C. to switch the Bluetooth  
device address and device name.  
3
Press M.C. to connect the selected device.  
!
To complete the connection, check the device  
name (DEH-4400BT) and enter the PIN code  
on your device.  
PIN code is set to 0000 as the default. You  
can change this code.  
If you are unable to complete the connection  
using this unit, use the device to connect to  
the unit.  
If 3 devices are already paired, DEVICEFULL is  
displayed and it is not possible to perform this  
operation. In this case, delete a paired device  
first.  
1
Press and hold  
to display the con-  
!
!
nection menu.  
#
You cannot operate this step during a call.  
2
Turn M.C. to select the function.  
!
After selecting, perform the following proce-  
dures to set the function.  
!
When the control mode is set to CTRL iPod/  
CTRL APP, only PAUSE or S.RTRV is avail-  
able.  
SPCLDEVICE (setting a special device)  
Bluetooth devices that are difficult to establish a con-  
nection with are called special devices. If your  
Bluetooth device is listed as a special device, select  
the appropriate one.  
DEVICELIST (connecting or disconnecting a device  
from the device list)  
!
When no device is selected in the device list, this  
function is not available.  
1
Press M.C. to display the setting mode.  
!
If 3 devices are already paired, DEVICEFULL is  
displayed and it is not possible to perform this  
operation. In this case, delete a paired device  
first.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the name of a device you want  
to connect/disconnect.  
!
Press and hold M.C. to switch the Bluetooth  
device address and device name.  
2
3
4
Turn M.C. to display a special device. Press to se-  
lect.  
Turn M.C. to display this units device name,  
Bluetooth device address and PIN code.  
Use a device to connect to this unit.  
3
Press M.C. to connect/disconnect the selected de-  
vice.  
If the connection is established, * is indicated on  
the device name.  
!
To complete the connection, check the device  
name (DEH-4400BT) and enter the PIN code  
on your device.  
DEL DEVICE (deleting a device from the device list)  
!
PIN code is set to 0000 as the default. You  
can change this code.  
!
When no device is selected in the device list, this  
function is not available.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the name of a device you want  
to delete.  
A. CONN (connecting to a Bluetooth device automati-  
cally)  
!
Press and hold M.C. to switch the Bluetooth  
device address and device name.  
1
Press M.C. to turn automatic connection on or  
off.  
3
4
Press M.C. to display DELETE YES.  
Press M.C. to delete a device information from  
the device list.  
VISIBLE (setting the visibility of this unit)  
!
While this function is in use, do not turn off the  
engine.  
ADD DEVICE (connecting a new device)  
14  
En  
 
Section  
Operating this unit  
02  
tening to songs on your Bluetooth audio  
player.  
To check the availability of this unit from other de-  
vices, Bluetooth visibility of this unit can be turned  
on.  
!
When a call is in progress on the cellular  
phone connected to this unit via Bluetooth  
wireless technology, the sound of the  
Bluetooth audio player connected to this unit  
is muted.  
When the Bluetooth audio player is in use,  
you cannot connect to a Bluetooth telephone  
automatically.  
1
Press M.C. to turn the visibility of this unit on or  
off.  
!
While setting SPCLDEVICE, Bluetooth visibility  
of this unit is turned on temporarily.  
PIN CODE (PIN code input)  
!
!
To connect your device to this unit via Bluetooth wire-  
less technology, you need to enter a PIN code on your  
device to verify the connection. The default code is  
0000, but you can change it with this function.  
Playback continues even if you switch from  
your Bluetooth audio player to another source  
while listening to a song.  
1
2
3
Press M.C. to display the setting mode.  
Turn M.C. to select a number.  
Press M.C. to move the cursor to the next posi-  
tion.  
Even though your audio player does not con-  
tain a Bluetooth module, you can still control  
it from this unit via Bluetooth wireless technol-  
ogy using a Bluetooth adapter (sold sepa-  
rately).  
4
After inputting PIN code, press and hold M.C.  
!
After inputting, pressing M.C. returns you to  
the PIN code input display, and you can  
change the PIN code.  
DEV. INFO (Bluetooth device address display)  
Setting up for Bluetooth audio  
1
2
Press M.C. to display the setting mode.  
Turn M.C. left to switch to the Bluetooth device  
address.  
Before you can use the Bluetooth audio func-  
tion you must set up the unit for use with your  
Bluetooth audio player. This entails establish-  
ing a Bluetooth wireless connection between  
this unit and your Bluetooth audio player, and  
pairing your Bluetooth audio player with this  
unit.  
Turning M.C. right returns to the device name.  
Bluetooth Audio  
Important  
!
!
Depending on the Bluetooth audio player con-  
nected to this unit, the available operations  
will be limited to the following two levels:  
A2DP profile (Advanced Audio Distribution  
Profile): You can only playback songs on  
your audio player.  
AVRCP profile (Audio/Video Remote Con-  
trol Profile): You can perform playback,  
pause playback, select songs, etc.  
Since there are a number of Bluetooth audio  
players available on the market, available op-  
erations will vary extensively. When operating  
your player with this unit, refer to the instruc-  
tion manual that came with your Bluetooth  
audio player as well as this manual.  
Information related to a song (such as the  
elapsed playing time, song title, song index,  
etc.) cannot be displayed on this unit.  
As the signal from your cellular phone may  
cause noise, avoid using it when you are lis-  
Basic operations  
Fast forwarding or reversing  
1
Press and hold c or d.  
Selecting a track  
1
Press c or d.  
Starting playback  
1
Press BAND/  
.
Function settings  
1
Press M.C. to display the main menu.  
2
Turn M.C. to change the menu option  
and press to select FUNCTION.  
Turn M.C. to select the function.  
!
!
3
After selecting, perform the following proce-  
dures to set the function.  
15  
En  
Section  
02  
Operating this unit  
PLAY (play)  
!
!
The phone book in your cellular phone will be  
transferred automatically when the phone is con-  
nected to this unit.  
Depending on the cellular phone, the phone book  
may not be transferred automatically. In this case,  
operate your cellular phone to transfer the phone  
book. The visibility of this unit should be on. Refer  
1
Press M.C. to start playback.  
STOP (stop)  
1
Press M.C. to stop the playback.  
PAUSE (pause)  
1
Press M.C. to turn pause on.  
1
2
Press M.C. to display SEARCH (alphabetical list).  
Turn M.C. to select the first letter of the name you  
are looking for.  
!
Press and hold M.C. to select the desired  
character type.  
TOP (alphabet)ΟΛΑ (Greek alphabet)ВСЕ  
(Cyrillic alphabet)  
Phone menu operation  
Important  
Be sure to park your vehicle in a safe place and  
apply the parking brake when performing this op-  
eration.  
3
4
5
6
Press M.C. to display a registered name list.  
Turn M.C. to select the name you are looking for.  
Press M.C. to display the phone number list.  
Turn M.C. to select a phone number you want to  
call.  
1
Press  
to display the phone menu.  
!
When you find a phone number that you want  
to store in memory, press and hold one of the  
preset tuning buttons (1 to 6).  
Press one of preset buttons 1 to 6 to recall the  
desired preset number.  
#
When PW SAVE is on, you cannot display the  
phone menu. For details about the settings, refer  
!
2
Turn M.C. to select the function.  
7
Press M.C. to make a call.  
After selecting, perform the following proce-  
dures to set the function.  
PRESET 1-6 (preset phone numbers)  
1
2
Press M.C. to display the setting mode.  
Use M.C. to select the desired preset number.  
Turn to change the menu option. Press to select.  
MISSED (missed call history)  
DIALLED (dialed call history)  
RECEIVED (received call history)  
!
You can also press one of the preset number  
buttons 1 to 6 to select a number.  
Press M.C. to make a call.  
1
2
Press M.C. to display the phone number list.  
Turn M.C. to select a name or phone number.  
3
!
When you find a phone number that you want  
to store in memory, press and hold one of the  
preset tuning buttons (1 to 6).  
Press one of preset buttons 1 to 6 to recall the  
desired preset number.  
PHONE FUNC (phone function)  
You can set A. ANSR and R.TONE from this menu.  
For details, refer to Function and operation on this  
!
3
Press M.C. to make a call.  
PHONE BOOK (phone book)  
Function and operation  
1
Display PHONE FUNC.  
2
Press M.C. to display the function  
menu.  
3
Turn M.C. to select the function.  
After selecting, perform the following proce-  
dures to set the function.  
16  
En  
 
Section  
Operating this unit  
02  
A. ANSR (automatic answering)  
Loudness compensates for deficiencies in the low-fre-  
quency and high-frequency ranges at low volume.  
1
Press M.C. to turn automatic answering on or off.  
1
Press M.C. to select the desired setting.  
OFF (off)LOW(low)HI (high)  
R.TONE (ring tone select)  
SUB.W (subwoofer on/off setting)  
1
Press M.C. to turn the ring tone on or off.  
This unit is equipped with a subwoofer output which  
can be turned on or off.  
PB INVT (phone book name view)  
1
Press M.C. to select the desired setting.  
NOR (normal phase)REV (reverse phase)OFF  
(subwoofer off)  
1
Press M.C. to switch between the lists of names.  
SUB.W CTRL (subwoofer adjustment)  
The cut-off frequency and output level can be ad-  
justed when the subwoofer output is on.  
Only frequencies lower than those in the selected  
range are outputted from the subwoofer.  
Audio adjustments  
1
Press M.C. to display the main menu.  
!
When you select OFF in SUB.W, you cannot select  
this function. For details, refer to SUB.W (subwoo-  
2
Turn M.C. to change the menu option  
and press to select AUDIO.  
Turn M.C. to select the audio function.  
1
2
Press M.C. to display the setting mode.  
Press M.C. to cycle between the cut-off frequency  
and output level of the subwoofer.  
Cut-off frequency (Cut-off frequency display  
flashes.)Output level (Output level display  
flashes.)  
3
After selecting, perform the following proce-  
dures to set the audio function.  
FAD/BAL (fader/balance adjustment)  
3
Turn M.C. to select the desired setting.  
Cut-off frequency: 50HZ63HZ80HZ100HZ  
125HZ  
1
2
Press M.C. to display the setting mode.  
Press M.C. to cycle between fader (front/rear) and  
balance (left/right).  
Output level: 24 to +6  
3
!
Turn M.C. to adjust speaker balance.  
When the rear output and RCA output setting are  
SW, you cannot adjust front/rear speaker balance.  
SLA (source level adjustment)  
SLA (Source level adjustment) lets you adjust the vo-  
lume level of each source to prevent radical changes  
in volume when switching between sources.  
!
!
!
Settings are based on the FM volume level, which  
remains unchanged.  
The MW/LW volume level can also be adjusted  
with this function.  
When selecting FM as the source, you cannot  
switch to SLA.  
PRESET EQ (equalizer recall)  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the equalizer.  
DYNAMICVOCALNATURALCUSTOM—  
FLATPOWERFUL  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to adjust the source volume.  
Adjustment range: +4 to 4  
3
Press M.C. to confirm the selection.  
3
Press M.C. to confirm the selection.  
TONE CTRL (equalizer adjustment)  
!
Adjusted equalizer curve settings are stored in  
CUSTOM.  
1
2
Press M.C. to display the setting mode.  
Press M.C. to select BASS (bass)/MID (mid)/TRE-  
BLE (treble).  
3
Turn M.C. to adjust the level.  
Adjustment range: +6 to 6  
LOUD (loudness)  
17  
En  
 
Section  
02  
Operating this unit  
Initial settings  
Activate this setting when using an auxiliary device  
connected to this unit.  
Important  
1
Press M.C. to turn AUX on or off.  
PW SAVE (power saving) is cancelled if the vehi-  
cle battery is disconnected and will need to be  
turned back on once the battery is reconnected.  
When PW SAVE (power saving) is off, depending  
on connection methods, the unit may continue to  
draw power from the battery if your vehicles igni-  
tion doesnt have an ACC (accessory) position.  
USB PNP (plug and play)  
This setting allows you to switch your source to USB/  
iPod automatically.  
1
Press M.C. to turn the plug and play function on  
or off.  
ON When a USB storage device/iPod is con-  
nected, depending on the type of device, the  
source is automatically switched to USB/iPod  
when you turn on the engine. If you disconnect  
your USB storage device/iPod, this units source  
is turned off.  
OFF When a USB storage device/iPod is con-  
nected, the source is not switched to USB/iPod  
automatically. Please change the source to USB/  
iPod manually.  
1
Press and hold SRC/OFF until the unit  
turns off.  
2
Press SRC/OFF and hold until function  
name appears in the display.  
3
Turn M.C. to select the initial setting.  
After selecting, perform the following proce-  
dures to set the initial setting.  
REAR-SP (rear output setting)  
The rear speaker leads output can be used for full-  
range speaker or subwoofer connection.  
If you switch to SW, you can connect a rear speaker  
lead directly to a subwoofer without using an auxiliary  
amp.  
CLOCK SET (setting the clock)  
1
2
Press M.C. to display the setting mode.  
Press M.C. to select the segment of the clock dis-  
play you wish to set.  
Initially, REAR-SP is set for rear full-range speaker  
connection (FUL).  
HourMinute  
3
Turn M.C. to adjust the clock.  
1
Press M.C. to select the desired setting.  
FULSW  
!
CLOCK (clock display)  
Even if you change this setting, there will be  
no output if you select OFF in SUB.W (Refer to  
If you change this setting, subwoofer output  
in the audio menu will return to the factory  
settings.  
You can turn the clock display on or off.  
The clock display disappears temporarily when you  
perform other operations, but the clock display ap-  
pears again after 25 seconds.  
!
1
Press M.C. to turn the clock display on or off.  
FM STEP (FM tuning step)  
PREOUT (preout setting)  
Normally, the FM tuning step employed by seek tun-  
ing is 50 kHz. When AF or TA is on, the tuning step  
automatically changes to 100 kHz. It may be prefer-  
able to set the tuning step to 50 kHz when AF is on.  
The RCA outputs can be used for rear speaker or sub-  
woofer connection.  
If you switch to SW, you can connect a rear speaker  
lead directly to a subwoofer without using an auxiliary  
amp.  
!
The tuning step remains at 50 kHz during manual  
tuning.  
Initially, PREOUT is set for rear full-range speaker con-  
nection (SW).  
1
Press M.C. to select the FM tuning step.  
50 (50 kHz)100 (100 kHz)  
1
Press M.C. to select the desired setting.  
AUTO-PI (auto PI seek)  
SWREA  
!
Even if you change this setting, there will be  
no output if you select OFF in SUB.W (Refer to  
If you change this setting, subwoofer output  
in the audio menu will return to the factory  
settings.  
The unit can automatically search for a different sta-  
tion with the same programming, even during preset  
recall.  
1
Press M.C. to turn Auto PI seek on or off.  
!
AUX (auxiliary input)  
DEMO (demo display setting)  
18  
En  
 
Section  
Operating this unit  
02  
BT VERSION (Bluetooth version display)  
1
!
Press M.C. to turn the demo display on or off.  
If PW SAVE is on, DEMO cannot be selected.  
You can display the system versions of this unit and  
of Bluetooth module.  
SCROLL (scroll mode setting)  
1
Press M.C. to display the information.  
When ever scroll is set to ON, recorded text informa-  
tion scrolls continuously in the display. Set to OFF if  
you prefer the information to scroll just once.  
S/W UPDATE (updating the software)  
This function is used to update this unit with the lat-  
est software. For information on the software and up-  
dating, refer to our website.  
1
Press M.C. to turn the ever scroll on or off.  
BT AUDIO (Bluetooth audio activation)  
!
Never turn the unit off while the software is being  
updated.  
You need to activate the BT AUDIO source in order to  
use a Bluetooth audio player.  
1
Press M.C. to display the data transfer mode.  
Follow the on-screen instructions to finish updat-  
ing the software.  
1
Press M.C. to turn the BT AUDIO source on or off.  
TITLE (multi-language)  
This unit can display the text information of a com-  
pressed audio file even if they are embedded in a  
Western European or Russian language.  
!
If the embedded language and the selected lan-  
guage setting are not the same, text information  
may not display properly.  
Switching the dimmer setting  
You can adjust the brightness of illumination.  
!
1
Some characters may not be displayed properly.  
Press M.C. to select the desired setting.  
EUR (European)RUS (Russian)  
%
Press and hold  
.
PW SAVE (power saving)  
Using an AUX source  
Switching this function on enables you to reduce the  
consumption of battery power.  
1
Insert the stereo mini plug into the  
AUX input jack.  
!
Turning on the source is the only operation al-  
lowed when this function is on.  
2
Press SRC/OFF to select AUX as the  
1
Press M.C. to turn the power save on or off.  
source.  
BT CLEAR (resetting the Bluetooth wireless technol-  
ogy module)  
Note  
AUX cannot be selected unless the auxiliary set-  
ting is turned on. For more details, refer to AUX  
Bluetooth device data can be deleted. To protect per-  
sonal information, we recommend deleting this data  
before transferring the unit to other persons. The fol-  
lowing settings will be deleted.  
!
!
!
phone book entries on the Bluetooth telephone  
preset numbers on the Bluetooth telephone  
registration assignment of the Bluetooth tele-  
phone  
!
!
!
1
call history of the Bluetooth telephone  
information of the connected Bluetooth telephone  
PIN code of the Bluetooth device  
Press M.C. to show the confirmation display.  
YES is displayed. Clearing memory is now on  
standby.  
If you do not want to reset phone memory, turn  
M.C. to display CANCEL and press to select.  
Press M.C. to clear the memory.  
2
CLEARED is displayed and the settings are de-  
leted.  
!
While this function is in use, do not turn off  
the engine.  
19  
En  
 
Appendix  
Additional information  
Troubleshooting  
Symptom  
Cause  
Action  
The sound  
from the  
Bluetooth  
audio source is nected cellular  
not played  
back.  
There is a call in The sound will be  
progress on a  
Bluetooth con-  
Symptom  
Cause  
Action  
played back when  
the call is termi-  
nated.  
The display illu- Demo mode is  
mination turns on.  
on and off at  
Turn off the demo  
display setting.  
phone.  
A Bluetooth-con- Do not operate the  
random.  
nected cellular  
phone is cur-  
rently being oper-  
ated.  
cellular phone at  
this time.  
The display  
automatically form any opera- again.  
returns to the tion within about  
ordinary dis-  
play.  
You did not per- Perform operation  
30 seconds.  
A call was made Reconnect the  
with a Bluetooth- Bluetooth connec-  
connected cellu- tion between this  
The repeat play Depending on  
range changes the repeat play  
unexpectedly. range, the se-  
lected range may  
Select the repeat  
play range again.  
lar phone and  
unit and the cellu-  
then immediately lar phone.  
terminated. As a  
result, communi-  
cation between  
this unit and the  
cellular phone  
change when an-  
other folder or  
track is being se-  
lected or during  
fast forwarding/  
reversing.  
was not termi-  
nated properly.  
A subfolder is Subfolders can- Select another re-  
not played  
back.  
not be played  
when FLD (folder  
repeat) is se-  
lected.  
peat play range.  
Error messages  
When you contact your dealer or your nearest  
Pioneer Service Center, be sure to note the  
error message.  
NO XXXX ap- There is no em-  
pears when a  
display is chan- mation.  
ged (NO TITLE,  
Switch the display  
bedded text infor- or play another  
track/file.  
for example).  
The unit is mal- You are using a  
Move electrical de-  
Built-in CD Player  
functioning.  
device, such as a vices that may be  
Message  
Cause  
Action  
There is inter- cellular phone,  
causing the inter-  
ference away from  
the unit.  
ference.  
that transmits  
electric waves  
near the unit.  
ERROR-07, 11, The disc is dirty. Clean the disc.  
12, 17, 30  
The disc is  
scratched.  
Replace the disc.  
ERROR-07, 10, There is an elec- Turn the ignition  
11, 12, 15, 17, trical or mechan- switch OFF and  
30, A0  
ical error.  
back ON, or switch  
to a different  
source, then back  
to the CD player.  
ERROR-15  
ERROR-23  
The inserted disc Replace the disc.  
is blank.  
Unsupported CD Replace the disc.  
format.  
20  
En  
Appendix  
Additional information  
Message  
Cause  
Sometimes there Wait until the mes-  
is a delay be- sage disappears  
tween the start of and you hear  
Action  
Message  
Cause  
Action  
FRMT READ  
PROTECT  
All the files in the Transfer audio files  
USB storage de- not embedded with  
vice are em-  
bedded with  
Windows Media  
DRM 9/10 to the  
playback and  
sound.  
when you start to  
hear any sound.  
Windows Media USB storage de-  
DRM 9/10. vice and connect.  
NO AUDIO  
The inserted disc Replace the disc.  
N/A USB  
The USB device ! Connect a USB  
connected to is Mass Storage  
not supported by Class compliant  
does not contain  
any playable  
files.  
this unit.  
device.  
! Disconnect your  
device and replace  
it with a compati-  
ble USB storage  
device.  
SKIPPED  
PROTECT  
The inserted disc Replace the disc.  
contains DRM  
protected files.  
All the files on  
the inserted disc  
are embedded  
with DRM.  
Replace the disc.  
CHECK USB  
The USB connec- Check that the  
tor or USB cable USB connector or  
has short-  
circuited.  
USB cable is not  
caught in some-  
thing or damaged.  
USB storage device/iPod  
The connected  
USB storage de- USB storage de-  
vice consumes  
more than  
500 mA (maxi-  
Disconnect the  
Message  
Cause  
Action  
NO DEVICE  
When plug and ! Turn the plug  
play is off, no and play on.  
USB storage de- ! Connect a com-  
vice or iPod is  
connected.  
vice and do not  
use it. Turn the  
ignition switch to  
patible USB sto-  
rage device/iPod.  
mum allowable OFF, then to ACC  
current).  
or ON and then  
connect only com-  
pliant USB storage  
devices.  
FRMT READ  
NO AUDIO  
Sometimes there Wait until the mes-  
is a delay be- sage disappears  
tween the start of and you hear  
playback and  
when you start to  
hear any sound.  
sound.  
The iPod oper-  
Make sure the con-  
ates correctly but nection cable for  
does not charge. the iPod has not  
shorted out (e.g.,  
There are no  
songs.  
Transfer the audio  
files to the USB  
storage device and  
connect.  
not caught in  
metal objects).  
After checking,  
turn the ignition  
switch OFF and  
back ON, or dis-  
connect the iPod  
The connected  
USB storage de- storage device in-  
vice has security structions to dis-  
Follow the USB  
enabled.  
able the security.  
and reconnect.  
SKIPPED  
The connected  
Play an audio file  
USB storage de- not embedded with  
vice contains  
files embedded  
with Windows  
Mediaä DRM 9/  
10.  
Windows Media  
DRM 9/10.  
21  
En  
Appendix  
Additional information  
Bluetooth device  
Message  
Cause  
Action  
Message  
Cause  
Action  
ERROR-19  
Communication Perform one of the  
failed.  
following opera-  
tions.  
Turn the ignition  
switch OFF and  
back ON.  
Disconnect the  
USB storage de-  
vice.  
ERROR-10  
The power failed Turn the ignition  
for the Bluetooth switch OFF and  
module of this  
unit.  
then to ACC or ON.  
If the error mes-  
sage is still dis-  
played after  
performing the  
above action,  
Change to a dif-  
ferent source.  
Then, return to the  
USB source.  
please contact  
your dealer or an  
authorized Pioneer  
Service Station.  
iPod failure.  
Disconnect the  
cable from the  
iPod. Once the  
iPods main menu  
is displayed, recon-  
nect the iPod and  
reset it.  
Handling guidelines  
Discs and player  
ERROR-23  
ERROR-16  
USB storage de- USB storage de-  
vice was not for- vice should be for-  
Use only discs that feature either of the following two  
logos.  
matted with  
matted with FAT12,  
FAT12, FAT16 or FAT16 or FAT32.  
FAT32.  
The iPod firm-  
ware version is  
old.  
Update the iPod  
version.  
iPod failure.  
Disconnect the  
cable from the  
iPod. Once the  
iPods main menu  
is displayed, recon-  
nect the iPod and  
reset it.  
Use 12-cm discs. Do not use 8-cm discs or an adapter  
for 8-cm discs.  
Use only conventional, fully circular discs. Do not use  
shaped discs.  
STOP  
There are no  
Select a list that  
songs in the cur- contains songs.  
rent list.  
NOT FOUND  
No related  
songs.  
Transfer songs to  
the iPod.  
Do not insert anything other than a CD into the CD  
loading slot.  
Do not use cracked, chipped, warped, or otherwise  
damaged discs as they may damage the player.  
Unfinalized CD-R/RW discs cannot be played back.  
Do not touch the recorded surface of the discs.  
Store discs in their cases when not in use.  
Do not attach labels, write on or apply chemicals to  
the surface of the discs.  
22  
En  
Appendix  
Additional information  
To clean a CD, wipe the disc with a soft cloth outward  
from the center.  
About iPod settings  
!
When an iPod is connected, this unit changes the  
EQ (equalizer) setting of the iPod to off in order to  
optimize the acoustics. When you disconnect the  
iPod, the EQ returns to the original setting.  
Condensation may temporarily impair the players  
performance. Let it rest for about one hour to adjust  
to a warmer temperature. Also, wipe any damp discs  
off with a soft cloth.  
!
You cannot set Repeat to off on the iPod when  
using this unit. Repeat is automatically changed  
to All when the iPod is connected to this unit.  
Playback of discs may not be possible because of  
disc characteristics, disc format, recorded applica-  
tion, playback environment, storage conditions, and  
so on.  
Incompatible text saved on the iPod will not be dis-  
played by the unit.  
Road shocks may interrupt disc playback.  
DualDiscs  
When using discs that can be printed on label sur-  
faces, check the instructions and the warnings of the  
discs. Depending on the discs, inserting and ejecting  
may not be possible. Using such discs may result in  
damage to this equipment.  
DualDiscs are two-sided discs that have a recordable  
CD for audio on one side and a recordable DVD for  
video on the other.  
Since the CD side of DualDiscs is not physically com-  
patible with the general CD standard, it may not be  
possible to play the CD side with this unit.  
Frequent loading and ejecting of a DualDisc may re-  
sult in scratches on the disc. Serious scratches can  
lead to playback problems on this unit. In some  
cases, a DualDisc may become stuck in the disc load-  
ing slot and will not eject. To prevent this, we recom-  
mend you refrain from using DualDisc with this unit.  
Please refer to the information from the disc manu-  
facturer for more detailed information about  
DualDiscs.  
Do not attach commercially available labels or other  
materials to the discs.  
!
!
The discs may warp making the disc unplayable.  
The labels may come off during playback and pre-  
vent ejection of the discs, which may result in da-  
mage to the equipment.  
USB storage device  
Connections via USB hub are not supported.  
Do not connect anything other than a USB storage  
device.  
Firmly secure the USB storage device when driving.  
Do not let the USB storage device fall onto the floor,  
where it may become jammed under the brake or ac-  
celerator pedal.  
Compressed audio  
compatibility (disc, USB)  
WMA  
Depending on the USB storage device, the following  
problems may occur.  
File extension: .wma  
!
!
!
!
Operations may vary.  
The storage device may not be recognized.  
Files may not be played back properly.  
The device may generate noise in the radio.  
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to  
384 kbps (VBR)  
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz  
Windows Media Audio Professional, Lossless, Voice/  
DRM Stream/Stream with video: Not compatible  
iPod  
Do not leave the iPod in places with high tempera-  
tures.  
MP3  
To ensure proper operation, connect the dock connec-  
tor cable from the iPod directly to this unit.  
File extension: .mp3  
Bit rate: 8 kbps to 320 kbps (CBR), VBR  
Firmly secure the iPod when driving. Do not let the  
iPod fall onto the floor, where it may become jammed  
under the brake or accelerator pedal.  
Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz,  
48 kHz for emphasis)  
23  
En  
Appendix  
Additional information  
USB storage device  
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3  
tag Version 2.x is given priority over Version 1.x.)  
Playable folder hierarchy: up to eight tiers (A practical  
hierarchy is less than two tiers).  
M3u playlist: Not compatible  
MP3i (MP3 interactive), mp3 PRO: Not compatible  
Playable folders: up to 500  
Playable files: up to 15 000  
WAV  
Playback of copyright-protected files: Not compatible  
File extension: .wav  
Partitioned USB storage device: Only the first partition  
can be played.  
Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM)  
There may be a slight delay when starting playback of  
audio files on a USB storage device with numerous  
folder hierarchies.  
Sampling frequency: 16 kHz to 48 kHz (LPCM),  
22.05 kHz and 44.1 kHz (MS ADPCM)  
Supplemental information  
CAUTION  
Only the first 32 characters can be displayed as a file  
name (including the file extension) or a folder name.  
!
!
Pioneer cannot guarantee compatibility with  
all USB mass storage devices and assumes  
no responsibility for any loss of data on media  
players, smart phones, or other devices while  
using this product.  
Russian text to be displayed on this unit should be en-  
coded in one of the following character sets:  
!
!
Unicode (UTF-8, UTF-16)  
A character set other than Unicode that is used in  
a Windows environment and is set to Russian in  
the multi-language setting  
Do not leave discs or a USB storage device in  
any place that is subject to high  
temperatures.  
This unit may not operate correctly depending on the  
application used to encode WMA files.  
There may be a slight delay at the start of playback of  
audio files embedded with image data or audio files  
stored on a USB storage device that has numerous  
folder hierarchies.  
iPod compatibility  
This unit supports only the following iPod models.  
Supported iPod software versions are shown below.  
Older versions may not be supported.  
Made for  
Disc  
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
iPhone 4 (software version 4.1)  
iPhone 3GS (software version 3.0.1)  
iPhone 3G (software version 2.0)  
iPhone (software version 1.1.1)  
Playable folder hierarchy: up to eight tiers (A practical  
hierarchy is less than two tiers).  
Playable folders: up to 99  
iPod nano 6th generation (software version 1.0)  
iPod nano 5th generation (software version 1.0.1)  
iPod nano 4th generation (software version 1.0)  
iPod nano 3rd generation (software version 1.0)  
iPod nano 2nd generation (software version 1.1.2)  
iPod nano 1st generation (software version 1.2.0)  
iPod touch 4th generation (software version 4.1)  
iPod touch 3rd generation (software version 3.1.1)  
iPod touch 2nd generation (software version 2.1.1)  
iPod touch 1st generation (software version 1.1)  
iPod classic (software version 1.0)  
Playable files: up to 999  
File system: ISO 9660 Level 1 and 2, Romeo, Joliet  
Multi-session playback: Compatible  
Packet write data transfer: Not compatible  
Regardless of the length of blank sections between  
the songs from the original recording, compressed  
audio discs play with a short pause between songs.  
Depending on the generation or version of the iPod,  
some functions may not be available.  
24  
En  
Appendix  
Additional information  
2 Put those files into a folder.  
3 Save the folder containing files on the USB  
storage device.  
However, depending on the system environ-  
ment, you may not be able to specify the play-  
back sequence.  
For USB portable audio players, the sequence  
is different and depends on the player.  
Operations may vary depending on the software ver-  
sion of iPod.  
When using an iPod, an iPod Dock Connector to USB  
Cable is required.  
A Pioneer CD-IU51 interface cable is also available.  
For details, consult your dealer.  
About the file/format compatibility, refer to the iPod  
manuals.  
Audiobook, Podcast: Compatible  
Bluetooth profiles  
In order to use Bluetooth wireless technology,  
devices must be able to interpret certain pro-  
files. This unit is compatible with the following  
profiles.  
CAUTION  
Pioneer accepts no responsibility for data lost on  
the iPod, even if that data is lost while this unit is  
used.  
!
!
!
!
!
!
!
GAP (Generic Access Profile)  
SDP (Service Discovery Protocol)  
OPP (Object Push Profile)  
HFP (Hands Free Profile)  
HSP (Head Set Profile)  
PBAP (Phone Book Access Profile)  
A2DP (Advanced Audio Distribution Pro-  
file)  
Sequence of audio files  
The user cannot assign folder numbers and  
specify playback sequences with this unit.  
Example of a hierarchy  
01  
02  
!
!
AVP (Audio/Video Profile)  
AVRCP (Audio/Video Remote Control Pro-  
file) 1.0  
03  
: Folder  
: Compressed  
audio file  
04  
Copyright and trademark  
Bluetooth  
01 to 05: Folder  
number  
1 to 6: Playback  
sequence  
05  
The Bluetoothâ word mark and logos are regis-  
tered trademarks owned by Bluetooth SIG, Inc.  
and any use of such marks by Pioneer  
Corporation is under license. Other trade-  
marks and trade names are those of their re-  
spective owners.  
Level 1 Level 2 Level 3 Level 4  
Disc  
Folder selection sequence or other operation  
may differ depending on the encoding or writ-  
ing software.  
iTunes  
USB storage device  
Apple and iTunes are trademarks of Apple  
Inc., registered in the U.S. and other coun-  
tries.  
Playback sequence is the same as recorded  
sequence in the USB storage device.  
To specify the playback sequence, the follow-  
ing method is recommended.  
1 Create a file name that includes numbers that  
specify the playback sequence (e.g., 001xxx.  
mp3 and 099yyy.mp3).  
25  
En  
Appendix  
Additional information  
MP3  
Specifications  
General  
Power source ............................. 14.4 V DC (10.8 V to 15.1 V  
allowable)  
Grounding system ................... Negative type  
Maximum current consumption  
..................................................... 10.0 A  
Dimensions (W × H × D):  
DIN  
Supply of this product only conveys a license  
for private, non-commercial use and does not  
convey a license nor imply any right to use  
this product in any commercial (i.e. revenue-  
generating) real time broadcasting (terrestrial,  
satellite, cable and/or any other media), broad-  
casting/streaming via internet, intranets and/  
or other networks or in other electronic con-  
tent distribution systems, such as pay-audio or  
audio-on-demand applications. An indepen-  
dent license for such use is required. For de-  
tails, please visit  
Chassis ..................... 178 mm × 50 mm ×  
165 mm  
Nose ........................... 188 mm × 58 mm × 16 mm  
D
Chassis ..................... 178 mm × 50 mm ×  
165 mm  
Nose ........................... 170 mm × 46 mm × 16 mm  
Weight .......................................... 1.2 kg  
WMA  
Windows Media is either a registered trade-  
mark or trademark of Microsoft Corporation in  
the United States and/or other countries.  
This product includes technology owned by  
Microsoft Corporation and cannot be used or  
distributed without a license from Microsoft  
Licensing, Inc.  
Audio  
Maximum power output ....... 50 W × 4  
70 W × 1/2 W (for subwoo-  
fer)  
Continuous power output ... 22 W × 4 (50 Hz to  
15 000 Hz, 5 % THD,  
4 W load, both channels dri-  
ven)  
Load impedance ...................... 4 W (4 W to 8 W allowable)  
Preout maximum output level  
..................................................... 2.0 V  
Tone controls:  
iPod & iPhone  
iPhone, iPod, iPod classic, iPod nano, and  
iPod touch are trademarks of Apple Inc., regis-  
tered in the U.S. and other countries.  
Bass  
Made for iPodand Made for iPhonemean  
that an electronic accessory has been de-  
signed to connect specifically to iPod or  
iPhone, respectively, and has been certified by  
the developer to meet Apple performance  
standards. Apple is not responsible for the op-  
eration of this device or its compliance with  
safety and regulatory standards. Please note  
that the use of this accessory with iPod or  
iPhone may affect wireless performance.  
Frequency ................ 100 Hz  
Gain ............................ 12 dB  
Mid  
Frequency ................ 1 kHz  
Gain ............................ 12 dB  
Treble  
Frequency ................ 10 kHz  
Gain ............................ 12 dB  
Subwoofer (mono):  
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/  
125 Hz  
Slope .................................... 18 dB/oct  
Gain ...................................... +6 dB to 24 dB  
Phase .................................. Normal/Reverse  
CD player  
System .......................................... Compact disc audio system  
Usable discs .............................. Compact disc  
Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-  
work)  
Number of channels .............. 2 (stereo)  
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3  
26  
En  
Appendix  
Additional information  
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12  
(2 ch audio)  
(Windows Media Player)  
WAV signal format .................. Linear PCM & MS ADPCM  
(Non-compressed)  
USB  
USB standard specification  
..................................................... USB 2.0 full speed  
Maximum current supply .... 1 A  
USB Class ................................... MSC (Mass Storage Class)  
File system .................................. FAT12, FAT16, FAT32  
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3  
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12  
(2 ch audio)  
(Windows Media Player)  
WAV signal format .................. Linear PCM & MS ADPCM  
(Non-compressed)  
FM tuner  
Frequency range ...................... 87.5 MHz to 108.0 MHz  
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,  
S/N: 30 dB)  
Signal-to-noise ratio ............... 72 dB (IEC-A network)  
MW tuner  
Frequency range ...................... 531 kHz to 1 602 kHz  
Usable sensitivity ..................... 25 µV (S/N: 20 dB)  
Signal-to-noise ratio ............... 62 dB (IEC-A network)  
LW tuner  
Frequency range ...................... 153 kHz to 281 kHz  
Usable sensitivity ..................... 28 µV (S/N: 20 dB)  
Signal-to-noise ratio ............... 62 dB (IEC-A network)  
Bluetooth  
Version .......................................... Bluetooth 3.0 certified  
Output power ............................ +4 dBm Maximum  
(Power class 2)  
Note  
Specifications and the design are subject to mod-  
ifications without notice.  
27  
En  
PIONEER CORPORATION  
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,  
Kanagawa 212-0031, JAPAN  
PIONEER ELECTRONICS (USA) INC.  
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.  
TEL: (800) 421-1404  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique  
TEL: (0) 3/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936  
TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
5 Arco Lane, Heatherton, Victoria, 3202 Australia  
TEL: (03) 9586-6300  
PIONEER ELECTRONICS OF CANADA, INC.  
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada  
TEL: 1-877-283-5901  
TEL: 905-479-4411  
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.  
Blvd.Manuel Avila Camacho 138 10 piso  
Col.Lomas de Chapultepec, Mexico, D.F. 11000  
TEL: 55-9178-4270  
 
台北4078  
(02) 2657-3588  
司  
9095樓  
(0852) 2848-6488  
ã 2011 PIONEER CORPORATION. All  
rights reserved.  
<KKMZX> <11I00000>  
<QRB3179-C> EW  

Rockford Fosgate RFB2102 User Manual
RayTek ThermoView Ti30 User Manual
Planar Systems Car Video System PT1975R User Manual
Pioneer Speaker S 31 LR QL User Manual
Pioneer CD Receiver with Mixtrax DEH X56HD User Manual
Panasonic SDR SW21P User Manual
Panasonic Camera Lens H FS14140 User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Car Amplifier MR J3 T User Manual
KitchenAid KUWS24LS User Manual
JVC KA 551 User Manual