BUT sFreeerstyGle u33i5de
This User Guide provides you with all the
information you need to get the most
from your phone.
Got everything?
• BT Freestyle 335 handset
• BT Freestyle 335 answering
machine base
• 2 x NiMH AAA rechargeable batteries
(already fitted)
You must first set up your phone before
you can use it. This doesn’t take long as it
is easy to do. Just follow the simple
instructions on the next few pages.
• Battery compartment cover
• Mains power adaptor
(item code 042168)
• Telephone line cord
Need help?
If you have purchased a BT Freestyle
335 multiple pack you will also have
the following for each handset:
If you have any problems setting up or using your BT Freestyle
335, contact the Helpline on Freephone 0800 218 2182 or
email [email protected]
• BT Freestyle 335 handset
• BT Freestyle 335 charger
• Battery compartment cover
Hearing aid?
Please note that the BT Freestyle 335 works by sending radio
signals between the base and handset. These signals may
interfere with some hearing aids, causing a humming noise.
• 2 x AAA NiMH rechargeable batteries
(already fitted)
• Mains power adaptor for the charger
(item code 042169)
4
In this guide
Getting started
To copy a redial number to the directory . . . 21
To delete a number from the redial list. . . . . 22
To delete the entire redial list . . . . . . . . . . . . 22
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Ringer volume on/off . . . . . . . . . . . . . . . . . . 23
Page the handset(s) . . . . . . . . . . . . . . . . . . . . 23
Making internal calls . . . . . . . . . . . . . . . . . . . 24
Receiving internal calls . . . . . . . . . . . . . . . . . 24
Transferring calls. . . . . . . . . . . . . . . . . . . . . . . 24
3-Way conference calls . . . . . . . . . . . . . . . . . 25
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting up. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Set the date and time format . . . . . . . . . . . . 8
Set the date and time . . . . . . . . . . . . . . . . . . 9
Setting up the charger. . . . . . . . . . . . . . . . . . 10
Getting to know your phone
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Handset display icons . . . . . . . . . . . . . . . . . . 12
Base & Charger. . . . . . . . . . . . . . . . . . . . . . . . 13
Navigating the menus . . . . . . . . . . . . . . . . . . 14
Handset menu map . . . . . . . . . . . . . . . . . . . . 15
Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Default settings table. . . . . . . . . . . . . . . . . . . 17
Directory
Store a number. . . . . . . . . . . . . . . . . . . . . . . . 26
Entering names . . . . . . . . . . . . . . . . . . . . . . . 26
Dial/view a number . . . . . . . . . . . . . . . . . . . . 27
Edit a directory entry . . . . . . . . . . . . . . . . . . . 27
Delete a directory entry. . . . . . . . . . . . . . . . . 28
Delete all directory entries . . . . . . . . . . . . . . 28
Directory capacity . . . . . . . . . . . . . . . . . . . . . 29
Using the phone
Switch the handset on/off. . . . . . . . . . . . . . . 18
Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Preparatory dialling . . . . . . . . . . . . . . . . . . . . 18
End a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Receiving calls . . . . . . . . . . . . . . . . . . . . . . . . 18
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Make a call in handsfree . . . . . . . . . . . . . . . . 19
Answer a call in handsfree. . . . . . . . . . . . . . . 20
Switch to handsfree during a call . . . . . . . . . 20
Secrecy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Handset settings
Ringer melody . . . . . . . . . . . . . . . . . . . . . . . . 30
Ringer volume . . . . . . . . . . . . . . . . . . . . . . . . 30
Handset tones on/off. . . . . . . . . . . . . . . . . . . 31
Handset name . . . . . . . . . . . . . . . . . . . . . . . . 32
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Registering handsets . . . . . . . . . . . . . . . . . . . 33
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . 34
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
In this guide
5
Base settings
Memory full . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Answer delay . . . . . . . . . . . . . . . . . . . . . . . . . 48
Remote access . . . . . . . . . . . . . . . . . . . . . . . . 49
Change security PIN code . . . . . . . . . . . . . . . 49
Switch answering machine on. . . . . . . . . . . . 49
Check for messages . . . . . . . . . . . . . . . . . . . . 50
Remote access commands. . . . . . . . . . . . . . . 50
Change PIN code . . . . . . . . . . . . . . . . . . . . . . 35
Dial mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Ringer melody . . . . . . . . . . . . . . . . . . . . . . . . 36
Ringer volume . . . . . . . . . . . . . . . . . . . . . . . . 37
Delete handset . . . . . . . . . . . . . . . . . . . . . . . . 37
Caller Display
Calls list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
View/dial a number . . . . . . . . . . . . . . . . . . . . 38
To copy a Calls list number to the directory . 39
Delete a number. . . . . . . . . . . . . . . . . . . . . . . 39
Delete the entire Calls list . . . . . . . . . . . . . . . 40
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
General information
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Environmental . . . . . . . . . . . . . . . . . . . . . . . . 53
Product disposal instructions . . . . . . . . . . . . 54
Switchboard compatibility. . . . . . . . . . . . . . . 54
Dialling mode . . . . . . . . . . . . . . . . . . . . . . . . . 54
Recall (R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
How many telephones can you have? . . . . . 56
R&TTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Answering machine
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . 41
Outgoing messages . . . . . . . . . . . . . . . . . . . . 42
Answer and Record . . . . . . . . . . . . . . . . . . . . 42
Answer only . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Select answer mode. . . . . . . . . . . . . . . . . . . . 43
Record your own outgoing message . . . . . . 43
Play/check outgoing message. . . . . . . . . . . . 44
Reinstate pre-recorded outgoing messages 44
Playing messages . . . . . . . . . . . . . . . . . . . . . . 45
Adjust volume for message playback . . . . . . 46
Delete all old messages . . . . . . . . . . . . . . . . . 46
To record a memo. . . . . . . . . . . . . . . . . . . . . . 46
To playback a memo. . . . . . . . . . . . . . . . . . . . 47
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
6
Getting started
WARNING
Do not place your BT Freestyle 335 in
the bathroom or other humid areas.
Location
You need to place your BT Freestyle 335 base within 2 metres
of a mains power and telephone socket so that the cables
will reach.
Handset range
The BT Freestyle 335 has a range of
300 metres outdoors when there is a
clear line of sight between the base
and the handset. Any obstruction
between the base and handset will
reduce the range significantly. With
the base indoors and handset either
indoors or outdoors, the range will
normally be up to 50 metres. Thick
stone walls can severely affect the
range.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Freestyle 335 works by sending radio signals between
the handset and base. The strength of the signal depends on
where you site the base. Putting it as high as possible ensures
the best signal.
Signal strength
Setting up
The
indicates when you are in range. When
you are out of range, the symbol
symbol on your handset screen
1. Plug the mains power cable into the power socket on the back
of the base and secure the cable behind the retaining clip.
Plug the other end into the mains socket and switch on.
flashes, and the screen displays
Searching. You should move closer to
the base if this happens to ensure the
full functionality of your phone.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base station must be plugged into
the mains power at all times.
Mains power cable
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting started
7
Which socket?
2. Batteries will come inserted in the battery compartment.
Pull the plastic tag as instructed to activate the batteries.
Power socket
Telephone line socket
3. Place the handset on the base to charge the batteries for
at least 16 hours.
Talk/Standby time
Under ideal conditions, fully charged
handset batteries should give about 10
hours talk time or 100 hours standby
time on a single charge.
The main handset is pre-registered to the base as Handset 1.
This is shown on the display. When the handset
is fully charged the display shows the
symbol.
Battery low warning
4. After 16 hours, connect the telephone line cord to the base
and plug the other end into the wall socket.
If the
symbol is flashing, you will
need to recharge your handset before
using it.
Battery performance
To keep your batteries in the best
condition, leave the handset off the
base for a few hours at a time (after
the initial 16 hour charge).
New NiMH batteries do not reach full
capacity until they have been in
normal use for several days. Running
the batteries right down at least once
a week will help them last as long
as possible.
Telephone line cord
IMPORTANT
Only use the power supply and
telephone line cord supplied with your
BT Freestyle 335 otherwise the
telephone may not work.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
8
Getting started
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, so reducing the talk/standby
time of the handset. Eventually they
will need to be replaced. New batteries
can be obtained from the BT Freestyle
Helpline 0800 218 2182.
Set the date and time format
1. Press the Left soft key to open the main menu.
2. Press
or
until the display shows HSSETTINGSand
press OKsoft key. DATE&TIMEis displayed, press the OKsoft
key again.
Batteries and handset may become
warm during charging. This is normal.
3. DATEFORMATis displayed, press the OKsoft key and the
Your BT Freestyle 335 uses the
24 hour clock.
current format is displayed. Press
between DD-MM-YYand MM-DD-YY. Press the OKsoft key,
you will hear a confirmation tone.
or
to change
If you have more than one handset
registered to your base, you only need
to set the date and time on one
handset and the other handsets will be
automatically updated.
4. Press
and TIMEFORMATis displayed. Press the OKsoft
or to
key and the current format is displayed. Press
change between 24hr and 12hr. Press the OKsoft key, you
will hear a confirmation tone.
5. Press and hold the soft key to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting started
9
Set the date and time
1. Press the Left soft key to open the main menu.
2. Press
or
until the display shows HSSETTINGSand
press the OKsoft key. DATE&TIMEis displayed, press the OK
soft key again.
3. Press
or
until the display shows SETTIMEand press
the OKsoft key.
4. The current time setting is displayed, enter 2 digits for the hour
and 2 for the minute using the 24hr format (eg for 10.54pm,
press
) and press the OKsoft key, you will
hear a confirmation tone.
5. Press and SETDATEis displayed.
Press the OKsoft key.
6. The current date setting is displayed, enter 2 digits for the day,
2 for the month and 2 for the year using the dd-mm-yy
format (eg for 23rd May 2008 press
) and press the OKsoft key, you will hear a
confirmation tone
7. Press and hold the soft key to return to standby.
Your BT Freestyle 335 is now ready for use.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
10
Getting started
Under no circumstances use non-
rechargeable batteries. Only use
NiMH rechargeable batteries with a
capacity of 600mAh or higher. Using
inappropriate batteries will invalidate
your guarantee and may damage the
telephone.
BT Freestyle 335 multiple pack owners only
Location
You need to place your BT Freestyle 335 charger close enough
to a mains power socket so that the cable will reach.
Setting up the charger
Helpline
If you are having any difficulties
setting up or using your BT Freestyle
335, please call the BT Freestyle
Helpline on 0800 218 2182 or email
1. Plug the power adaptor cable into the underside of the
charger, plug the other end into the mains wall socket and
switch the power on.
Mains power cable
2. Batteries will come inserted in the battery compartment.
Pull the plastic tag as instructed to activate the batteries.
3. Place the handset on the charger and charge for at least
16 hours.
Your BT Freestyle 335 multiple pack is now ready for use.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting to know your phone
11
Handset
Display
With amber backlight.
Right soft key
Use with icons displayed above the key.
End call
Up/Calls list
Press to display the Calls list, page 38,
and to move up menu options.
Press to end the call in progress, page 18.
Press and hold to turn the handset off,
page 18.
Use to increase the volume.
2
Press to play and stop playback.
Left soft key
Use with icons displayed above the key.
5
Press to delete the message.
Talk
Press to make and receive phone calls,
page 18.
6
Press to skip to the next message.
Down/Redial list
0
Press to display the Redial list, page 21
and to move down menu options.
Press to insert a Pause in the number to be
dialled, page 26.
Use to decrease the volume.
#/
4
Press to replay the message
or skip to the previous message.
Press and hold to turn the
ringer on/off, page 23.
Recall
/
Used when connected to a switchboard/PBX,
and with some BT Calling Features.
*
Press and hold to lock/unlock the keypad,
page 23.
Handsfree
Press to activate handsfree
(loudspeaker) mode, page 19.
Press to open the directory, page 26.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
12
Getting to know your phone
Handset display icons
These are the symbols you will see on your handset’s display.
Battery
Answer machine
Skip forward/backward
On – answer machine on
Flashing – new message received
On – battery full
Use when playing messages to
skip to previous/next message
On – battery needs charging
Flashing – low battery
Flashing – charging
Alarm
New call
On – alarm set
Flashing – alarm time reached
Indicates a new call in the calls list
Handset
On – handset in use
Flashing – incoming call
Keypad lock
Keypad lock on
Clear
Mute/unmute a call.
Clears characters when in
entry screen.
Ringer
Ringer turned off
Internal (top row)
On – internal
call connected
Flashing – incoming internal
call from another handset
Stops the alarm
Antenna
On – in range
Flashing – edge of range
Back
Return to previous menu
Int (bottom row)
Make an internal call
OK
Left/right
Confirm menu selection
Characters off the display
to the left/right
Handsfree
Handsfree on
Menu
Open the main menu
Up/down
Menu options exist above/below
those shown on the display
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting to know your phone
13
Base
Find
Press to page/locate a handset,
see page 23.
Charger
(For multiple pack users only)
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
14
Getting to know your phone
Navigating the menus
Your BT Freestyle 335 handset features an easy to use menu
system. Have a look at the menu map on the next page.
When the handset is switched on and in standby:
1. Press the Left soft key
to open the main menu and select
or button.
the function you want by pressing the
Left soft key
Right soft key
Up and Down keys
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting to know your phone
15
Handset menu map
Ans Machine
Calls List
Directory
BS Settings
HS Settings
Registration
Reset
Play Message
Store Number
Add
Base Ringer
Date & Time
Delete All
Memo
Delete
View
Ring Volume
Delete HS
Alarm
Delete All
Details
Edit
Ringer
Ans On/Off
Ans Settings
Delete
Delete All
Capacity
Dial Mode
Change PIN
Tones
HS Name
Display
Auto Answer
Menu navigation
Press or
Press Left soft key OKto select an option.
to scroll through the menu options.
Press Right soft key to go back to the previous display screen.
Press and hold Right soft key to return to the standby display screen.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
16
Getting to know your phone
The default PIN setting is 0000.
Default
You can reset your BT Freestyle 335 back to the default settings.
This will not delete your directory entries.
1. Press the Left soft key
to open the main menu.
2. Press or until the display shows RESETand press OK.
3. PIN?Is displayed, enter the PIN and press OK.
4. CONFIRM?is displayed, press OK.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Getting to know your phone
17
Default settings table
Handset
Default Value
Empty
Empty
Melody 1
Melody 3
Volume 5
Volume 4
Volume 4
HANDSET
ON
Base
Default Value
0000
Redial List
System PIN (4-digit)
Base Ringer
Ringer Volume
Dial Mode
Call List
Melody 2
Volume 3
Tone
External Ringer Melody
Internal Ringer Melody
Ringer Volume
Earpiece Volume
Speaker Volume
Handset Name
Key Tone
Answer Machine
Default Value
Answer Machine ON/OFF
Answer Mode
OGM
ON
ANS & REC
Default OGM
6 Rings
180 SEC
ON
Answer Delay
Record Time
Low Battery Tone
Out of Range Tone
Ringer On/Off
Auto Answer On/Off
Date Format
Date
ON
ON
BS Screening
Remote Access
ON
ON
ON
Remote Access PIN
(4-digit)
0000
DD/MM/YY
01/01/08
24 hr
Time Format
Time
00:00
Alarm
OFF
Key Lock
OFF
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
18
Using the phone
Call timer
Switch the handset on/off
Your handset automatically displays
the duration of every external call.
The call time will remain on the
display until 2 seconds after the call
has ended.
1. Press and hold
to switch the handset on and off.
Make a call
1. Press
.
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on
the display before you dial out. The display can only show 12
digits at a time, if you enter a number with more than 12
digits, will be displayed to the left of the number to indicate
more digits.
Press Right soft key Cto delete an
incorrect digit.
If you have subscribed to a Caller
Display service, your caller’s number
will also be shown. If the number is
withheld the display will show
1. Enter the number first then press
or
to dial.
End a call
WITHHELD. If an exact number match is
found in the Directory, the name will
be displayed instead of the number.
See page 38 for more information.
1. Press
or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will ring and
the icon will flash. If the ringer is set to off, the phone will
not ring but you will hear one short beep tone to alert you.
Internal calls
When you receive an internal call, the
calling handset number will be shown
on the handset display.
1. If the handset is not in the base/charger, press
to answer the call.
or
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Using the phone
19
If two handsets are engaged on an
internal call and an external incoming
call is received, beeps will be emitted
at both internal handsets. The internal
call has to be ended before the
2. To turn the ringer off when receiving a call press the Right soft
key C. The display will briefly show VOLUMEOFF.
Or
external call can be answered.
If the handset is on the base/charger, lift the handset to
answer the call.
Volume
The earpiece volume can only be
changed when you are on a call.
Adjust the volume during a call:
To increase the volume
Press
.
To decrease the volume
Press
.
Handsfree
Handsfree
Handsfree lets you talk to your caller
without holding the handset. It also
enables other people in the room to
listen to your conversation over
the loudspeaker.
Make a call in handsfree
1. Dial the number then press
.
2. Press
to end the call.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
20
Using the phone
Answer a call in handsfree
When the phone rings:
1. Press
and the call is transferred to the loudspeaker.
Switch to handsfree during a call
During a call:
1. Press
the call is transferred to the loudspeaker.
to toggle between Handsfree and the handset.
to end the call.
2. Press
3. Press
Secrecy
During a call, you can talk to someone nearby without your
caller hearing.
1. Press Right soft key C. The display shows MUTEand your caller
cannot hear you.
2. Press Right soft key Cagain to return to your caller.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Using the phone
21
If a redial number is stored in the
Directory, the caller’s name will be
displayed instead of the number.
Redial
Your BT Freestyle 335 stores the details of the last 5 calls
made into a redial list. Stored redial numbers can be up to
20 digits long.
If there are no redial numbers stored,
LISTEMPTYwill be displayed.
If you dial the same number on more
than one occasion, only the most
recent call details will be stored, any
previous occurrence will be deleted.
1. Press
to display the Redial list.
or to select any of the last 5 numbers called.
or to dial the number displayed.
2. Press
3. Press
To copy a redial number to the directory
1. Press to display the Redial list.
2. Press or to display the number you want and press
Left soft key to select.
3. STORENUMBERis displayed, press Left soft key OKto select.
4. NAMEis displayed. Enter a name using the keypad and press
Left soft key OKto confirm.
5. The number is displayed, press Left soft key OKto confirm.
6. Press
or
to select a ringtone to associate with the
For help with entering names see
page 26.
name/number and press Left soft key OKto confirm.
7. Press Right soft key to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
22
Using the phone
To delete a number from the redial list
1. Press to display the Redial list.
2. Press or to display the number to be deleted and
press Left soft key
.
3. Press
or
to display DELETEand press Left soft key
OKto select.
4. Press Right soft key to return to standby.
To delete the entire redial list
1. Press
to display the Redial list.
2. With any of the redial numbers displayed, press Left soft
key
.
3. Press
or
to display DELETEALLand press Left soft
key OKto select.
4. CONFIRM?is displayed, press Left soft key OKagain
to confirm.
5. LIST EMPTYis displayed. Press Right soft key to return to
standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Using the phone
23
Keypad lock
When the keypad is locked incoming
calls can still be answered. Once the
call has ended, the keypad lock is
re-activated.
You can lock the keypad to prevent accidentally dialling
numbers while carrying the handset around.
1. Press and hold
is displayed.
for 1.5 seconds until the
icon
IMPORTANT
Emergency calls CANNOT be made
when the keypad lock is on.
2. To unlock the keypad, press and hold
again.
Ringer volume on/off
1. Press and hold
for 1.5 seconds to switch the ringer on or off.
If you switch the ringer off, the
icon will be displayed.
Page the handset(s)
You can alert handset users that they are wanted or locate a
missing handset.
You cannot answer the beeping
handset as you would a call.
1. Press
on the base. The handset(s) will beep and
display PAGING.
Stopping the beep at a handset stops
the beep at that handset only.
2. Press on the base again or press
stop the handset beeping.
on the handset to
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
24
Using the phone
Making internal calls
If you only have two handsets you
do not need to enter the handset
number to call.
If you purchased a BT Freestyle 335 multi-pack, you can make
internal calls between handsets.
1. Press the Right soft key
and enter the number of the
handset you want to call. The other handset will ring and
display your handset number to let the handset user know
who is calling. When the other handset answers hold your
conversation as normal.
2. Press
to end the call.
Receiving internal calls
When you receive an internal call, the calling handset number
will be shown on the handset display.
If two handsets are engaged on an
internal call and an external incoming
call is received, beeps will be emitted
at both internal handsets. The internal
call has to be ended before the
1. Press
or
to answer the call,
external call can be answered.
Transferring calls
If using a BT Freestyle 335 multi-pack, you can transfer an
external call to the other handset.
1. During an external call, press Left soft key
.
2. INTERNALwill appear in the display, press the Left soft key OK
to confirm.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Using the phone
25
If you only have two handsets you
do not need to enter the handset
number to call.
3. Enter the number of the handset you want to call. The other
handset will ring and display your handset number to let the
handset user know who is calling. The external caller will be
put on hold.
4. When the other handset answers, press
to transfer the call.
3-Way conference calls
If using a BT Freestyle 335 multi-pack, you can hold a
3-way conference call with an external caller and the
other internal handset.
1. During an external call, press the Left soft key
and
the display will show INTERNAL. Press the Left soft key OK
to confirm.
If you only have two handsets you
do not need to enter the handset
number to call.
2. Enter the number of the other handset you wish to join the
call. The other handset will ring.
3. The other handset answers the call by pressing
.
4. Press and hold the key for 2 seconds, the display shows
CONFERENCE. The external call, and the two internal handsets
are all connected to the conference.
5. Any caller can leave the conference by pressing
.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
26
Directory
If there are no stored entries, LIST
EMPTYwill be displayed.
You can store up to 20 names and numbers in the directory of
each of your BT Freestyle 335 handsets for quick and easy
dialling. Numbers can be up to 20 digits long. Directory
entries are stored alphabetically.
If you try to store a new entry and the
directory is full, you will hear an error
tone and FULLwill be displayed.
If the number you store has more than
11 digits, the display shows to the
left of the number to indicate more
digits ahead.
Store a number
1. Press
to open the directory. The first entry is displayed.
2. Press Left soft key , ADDis displayed, press OKto select.
Insert a pause in a number
You may need to do this if you are
connected to a switchboard. When
entering a number, usually after
entering the switchboard access code
3. NAMEis displayed, enter the name for the entry using the
keypad and press OKto store.
4. NUMBERis displayed, enter the number for the entry using the
(e.g. 9) press and hold
appears in the display.
until P
keypad and press OKto save.
Writing tips
5. Press
or
to select a ringtone to associate with the
If you make a mistake, press
Right soft key Cto delete the last
character or digit.
name/number and press Left soft key OKto confirm.
6. Press Right soft key to return to standby.
Press
repeatedly to enter the
following: SPACE – 1
Entering names
Press * repeatedly to enter the
following symbols: * ? / \ ( )
Use the keypad to enter the letters shown on the buttons,
e.g. to store DAN:
Press
repeatedly to enter the
following symbols: # ' , - . &
1. Press
2. Press
3. Press
once to enter D.
once to enter A.
twice to enter N.
If the next letter is on the same button
that you have just pressed, wait until
the cursor moves to the right before
trying to enter it.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Directory
27
Dial/view a number
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
Searching for a name
Example: To search for Jaime, press
once to display the first entry
beginning with J, then use
to scroll to Jaime.
and
Or, search alphabetically, using the keypad to enter the first
letter of the name you want, then scroll to the exact entry
using the
or
buttons.
3. Press Left soft key , then
to display VIEWand press OK
to confirm.
4. The selected entry will be displayed ready to be dialled out.
Press or to dial.
Edit a directory entry
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
3. Press Left soft key , then
or
to display EDITand
press OKto select.
See page 26 for help with
entering names.
4. The stored name is displayed followed by a flashing cursor. Edit
the name using the Right soft key Cto delete incorrect
characters and enter new ones using the keypad, then press OK.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
28
Directory
5. The number is displayed followed by a flashing cursor. Edit the
number using the Right soft key Cto delete incorrect digits
and enter new ones using the keypad, then press OKto save.
6. The current ringtone is played and displayed. Use
or
to choose a new ringtone if required and press OK.
7. Press to return to standby mode.
If you have purchased a BT Freestyle
335 multiple pack, entries are only
deleted on the handset you are using.
Delete a directory entry
1. Press
2. Press
to open the directory. The first entry is displayed.
or to scroll through the directory to the entry
you want.
3. Press Left soft key
then
or
to display DELETEand
press OKto select.
4. Press to return to standby mode.
Delete all directory entries
1. Press
to open the directory. The first entry is displayed.
2. Press the Left soft key
then
or
to display DELETE
ALL.
3. Press OKand CONFIRM?is displayed. Press OKand LIST
EMPTYis displayed.
4. Press to return to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Directory
29
Directory capacity
1. Press to open the directory. The first entry is displayed.
2. Press the Left soft key then to display CAPACITY.
3. Press OKand the number of entries used out of 20
is displayed.
4. Press to return to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
30
Handset settings
Ringer melody
There are 10 different ringer melodies to choose from for both
internal and external calls.
1. Press the Left soft key
to open the main menu.
2. Press
or
until the display shows HS SETTINGS
and press OK.
3. Press
4. Press
press OK.
5. The current ringtone is played, use
or
until RINGERis displayed and press OK.
or
to select INTRINGor EXTRINGand
or
to listen to the
alternatives and press OKto confirm your choice.
6. Press and hold to return to standby.
Ringer volume
You can also turn the ringer off by
pressing, and holding, the key.
There are 5 volume levels and Ringer Off to choose from.
1. Press the Left soft key
to open the main menu.
2. Press
press OK.
or
until the display shows HS SETTINGSand
3. Press
4. Press
or
or
until RINGERis displayed, press OKto select.
until RINGVOLUMEis displayed, press OK
to select.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Handset settings
31
5. The current ringtone is played at the current volume setting.
Press or to listen to new volume levels or off, press
OKto store.
6. Press and hold to return to standby.
Handset tones on/off
Your BT Freestyle 335 has a series of tones designed to alert
you to certain situations. A tone will sound: when the battery
is low; when you move out of range of the base and there is
no coverage; to confirm each button press (key beeps). You
can switch the handset tones on or off.
1. Press the Left soft key
to open the main menu.
2. Press
or
until the display shows HSSETTINGS
and press OK.
3. Press
4. Press
to select.
5. Press
or
or
until TONESis displayed, press OKto select.
to select the tone you want and press OK
or
to display either ONor OFFand press OK
to confirm.
6. You hear a confirmation tone.
7. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
32
Handset settings
Handset name
You can give each handset a name up to a maximum of
11 characters, for example KITCHEN. It will still display
its number.
1. Press the Left soft key
to open the main menu.
2. Press
press OK.
or
until the display shows HSSETTINGSand
3. Press
to select.
or
until HSNAMEis displayed, press OK
4. Press Cto delete characters and use the keypad to enter the
name you want, then press OKto confirm.
5. Press and hold to return to standby.
Display
You can choose to display the handset name or the time in the
standby screen.
1. Press the Left soft key
to open the main menu.
2. Press
press OK.
or
until the display shows HSSETTINGSand
3. Press
to select.
or
until DISPLAYis displayed, press OK
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Handset settings
33
4. Press
or
to select TIMEor HANDSETNAME, then press
OKto confirm.
5. Press and hold to return to standby.
Registering handsets
If you have purchased a multi pack, the handsets in these
packs are already pre-registered to the main base.
1. Press the Left soft key
then
or
until
REGISTRATIONis displayed, then press OK.
2. PIN?is displayed. Enter the base PIN (original setting 0000)
and press OK.
3. The handset will display SEARCHING, press and hold the
button on the base.
5. The handset will temporarily display REGISTEREDthen will
display HANDSETand will be automatically assigned the next
handset number.
Alarm
1. Press the Left soft key
2. Press or until the display shows HSSETTINGSand
press OK.
to open the main menu.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
34
Handset settings
Use any key to disable the alarm when
it is activated. If SNOOZEhas been
turned on pressing any key will turn
the alarm off for 7 minutes.
3. Press
4. Press
until ALARMis displayed and press OKto select.
or to select ONor OFFand press OK.
5. If you select ONyou should now enter the time in 24hr format,
i.e. for 07.30am enter , and press OK.
6. SNOOZEis now displayed. If you want to change your snooze
selection, press OKthen select ONor OFFusing
or
and press OKto confirm.
7. Press and hold to return to standby.
Auto answer
If auto answer is on you can answer a call by taking the
handset out of the base, you do not have to push the
button or
to take the call.
1. Press the Left soft key
to open the main menu.
2. Press
press OK.
or
or
or
until the display shows HSSETTINGSand
until AUTOANSWERis displayed and
to select ONor OFFand press OK.
3. Press
press OK.
4. Press
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Base settings
35
The default PIN setting is 0000.
Change PIN code
If you change your PIN, keep a note of
the new number by writing it in the
space provided on page 55.
Your System PIN can help prevent unauthorised users from
changing the settings on your phone.
1. Press the Left soft key
to open the main menu.
2. Press
or
until the display shows BSSETTINGS
and press OK.
3. Press or
until CHANGEPINis displayed, press OKto
select. ENTERPIN?is displayed.
4. Enter the existing PIN code using the keypad and press OK.
NEWPIN?is displayed.
5. Enter a new 4 digit PIN code using the keypad and press OK.
CONFIRM?is displayed.
6. Re-enter the new PIN code and press OK. You hear a
confirmation tone.
7. Press and hold to return to standby.
Dial mode
Tone is the default setting for
the UK. You should only have
to change this if connected to
a switchboard that requires
Pulse dialling.
Your BT Freestyle 335 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.
1. Press the Left soft key
to open the main menu.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
36
Base settings
2. Press
or
until the display shows BS SETTINGS
until the display shows DIALMODEand
to display either TONEor PULSEand press
and press OK.
3. Press
or
press OKto select.
4. Press
or
OK. You hear a confirmation tone.
5. Press and hold to return to standby.
Ringer melody
There are 5 different ringer melodies to choose from.
1. Press the Left soft key
2. Press or until the display shows BSSETTINGSand
press OK.
to open the main menu.
3. BASERINGERis displayed, press OKto select and the current
ringtone is played.
4. Press
or
to listen to the available ringtones and press
OKto select.
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Base settings
37
Ringer volume
There are 5 volume levels and ringer off to choose from.
1. Press the Left soft key
2. Press or until the display shows BSSETTINGSand
press OK.
3. Press
ringtone is played.
4. Press or to listen to the volume settings or VOLUME
to open the main menu.
to display RINGVOLUMEand press OK, the current
OFF, press OKto select.
5. Press and hold to return to standby.
Delete handset
You cannot delete the handset you are
using to carry out this action.
1. Press the Left soft key
to open the main menu.
2. Press
press OK.
or
until the display shows BSSETTINGSand
3. Press
or
to display DELETEHSand press OK.
4. PIN?is displayed, enter the PIN and press OK.
5. Press or to select the handset you wish to delete and
press OK.
6. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
38
Caller Display
IMPORTANT
Caller Display
To use Caller Display you must first
subscribe to your network provider’s
Caller Display service. A quarterly fee
may be payable.
If you subscribe to Caller Display, you can see your caller’s
number (provided it is not withheld) on your handset display
before you answer the call.
For more information on BT Calling
Features, call BT free on 0800 800
150.
If you have stored a name for the calling number in your
handset directory, the name will be displayed instead.
If the caller has withheld their number
the display shows WITHHELD.
If a call is received from an
international number INTERNATIONA
is displayed.
Calls list
When a call is not answered or is picked up by the answering
machine, the display shows NEWCALLSand your caller’s
telephone number will be stored in the Calls list. The Calls list
holds up to 10 missed calls.
When the Calls list is full, the oldest call will be replaced by a
new call, the most recent call will always be at the top of the
list. If a caller rings again their number will move to the top of
the list.
View/dial a number
1. Press
Press
, the most recent missed call is displayed.
If a number is stored in the Directory,
the caller’s name will be displayed
instead of the number.
or
to scroll through the Calls list.
2. Press
or
to dial the number displayed.
If there are no Calls list numbers
stored, LIST EMPTYwill be displayed.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Caller Display
39
To copy a Calls list number to the directory
1. Press to display the Calls list, then press
the entry you want and press to select.
2. STORENUMBERis displayed, press OK.
or
to
3. NAMEis displayed. Enter a name using the keypad and press
OKto confirm.
4. The number is displayed, press OKto confirm.
5. Ringtone MELODY1is played, press
or
to choose a
ringtone to associate with the directory entry. Press OK.
6. Press and hold to return to standby mode.
Delete a number
1. Press
to display the Calls list, then press
to select.
or
to
the entry you want and press
2. Press
to display DELETEand press OKto select.
3. Press and hold to return to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
40
Caller Display
Delete the entire Calls list
1. Press to display the Calls list and press
2. Press or to display DELETEALLand press
OKto select.
.
3. DELETELIST?is displayed, press OKagain to confirm.
4. LISTEMPTYis displayed. Press and hold to return
to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Answering machine
41
Your BT Freestyle 335 can digitally record up to 15 minutes
of messages. Each message can be up to a maximum of 3
minutes long.
You can operate your BT Freestyle 335 from:
the handset
I
remotely from any external Touchtone™ telephone.
I
Your BT Freestyle 335 comes with two pre-recorded
outgoing messages, one for Answer and Record mode
and one for Answer Only mode. You can also record your
own outgoing message.
Your BT Freestyle 335 gives clear voice prompts to help you
when using the answering machine.
Switch on/off
When first connected to the mains power, your BT Freestyle
335 is set to ON and Answer and Record.
When set to on, the
icon is displayed.
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANS ON/OFFis displayed and press
OKto select.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
42
Answering machine
If you have not already set the date
and time, you will need to do this so
that you will know when each message
was received, see pages 8-9.
3. Press
to confirm
or
to select ONor OFF, then press OK
4. Press and hold to return to standby mode.
Call Screening
When a caller is leaving a message
SCREENING?appears on the display.
Outgoing messages
Pressing OKallows you to monitor the
message being left without the caller
hearing you.
This is the message your caller hears when the answering
machine picks up their call. Your BT Freestyle 335 comes with
two pre-recorded outgoing messages to choose from. You can
also record your own outgoing messages.
You can then press to accept the call
or
to stop monitoring.
Answer and Record
This allows your caller to leave a message for you. The pre-
recorded message is “Hello, your call cannot be taken at the
moment, so please leave your message after the tone.”
Answer Only
This does not allow your caller to leave a message.
The pre-recorded message is “Hello, your call cannot be taken
at the moment, and you cannot leave a message, so please
call later.”
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Answering machine
43
Select answer mode
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANSSETTINGSis displayed and press
OKto select.
3. The display shows ANSMODE, press OK.
4. Press or to select ANS&RECor ANSWERONLYand
press OKto confirm.
5. Press and hold to return to standby.
Record your own outgoing message
Your message can be up to 2 minutes
long. It replaces the pre-recorded
outgoing message, but you can
reinstate this later if you wish.
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANSSETTINGSis displayed and press
OKto select.
3. Press
4. Press
to display OUTGOINGMSGand press OK.
or
to select ANS&RECor ANSWERONLYand
press OK.
5. Press
or
to RECORDMSGand press OKto record
your message.
6. The display shows RECORDING, press OKwhen complete and
your message will be played back.
7. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
44
Answering machine
Play/check outgoing message
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANSSETTINGSis displayed and press
OKto select.
3. Press
4. Press
to display OUTGOINGMSGand press OK.
or to select ANS&RECor ANSWERONLYand
press OK.
5. PLAYMESSAGEis displayed, press OKto listen to the message.
The display will show PLAYINGMSG.
6. Press and hold to return to standby.
Reinstate pre-recorded outgoing messages
This means deleting your own
recorded outgoing message.
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANSSETTINGSis displayed and press
OKto select.
3. Press
4. Press
to display OUTGOINGMSGand press OK.
or to select ANS&RECor ANSWERONLYand
press OK.
5. PLAYMESSAGEis displayed, press OKand as soon as the
message starts press C
.
6. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Answering machine
45
Message playback
When you have new messages stored on your BT Freestyle
335 answering machine the
icon will flash in the display.
Playing messages
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. PLAYMESSAGEis displayed, press OKto start playback. The
machine announces, “You have (n) new messages”, and your
new messages are played back.
The machine then announces, “You have (n) old messages”,
and any old messages are played back. New messages will
always be played back first.
During playback, you can choose any of the following options:
Press
to stop playback.
Press
Press
to replay the current message.
again to go to the start of the previous message.
Press
Press
to skip to the next message.
to delete the current message.
3. Press and hold at any time to return to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
46
Answering machine
Adjust volume for message playback
1. During message playback, press
the required level.
or
, until you reach
Delete all old messages
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Scroll
to DELETE ALLand press OK.
3. CONFIRM?appears. Press OKto confirm.
LISTEMPTYis displayed.
4. Press and hold to return to standby mode.
To record a memo
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Scroll
or
to MEMOand press OK.
3. The display shows RECORDINGand you can leave a message.
Press OKwhen you have finished recording the memo.
4. Press and hold to return to standby mode.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Answering machine
47
To playback a memo
A memo is played back as any other recorded message, see
page 45.
Memory full
If the memory becomes full when a caller is leaving a message
the machine announces “Memory full, thank you for calling”
and hangs up.
When the memory is full, your answering machine will
automatically switch to Answer Only mode. You must delete
messages to allow for more messages to be recorded,
see previous page for instructions.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
48
Answering machine
Time Saver
Answer delay
Time Saver can save you the cost of a
call when you want to ring in to find
out if you have new messages.
Answer delay sets the number of times your BT Freestyle 335
will ring before the answering machine picks up your call.
The default setting is 6 rings. You can change this setting to 2,
4 or 8 rings or to time saver mode.
If your answering machine answers
after 2 rings, you have new messages.
If you have no new messages it will
answer after 6 rings.
1. Press the Left soft key , the display shows ANSMACHINE,
So if you hear a third ring, you can
hang up before you are connected,
saving you the cost of a call.
press OK.
2. Press
or
until ANSSETTINGSis displayed and
press OKto select.
3. Press
4. Press
or
or
to display ANSWERDELAYand press OK.
to select 2RINGS, 4RINGS, 6RINGS,
8RINGSor TIMESAVERand press OK.
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Answering machine
49
Keep a note of your remote access
code by writing it in the space
provided on page 55.
Remote access
You can operate your answering machine remotely from any
Touchtone™ phone by calling your BT Freestyle 335 and
entering a 4-digit security code.
The default PIN setting is 0000.
Change security PIN code
1. Press the Left soft key , the display shows ANSMACHINE,
press OK.
2. Press
or
until ANSSETTINGSis displayed and press
OKto select.
3. Press or
to display CHANGEPINand press OK.
4. PIN?is displayed, enter the current PIN and press OK.
5. NEWPIN?is displayed, enter your new PIN and press OK.
Re-enter when the display shows CONFIRM?and press OK.
6. Press and hold to return to standby.
Switch answering machine on
If you forget to switch on your answering machine, you can do
it from another phone.
1. Dial your phone number and after 20 rings your BT Freestyle 335
will answer. When the message starts press
and you will
hear, “Please enter your security code”. Enter your 4-digit code.
2. Press to switch the answer machine on.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
50
Answering machine
If you enter the incorrect PIN code,
you will hear “Incorrect security code”.
You have two chances to enter the
correct remote access security code
before your BT Freestyle 335
hangs up.
Check for messages
1. Dial your phone number. When you hear your outgoing message,
press
. You will hear, “Please enter your security code”.
*
2. Enter your 4-digit code and your machine announces
"You have (n) new messages". The new messages are
then automatically played back to you.
Time saver
If you have set the answer delay to
Time Saver, your answering machine
will answer after 2 rings
if you have new messages. If you do
not have new messages it will answer
after 6 rings. This enables you to hang
up if you hear more than 2 rings
before you are connected, saving you
the cost of a call. See Answer delay,
page 48.
Remote access commands
When you have accessed your answering machine, you
can operate it using the keypad numbers on the phone
you are using.
The commands are:
1
2
4
5
6
7
9
Play remote access menu
Play/Stop all messages
If you do not press any button for
4 seconds, your BT Freestyle 335
hangs up.
Repeat/Skip back to previous message
Delete current message
Skip forward to next message
Turn answer machine on
Turn answer machine off
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Help
51
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or
email [email protected]
Handset not registering?
Is SEARCHINGdisplayed on the handset?
Check that the base is plugged into the mains power and switched on.
Check that there are charged batteries in the handset and that they are fitted correctly.
Forgotten your PIN number
Try entering the default PIN = 0000. If you have changed the number and cannot remember it,
contact the BT Freestyle Helpline on 0800 218 2182 or email [email protected]
No display
Check that the handset batteries are charged and correctly fitted.
If necessary, replace the batteries.
Nothing happens when you press any button
Is the
icon displayed? If so, the key lock is on, press and hold
for 1.5 seconds to
unlock the keypad.
No connection between handset and base
You may be out of range, is the
icon flashing? If so, move closer to the base.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
52
Help
Handset is not charging properly
Make sure the handset is placed properly on the base/charger. When charging, the battery
symbol is shown filling up.
Clean the charging contacts with a soft, slightly damp (not wet) cloth.
Handset does not ring
Check that the batteries are inserted correctly.
Check that the handset ringer has not been switched off, see page 23.
Your caller cannot hear you
Check to see if you have the handset on MUTE. If so, secrecy is switched on. Press the soft key C
to speak to your caller again.
Incoming caller’s number is not displayed even though you have Caller Display
Caller has to allow their number to be sent. It has been withheld or is unavailable.
IMPORTANT
The BT Freestyle 335 cordless telephone is not designed for making emergency telephone calls
when the power fails.
This product is intended for connection to analogue public switched telephone networks and
private switchboards in the United Kingdom.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
General information
Safety information
Only use the power supply supplied with your
BT Freestyle 335. Using an unauthorised power supply
will invalidate your guarantee and may damage
the telephone.
53
Cleaning
Simply clean the handset and base with a damp (not
wet) cloth, or an anti-static wipe. Never use
household polish as this will damage the product.
Never use a dry cloth as this may cause a static shock.
Only use the telephone line cord supplied with your
BT Freestyle 335, otherwise your telephone may not
work correctly.
Environmental
Do not expose to direct sunlight.
The BT Freestyle 335 handset may become warm
when the batteries are being recharged. This is
normal. We recommend that you do not place the
product on antique/veneered wood to avoid damage.
For the handset, use only AAA Nickel Metal Hydride
(NiMH) rechargeable batteries with a minimum
capacity of 600mAh. Never use other batteries or
conventional alkaline batteries as this could lead to a
short circuit or destroy the battery casing.
Do not stand your product on carpets or other
surfaces which generate fibres or place it in locations
preventing the free flow of air over its surfaces.
If the keylock is switched on, it is NOT possible to
make calls, including emergency numbers (999/112).
Do not submerge any part of your product in water
and do not use it in damp or humid conditions, such
as bathrooms.
Do not open the handset (except to replace the
handset batteries). This could expose you to high
voltages or other risks.
Do not expose your product to fire, explosive or other
hazardous conditions.
Radio signals transmitted between the handset and
base may cause interference to hearing aids.
There is a slight chance your phone could be damaged
by an electrical storm.
It is recommended that advice from a qualified expert
be sought before using this product in the vicinity of
emergency/intensive care medical equipment.
We recommend that you unplug the power and
telephone line cord during an electrical storm.
It is recommended that if you have a pacemaker fitted
you check with a medical expert before using this
product.
Never dispose of batteries in a fire. There is a serious
risk of explosion and/or the release of highly toxic
chemicals. Please dispose of batteries as instructed.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
54
General information
Product disposal instructions
Connecting to a switchboard
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed
with other household or commercial waste at the
end of its working life.
Switchboard compatibility
This telephone may be connected to most types of
switchboard, however in the event of any difficulties,
consult your switchboard Service Provider.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landfill.
Dialling mode
Your BT Freestyle 335 is set to DTMF (Tone) dialling.
Some switchboards may require Pulse dialling. To
change the dialling mode, see Dial mode page 34.
Recall (R)
Product disposal instructions for residential users
Recall is used when connected to certain
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For
more information please contact your local authority
or the retailer where the product was purchased.
switchboards/PBXs and some BT Calling Features, or
those services available via your network provider.
Guarantee
Your BT Freestyle 335 is guaranteed for a period of
12 months from the date of purchase. Subject to the
terms listed below, the guarantee will provide for the
repair of, or at BT’s or its agent’s discretion the option
to replace the BT Freestyle 335, or any component
thereof, (other than batteries), which is identified as
faulty or below standard, or as a result of inferior
workmanship or materials. Products over 28 days old
from the date of purchase may be replaced with a
refurbished or repaired product.
Product disposal instructions for business users
Business users should contact their suppliers and
check the terms and conditions of the purchase
contract and ensure that this product is not mixed
with other commercial waste for disposal.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
General information
55
The conditions of this guarantee are:
Returning your phone
The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
If the Helpline is unable to remedy your problem they
will ask you to return the product. Where possible,
pack the product in its original packaging. Please
remember to include all parts, including the line cords,
power supply units and the original batteries. (Please
note that we cannot take responsibility for goods
damaged in transit.) Please obtain and keep proof of
posting from the Post Office, or your preferred carrier.
Proof of purchase is required.
The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
Additional/Replacement Items
For a full range of replacement items for the
BT Freestyle 335 range please call 0800 218 2182.
This guarantee does not affect your statutory rights.
For your records
Date of purchase:
Place of purchase:
Within the 12 month guarantee period:
If you experience difficulty using the product, prior to
returning your product, please read the Help section
beginning on page 51 or contact the BT Freestyle
Helpdesk for assistance on 0800 218 2182 or email
For guarantee purposes, proof of purchase is required,
so please keep your receipt.
In the unlikely event of a defect occurring, please
follow the Helplines’ instructions for replacement
or repair.
Enter your system PIN here:
[ / / / ]
Outside of the 12 month guarantee period:
Enter your security PIN code here:
[ / / / ]
If your product needs repair after the guarantee
period has ended, the repair must meet the approval
requirements for connection to the telephone
network. We suggest that you call our recommended
repair agents on 0870 240 5029.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
56
General information
Additional handsets
Technical information
The BT Freestyle 335 is NOT GAP compatible. You can
only register BT Freestyle 335 handsets to your
BT Freestyle 335 base station.
How many telephones can you have?
All items of equipment have a Ringer Equivalence
Number (REN) which is used to calculate the number
of items that may be connected to any one telephone
line. The BT Freestyle 335 has a total REN of 1, i.e. for
a base and up to 4 handsets. Any other instrument
provided by BT may be assumed to have a REN of 1
unless stated otherwise.
R&TTE
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
A total REN of 4 is allowed per telephone line. If the
total REN of 4 is exceeded, the telephone may not
ring. With different telephone types there is no
guarantee of ringing, even when the REN is less
than 4.
If you would like a copy of the Declaration
of Conformity please visit:
WARNING
Only use the approved power supply, item code
042168 for the main base and 042169 for the
additional handset charger.
Only use approved AAA NiMH rechargeable batteries.
Do not immerse batteries in water or throw them
into a fire, or dispose of them with ordinary
domestic refuse. Please dispose of batteries
as instructed.
BT accepts no responsibility for damage caused
to your BT Freestyle 335 by using any other types
of batteries.
There is a risk of explosion if incorrect batteries
are fitted.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182 or email [email protected]
Offices worldwide
The services described in this publication are subject to availability
and may be modified from time to time. Services and equipment
are provided subject to British Telecommunications plc’s respective
standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2008.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China.
BT Freestyle 335 (03/08) Issue 1
|